Hi, I've been a long time lurker on these forums, now reporting back as there were some other Glo users (@alonemrinal, @Semwize) with challenges... Although I could not get KoboRoot-ScreenSaver-4.x-20160918.zip as attached to the first post to work, the version KA1-4.2.8283-ScreenSaver-experiment2.zip as
attached to this post works perfect on my Glo with firmware 4.5.9587 (together with
nightmode and a bunch of
GeoffR's patches).
For what it's worth (I'm not sure if these scanlines can be reused?), here are my scanlines on a Kobo Glo with firmware 4.5.9587:
Code:
#
# Standby scanline autodetected Sat Jul 29 07:12:49 CEST 2017
# If this value does not work, remove it so it will be re-detected.
#
standby=906:ffffffff*ff242424ff000000*ff2f2f2fff9b9b9bffffffff*fff4f4f4ff000000*ffabababffffffff*ff2f2f2fff000000*ffaaaaaaffffffff*ff525252ff000000*ff5d5d5dffffffff*ff2f2f2fff000000*ffaaaaaaffffffff*ff525252ff000000*ff5d5d5dffffffff*ffa1a1a1ff000000*ff4a4a4affb1b1b1ffe9e9e9fff1f1f1ffcacacaff555555ff000000*ff1d1d1dfff6f6f6ffffffff*ff9b9b9bff000000*ffa7a7a7ffffffff*ffadadadff000000*ffa3a3a3ff000000ff5d5d5dffb8b8b8ffcbcbcbff737373ff000000*ff3b3b3bffffffff*ffcdcdcdff000000*ffc5c5c5ffffffff*ffb1b1b1ff000000*ffc6c6c6ffffffff*
#
# Poweroff scanline autodetected [1] Sat Jul 29 07:13:20 CEST 2017
# If this value does not work, remove it so it will be re-detected.
#
poweroff=906:ff000000*ff0b0b0bffffffff*ffdadadaff000000*ff303030ffffffff*ff3d3d3dff000000*ffc2c2c2ffffffff*ffa8a8a8ff000000*ff9e9e9effffffff*ffd7d7d7ff000000*ffccccccffffffff*ff000000*ff515151ffffffff*ff666666ff000000*ffe7e7e7ffffffffff424242ff000000*ffd0d0d0ffffffff*ff555555ff000000*ffadadadffffffff*ffa2a2a2ff000000*ff545454ffffffff*ff9a9a9affffffffff989898ff2c2c2cffcfcfcfffffffff*ff030303ff000000*ffd0d0d0ffffffff*ff555555ff000000*ffadadadffffffff*ffa2a2a2ff000000*ffa3a3a3ffffffff*ffe2e2e2ff282828ff000000*ff5d5d5dffffffff*ff4f4f4fff000000*ffc2c2c2ffffffff*ffa8a8a8ff000000*ff9e9e9effffffff*ffd7d7d7ff000000*ff0b0b0bffffffff*ff585858ff000000*ff0b0b0bffffffff*ff585858ff000000*
@frostschutz: good stuff
Maybe that experiment2 version could be mentioned/linked in the first post as working for all devices except the KA1. I think it's currently overlooked/interpreted as being *only* for the KA1, not for any of the other devices with new firmwares...