Hello, sorry for the long silence, but I had a lot to deal with in my "real" life.
I tried to flash again with the recovery menu (first I, then O, and E, copy update file via usb)
I made two tries: first, I then pressed U to update, it stays stuck at nearly 90%
Code:
data.stgz 43380562 [#########:::::::::::::::::::::::::::::]
data.stgz 43511594 [#########:::::::::::::::::::::::::::::]
data.stgz 43642626 [#########:::::::::::::::::::::::::::::]
data.stgz 43773658 [#########:::::::::::::::::::::::::::::]
data.stgz 43904690 [#########:::::::::::::::::::::::::::::]
data.stgz 44035722 [#########:::::::::::::::::::::::::::::]
data.stgz 44166754 [#########:::::::::::::::::::::::::::::]
data.stgz 44297786 [#########:::::::::::::::::::::::::::::]
data.stgz 44428818 [#########:::::::::::::::::::::::::::::]
data.stgz 44559850 [#########:::::::::::::::::::::::::::::]
data.stgz 44690882 [#########:::::::::::::::::::::::::::::]
data.stgz 44821914 [#########:::::::::::::::::::::::::::::]
data.stgz 44952946 [#########:::::::::::::::::::::::::::::]
data.stgz 45083978 [#########:::::::::::::::::::::::::::::]
data.stgz 45215010 [#########:::::::::::::::::::::::::::::]
data.stgz 45346042 [#########:::::::::::::::::::::::::::::]
data.stgz 45477074 [#########:::::::::::::::::::::::::::::]
data.stgz 45608106 [#########:::::::::::::::::::::::::::::]
data.stgz 45739138 [#########:::::::::::::::::::::::::::::]
data.stgz 45870170 [#########:::::::::::::::::::::::::::::]
data.stgz 46001202 [#########:::::::::::::::::::::::::::::]
data.stgz 46132234 [#########:::::::::::::::::::::::::::::]
data.stgz 46263266 [#########:::::::::::::::::::::::::::::]
data.stgz 46394298 [#########:::::::::::::::::::::::::::::]
data.stgz 46525330 [#########:::::::::::::::::::::::::::::]
data.stgz 46656362 [#########:::::::::::::::::::::::::::::]
data.stgz 46787394 [#########:::::::::::::::::::::::::::::]
data.stgz 46918426 [#########:::::::::::::::::::::::::::::]
data.stgz 47049458 [#########:::::::::::::::::::::::::::::]
data.stgz 47180490 [##########::::::::::::::::::::::::::::]
data.stgz 47311522 [##########::::::::::::::::::::::::::::]
data.stgz 47442554 [##########::::::::::::::::::::::::::::]
data.stgz 47573586 [##########::::::::::::::::::::::::::::]
data.stgz 47704618 [##########::::::::::::::::::::::::::::][ 302.677698]
[ 302.677707] ADC value out of thermistor range! setting display temp to 3 deg C
data.stgz 47835650 [##########::::::::::::::::::::::::::::]
data.stgz 47966682 [##########::::::::::::::::::::::::::::][ 362.836124]
[ 362.836146] ADC value out of thermistor range! setting display temp to 3 deg C
[ 422.996033]
[ 422.996041] ADC value out of thermistor range! setting display temp to 3 deg C
[ 449.349825] KERNEL: I pmic:charger chgina::charger connected
[ 449.372419] otg udc vbus rising wakeup
[ 449.377965] try_wake_up_udc: udc out low power mode
[ 449.831409] g_file_storage gadget: high speed config #1
[ 483.155303]
[ 483.155310] ADC value out of thermistor range! setting display temp to 3 deg C
[ 543.315279]
[ 543.315287] ADC value out of thermistor range! setting display temp to 3 deg C
[ 603.475267]
[ 603.475275] ADC value out of thermistor range! setting display temp to 3 deg C
[ 663.635284]
[ 663.635292] ADC value out of thermistor range! setting display temp to 3 deg C
[ 723.795085]
[ 723.795093] ADC value out of thermistor range! setting display temp to 3 deg C
and that's it. I made a second try after an hard reboot, but instead of pressed u, I exit the diags menu, when I reboot, the system detects the update file and installs it, with success, but I'm back to previous error (partitionning it seems).
I'm running out of ideas... do you have any insight to help me?
And by the way, did you manage to save your data with your raid mostly out ?