|
Hello! The internal SD Card of my kobo touch is broken. Anyone can send me the image so i can create a new compatible SD Card?
My KOBO TOUCH reader is not seen by the computer.
The USB port is OK. The USB cable is OK. Help Me please.
SN: N905E27303778
Product no: N905-JPR-S
version: N905E27303778,2.6.35.3,1.9.18,2.6.35.3,2.6.35.3,00 000000-0000-0000-0000-000000000310
Log from UART:
U-Boot 2009.08-dirty-svn (12жњ€ 13 2011 - 16:52:29)
CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 200000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
Board: MX50 RDP board
Boot Reason: [POR]
Boot Device: SD
I2C: ready
DRAM: 256 MB
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
In: serial
Out: serial
Err: serial
MMC read: dev # 0, block # 1023, count 1 partition # 0 ...
1 blocks read: OK
MMC read: dev # 0, block # 1024, count 1 partition # 0 ...
1 blocks read: OK
[only 1 key]
0 keys,0x00,0x00
0 keys,0x00,0x00
0 keys,0x00,0x00
0 keys,0x00,0x00
ram p=70000000,size=268435456
MMC read: dev # 0, block # 1023, count 1 partition # 0 ...
1 blocks read: OK
MMC read: dev # 0, block # 1024, count 1 partition # 0 ...
1 blocks read: OK
MMC read: dev # 0, block # 18431, count 1 partition # 0 ...
1 blocks read: OK
MMC read: dev # 0, block # 14335, count 1 partition # 0 ...
1 blocks read: OK
MMC read: dev # 0, block # 14336, count 1901 partition # 0 ...
1901 blocks read: OK
Kernel RAM visiable size=255M->255M
Hit any key to stop autoboot: 0
MMC read: dev # 0, block # 2047, count 1 partition # 0 ...
1 blocks read: OK
cmd=mmc read 0 0x778205a0 0x7ff 0x1
no kernel image signature !
cmd=mmc read 0 0x70800000 0x800 0x1800
MMC read: dev # 0, block # 2048, count 6144 partition # 0 ...
6144 blocks read: OK
## Booting kernel from Legacy Image at 70800000 ...
Image Name: Linux-2.6.35.3-850-gbc67621+
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1904568 Bytes = 1.8 MB
Load Address: 70008000
Entry Point: 70008000
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
epdc_init_sequence(994) : epd_power_on request fail !
1+0 records in
1+0 records out
512 bytes (512B) copied, 0.002537 seconds, 197.1KB/s
cannot open /dev/null
dosfsck 3.0.6, 04 Oct 2009, FAT32, LFN
/dev/mmcblk0p3: 110 files, 1264/348630 clusters
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
(none) login: ApplicationBase::switchTranslator::loading locale: ":/translations/trans_en_US"
Translator is empty! Do you have translation files for this locale?
sh: you need to specify whom to kill
sh: you need to specify whom to kill
sh: you need to specify whom to kill
sh: you need to specify whom to kill
sh: you need to specify whom to kill
> WebSyncScheduler: scheduleTimer: No need to schedule a sync
> Warning: You haven't called pageView yet: "5(Settings*Set%20View%20Type*List)"
> FSCheckThread: dbMalformed: false fsCorrupted: false
void PlugWorkflowManager::ac_plugged()
|