Good day
I have a device amazon kindle dx graphite
I use it as a monitor through the VNC (kindlevncviewer)
Can I change the device driver for the fps to be more
In this time approximately 1 fps / per second
files:
/lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/legacy$ modinfo eink_fb_shim
filename: /lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/legacy/eink_fb_shim.ko
license: GPL
author: Lab126
description: eInk Legacy-to-HAL shim
depends: eink_fb_hal
vermagic: 2.6.22.19-lab126 preempt mod_unload ARMv6
parm: show_logo:non-zero to show logo (int)
parm: splash_screen_up:sets which splash screen is currently up (int)
/lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/legacy$ modinfo eink_fb_hal_emu
filename: /lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/hal/eink_fb_hal_emu.ko
license: GPL
author: Lab126
depends: eink_fb_hal
vermagic: 2.6.22.19-lab126 preempt mod_unload ARMv6
parm: emu_bpp:1, 2, 4, or 8 (long)
parm: emu_orientation:0 (portrait) or 1 (landscape) (int)
parm: emu_size:0 (default, 6-inch), 6 (6-inch), or 9 (9.7-inch) (int)
/lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/legacy$ modinfo eink_fb_hal
filename: /lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/hal/eink_fb_hal.ko
license: GPL
author: Lab126
depends:
vermagic: 2.6.22.19-lab126 preempt mod_unload ARMv6
parm: einkfb_logging:non-zero to enable debugging (long)
parm: einkfb_hw_shutdown_mode:non-zero to fully shut down hardware (int)
parm: einkfb_hw_bringup_mode:non-zero to fully bring up hardware (int)
/lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/legacy$ modinfo eink_fb_hal_broads
filename: /lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/hal/eink_fb_hal_broads.ko
license: GPL
author: Lab126
depends: eink_fb_hal
vermagic: 2.6.22.19-lab126 preempt mod_unload ARMv6
parm: bs_bootstrap:non-zero to bootstrap (int)
parm: bs_bpp:2, 4, or 8 (long)
parm: bs_orientation:0 (portrait) or 1 (landscape) (int)
parm: bs_upside_down:0 (not upside down) or 1 (upside down) (int)
https://yadi.sk/d/WVIfQczJ3G333r - files *.KO driver
https://yadi.sk/d/eRgmYMw43G33GY - driver source code