MobileRead Forums - View Single Post - KPW3-32 debricking

knc1 · 06-08-2017, 11:41 PM

No, you can not run 'bist' in the internal RAM, 'bist' requires more RAM than the SoC has.
You must get the external RAM running before you can load and run 'bist'.

You are restricted to the commands available to the 'mini-build' of uboot.
So list them and copy the result so we can see what you have to work with.

Note:
Just because I missed one fact in the print-out does not mean everything I wrote in that post was wrong.
No need to re-read it, I have just repeated myself here.

PS:
And put that thing on a charger before you trigger a self destruct situation in the eMMC:
battery voltage: 3846 mV

06-08-2017, 11:41 PM	#39
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	No, you can not run 'bist' in the internal RAM, 'bist' requires more RAM than the SoC has. You must get the external RAM running before you can load and run 'bist'. You are restricted to the commands available to the 'mini-build' of uboot. So list them and copy the result so we can see what you have to work with. Note: Just because I missed one fact in the print-out does not mean everything I wrote in that post was wrong. No need to re-read it, I have just repeated myself here. PS: And put that thing on a charger before you trigger a self destruct situation in the eMMC: battery voltage: 3846 mV Last edited by knc1; 06-08-2017 at 11:44 PM.