recover menu
choose:I. Initialize Partition Table (fdisk) and format FAT
Spoiler:
===========================
U-Boot 2009.08-lab126 (Nov 16 2013 - 00:08:09)
CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 47 C, calibration data 0x5915125f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Pinot WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: 02722011345600A1
S/N: 905A220634860EDP
I2C: ready
DRAM: 256 MB
Using default environment
In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0xfff0000
POST done in 60 ms
Battery voltage: 3819 mV
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2425788 Bytes = 2.3 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.095348] boot: C def:bcut:batterycut=1
[ 0.268229] LPDDR2 MfgId: 0x1 [Samsung]
3.0.35-lab126 #1 Sat Nov 16 00:25:44 PST 2013 armv7l
Press [ENTER] for recovery menu... 0 /Charge: 14% [#########::::::::::::::::::::::::::::::::::::::::: ::::::::]
Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 3 |
Unknown option '3'
Charge: 14% [#########::::::::::::::::::::::::::::::::::::::::: ::::::::]
Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 5 -i
/dev/mmcblk0:
CHS=4/16/120832 size=3959422976 bytes
flag type first last lba first lba size
Partition p1:
0x80 0x83 <large> <large> 65536 716800
CHS: <large>
- <large>
Partition p2:
0x00 0x83 <large> <large> 782336 131072
CHS: <large>
- <large>
Partition p3:
0x00 0x83 <large> <large> 913408 131072
CHS: <large>
- <large>
Partition p4:
0x00 0x0b <large> <large> 1044480 6688768
CHS: <large>
- <large>
Rereading partition information ...
[ 25.487349] mmcblk0: error -110 transferring data, sector 65536, nr 64, cmd response 0x900, card status 0xd00
[ 25.497340] end_request: I/O error, dev mmcblk0, sector 65536
[ 25.503109] Buffer I/O error on device mmcblk0, logical block 8192
[ 25.510248] end_request: I/O error, dev mmcblk0, sector 65544
[ 25.516015] Buffer I/O error on device mmcblk0, logical block 8193
[ 25.523058] end_request: I/O error, dev mmcblk0, sector 65552
[ 25.528822] Buffer I/O error on device mmcblk0, logical block 8194
[ 25.535850] end_request: I/O error, dev mmcblk0, sector 65560
[ 25.541614] Buffer I/O error on device mmcblk0, logical block 8195
[ 25.548642] end_request: I/O error, dev mmcblk0, sector 65568
[ 25.554404] Buffer I/O error on device mmcblk0, logical block 8196
[ 25.561433] end_request: I/O error, dev mmcblk0, sector 65576
[ 25.567196] Buffer I/O error on device mmcblk0, logical block 8197
[ 25.574218] end_request: I/O error, dev mmcblk0, sector 65584
[ 25.579981] Buffer I/O error on device mmcblk0, logical block 8198
[ 25.586997] end_request: I/O error, dev mmcblk0, sector 65592
[ 25.592759] Buffer I/O error on device mmcblk0, logical block 8199