MobileRead Forums - View Single Post

knc1 · 02-20-2017, 09:34 PM

How long did you let it show you the tree?
Loading the correct firmware is slow, loading the wrong firmware is really slowwwwww.
Connect to a wall charger and let it set over night.

- - - - -

Disconnect the battery.
When you have everything setup and ready - put battery back in.
You may have to use an external reference 1.8v for the adapter, since you are starting by turning on the power.

A new Lithium / Iron-Disulfide (Energizer Ultimate Lithium) has an open terminal voltage of 1.8v - exactly what you need for the adapter reference.

02-20-2017, 09:34 PM	#2
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	How long did you let it show you the tree? Loading the correct firmware is slow, loading the wrong firmware is really slowwwwww. Connect to a wall charger and let it set over night. - - - - - Disconnect the battery. When you have everything setup and ready - put battery back in. You may have to use an external reference 1.8v for the adapter, since you are starting by turning on the power. A new Lithium / Iron-Disulfide (Energizer Ultimate Lithium) has an open terminal voltage of 1.8v - exactly what you need for the adapter reference. Last edited by knc1; 02-20-2017 at 09:47 PM.