Quote:
Originally Posted by geekraver
Screen was not responsive to touch so I could not select 'Correct'. Eventually after about 3 or 4 rounds Nickel started. Files are attached.
|
There are several possibilities why up to now KSM did not seem to register touches on the H2O Ed. 2:
- the font size is too small to select a menu entry
- for some reasons the touch coordinates do not match the screen coordinates
- for some reasons the touch/mouse driver does not work
I upload a test package, and hope that this will help finding the cause.
Install it like you did with the others packages.
When booting into KSM the test will start:
- you will see the message "touch input test" (screen_01.png)
- touch the screen, if we are lucky there will be displayed the touch coordinates (for instance, screen_02.png [I touched somewhere close to the top left corner] and screen_03.png [I touched somewhere close to the bottom right corner])
- touch the screen several times at different positions, do it systematically so that we later can understand how the actual touch positions compare to the registered positions (if there is anything registered at all)
- the test will terminate after 30 seconds or so
- 20 seconds later nickel will be started
This test runs only once to prevent further inconvenience. If you want to run it again, delete the file .adds/kbmenu_user/_skiptouchinputtest.txt
The test will create log files (touchinputtest_*.txt).