View Single Post
Old 04-20-2017, 09:04 PM   #14
motiv8d
Member
motiv8d began at the beginning.
 
Posts: 19
Karma: 10
Join Date: Apr 2017
Device: Kindle Keyboard 3 Wifi B008
Hi knc1

Thanks for your reply. I will do my best to clarify. I am guessing the confusion could be due to the subsequent install of 3.4.2 update post Kubric?

I am well aware that the FAQ for Kubric states that K3 is jailbroken. Just not my experience

The duration of kubric process I cannot say exactly, but it would have been close to 4 hours.

Prior to kubric, my firmware version was 3.4.2.
After kubric it was 3.4.
I could not get MKK .bin to install after this. You suggested to register as I noted it was not registered at that time.
I could not connect to wifi with it.
So I then installed the update from Amazon of 3.4.2.
I was then able to connect to wifi and register.

The Kubrick DVD I obtained from here (I just confirmed this by re-downloading and comparing the md5):
https://www.mobileread.com/forums/sh...d.php?t=206064 and specifically http://ixtab.tk/kubrick-k3-k4-k5.zip

Code:
#md5sum boot.iso 
5a8382450a2f239fc27fbbb3c7b24e76  boot.iso
#md5sum kubrick-k3-k4-k5-ISO-DVD.zip 
1140067d372e0ac8b3627fd799519ddc  kubrick-k3-k4-k5-ISO-DVD.zip
#ls -laht
784M Apr 15 11:41 kubrick-k3-k4-k5-ISO-DVD.zip
784M Aug  4  2013 boot.iso
After that after not being able to install MKK .bin, or use KUAL, I installed the following to gain wifi access and register:
Code:
#ls -laht
2.2M Apr 15 11:25 Amazon Update Update_kindle_3.4_3.4.2_B008.bin
#md5sum Amazon\ Update\ Update_kindle_3.4_3.4.2_B008.bin 
cb152c924f2ed61ef3223efb8f4ef959  Amazon Update Update_kindle_3.4_3.4.2_B008.bin
This was from https://www.amazon.com/gp/help/custo...g=thedigrea-20
and specifically https://s3.amazonaws.com/G7G_Firmwar...3.4.2_B008.bin

I have just checked the DVD I burned to use Kubrick of all the MD5sums of each individual file based on the md5sum list burned onto the DVD from the image. Two files failed the check.
Code:
#md5sum -c md5sum.txt | grep -vi 'OK$'
boot/isolinux/boot.cat: FAILED
boot/isolinux/isolinux.bin: FAILED
md5sum: WARNING: 2 computed checksums did NOT match
#md5sum boot/isolinux/boot.cat && cat md5sum | grep -i boot.cat
995f2867af47135b7c58a125a20fd3e8  boot/isolinux/boot.cat
184040516e41b4ecc95e699d4e1a9843  boot/isolinux/boot.cat
#md5sum boot/isolinux/isolinux.bin && cat md5sum | grep -i isolinux.bin
ad9b8227fd6599c5063dd34349be4ff9  boot/isolinux/isolinux.bin
19fed27714d24da7e14f07fc47c9616b  boot/isolinux/isolinux.bin
Thanks

Jesse

Last edited by motiv8d; 04-20-2017 at 09:42 PM. Reason: Add source location for 3.4.2 update & md5sum info for each file on DVD
motiv8d is offline   Reply With Quote