Quote:
Originally Posted by girlwithabook
So there's two ways to do a reset, quick and factory.
Quick reset:
Hold power button until "Powered off" screen appears, let go. (sometimes, if device is unresponsive, it might just go black)
Wait 5-6 seconds
Hold power button again for about 10-20 seconds, or until indicator light flashes blue/green, then immediately let go, device refreshes.
Factory Reset (This is from the user guide instructions)
Performing a manual factory reset
If a factory reset didn't solve your problem, you can try a manual factory reset to restore your eReader to its original settings. After a manual factory reset, you'll need to set up and sync your eReader again. Before you start, charge your eReader for 3 hours.
1. Turn on your computer.
2. Connect the USB power cord to your eReader and computer.
3. Press and hold the power button to turn off your eReader.
4. Wait for the power light on the top-right corner of your eReader to turn off.
5. Press and hold the power button on your eReader for 30 seconds.
6. Wait for the Restore screen to appear. Your eReader screen will turn black and begin the restoring process. After the restoring process finishes, follow the onscreen instructions to set up your eReader. You'll need access to an active Wi Fi or internet connection to complete setup.
Hopefully that clears things up  . |
Hmmm... does the Aura One respond to the tap both bottom corners of the screen during power on to trigger a factory reset when the device is unable to boot to the GUI?