Quote:
Originally Posted by kingjohn
Kindle was on the charger for 2 days now... should be full (after some time, the light went off.... and came on again after replugging)
Currently I don't need to press the on button and then the magic key anymore... kubrick recognizes the kindle as soon as I plug it in.
strange.....
If the kindle is switched off and no cable connected, I cant make it boot in any way... so pressing a button doesn't help. display and light stay both off.
(with display off I mean: it still says: please be patient while your kindle is starting"  )
dmesg displays a lot of things. What should I look for?
but it for sure will be recognized, otherwise kubrick would not say: "device ready", would it?
afterwards, on the fastoot page, it still says "waiting for device".....
edit:
dmesg: finds apart from many other things this:
NS Blank CODEX
Freescale SemiConductor Inc
is this the kindle?
This now shows also up in Windows. I managed to install the libusb-win32-bin-1.2.6.0
driver somehow.....
If I switch back and forth with power and magic button, in windows, I still get an unknown USB device
, that has VID_0000&PID_0000
This device has stopped, according to windows.....
could it be that there is some important data gone on the kindle? |
"NS Blank Codex" is your Kindle. It's usually called this when the Kindle is in a low-level state like diags mode (if you don't know what that is, ignore it). Try running down the power until you're sure that your Kindle's battery is totally dead if that's even possible. Then, charge it for around 48 hours. That's what worked for my Kindle.