|
Member
Posts: 24
Karma: 12
Join Date: Jul 2016
Device: k4nt, T63HD-JD
|
Perfect, ghosting is gone!
recovery.log:
Code:
Starting TWRP 2.8.1.0 By Nightboy on Sun Jul 10 19:54:50 2016
I:=> product model: 'rk30sdk'
I:=> using device id: 'rk30sdk'
BOARD_HAS_NO_REAL_SDCARD := true
TW_NO_CPU_TEMP := true
I:Lun file '/sys/devices/virtual/android_usb/android0/f_mass_storage/lun/file'
I:TW_BRIGHTNESS_PATH := /sys/devices/platform/rk29_backlight/backlight/rk28_bl/brightness
I:Found brightness file at '/sys/devices/platform/rk29_backlight/backlight/rk28_bl/brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 255
Starting the UI...ebc_init: vwidth=1448 vheight=1072
Pixel format: 1448x1072 @ 16bpp
Pixel format: RGB_565
Not using qualcomm overlay, 'fb0'
framebuffer: fd 4 (1448 x 1072)
=> Linking mtab
=> Processing recovery.fstab
I:Processing '/kernel'
I:Processing '/misc'
I:Processing '/boot'
I:Processing '/recovery'
I:Processing '/cache'
I:Processing '/system'
I:Processing '/data'
I:Processing '/sdcard'
I:Processing '/external_sd'
I:Created '/and-sec' folder.
I:Creating Android Secure: /sdcard/.android_secure
I:mount '/sdcard/.android_secure' '/and-sec' process ended with RC=0
I:Backup folder set to '/sdcard/TWRP/BACKUPS/rk30sdk'
I:Settings storage is '/sdcard'
Updating partition details...
I:Unable to mount '/external_sd'
I:Actual block device: '', current file system: 'vfat'
I:Unmounting main partitions...
Partition Logs:
/kernel | /dev/block/mtdblock2 | Size: 8MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mtdblock2
Display_Name: Kernel
Storage_Name: Kernel
Backup_Path: /kernel
Backup_Name: kernel
Backup_Display_Name: Kernel
Storage_Path: /kernel
Current_File_System: mtd
Fstab_File_System: mtd
MTD_Name: kernel
Backup_Method: flash_utils
/misc | /dev/block/mtdblock1 | Size: 4MB
Flags: IsPresent
Primary_Block_Device: /dev/block/mtdblock1
Display_Name: Misc
Storage_Name: Misc
Backup_Path: /misc
Backup_Name: misc
Backup_Display_Name: Misc
Storage_Path: /misc
Current_File_System: mtd
Fstab_File_System: mtd
MTD_Name: misc
Backup_Method: flash_utils
/boot | /dev/block/mtdblock3 | Size: 16MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mtdblock3
Display_Name: Boot
Storage_Name: Boot
Backup_Path: /boot
Backup_Name: boot
Backup_Display_Name: Boot
Storage_Path: /boot
Current_File_System: mtd
Fstab_File_System: mtd
MTD_Name: boot
Backup_Method: flash_utils
/recovery | /dev/block/mtdblock4 | Size: 32MB
Flags: Can_Be_Backed_Up IsPresent
Primary_Block_Device: /dev/block/mtdblock4
Display_Name: Recovery
Storage_Name: Recovery
Backup_Path: /recovery
Backup_Name: recovery
Backup_Display_Name: Recovery
Storage_Path: /recovery
Current_File_System: mtd
Fstab_File_System: mtd
MTD_Name: recovery
Backup_Method: flash_utils
/cache | /dev/block/mtdblock6 | Size: 125MB Used: 4MB Free: 121MB Backup Size: 4MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent
Primary_Block_Device: /dev/block/mtdblock6
Display_Name: Cache
Storage_Name: Cache
Backup_Path: /cache
Backup_Name: cache
Backup_Display_Name: Cache
Storage_Path: /cache
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/system | /dev/block/mtdblock9 | Size: 511MB Used: 359MB Free: 151MB Backup Size: 359MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent Ignore_Blkid
Primary_Block_Device: /dev/block/mtdblock9
Display_Name: System
Storage_Name: System
Backup_Path: /system
Backup_Name: system
Backup_Display_Name: System
Storage_Path: /system
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
Mount_Flags=0x 0, Mount_Options=barrier=1,discard
/data | /dev/block/mtdblock7 | Size: 1007MB Used: 69MB Free: 938MB Backup Size: 69MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Encrypt_Backup Use_Userdata_Encryption
Primary_Block_Device: /dev/block/mtdblock7
Display_Name: Data
Storage_Name: Data
Backup_Path: /data
Backup_Name: data
Backup_Display_Name: Data
Storage_Path: /data
Current_File_System: ext4
Fstab_File_System: ext4
Backup_Method: files
/sdcard | /dev/block/mtdblock10 | Size: 5686MB Used: 1090MB Free: 4595MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent Has_Android_Secure Is_Storage Is_Settings_Storage
Symlink_Path: /sdcard/.android_secure
Symlink_Mount_Point: /and-sec
Primary_Block_Device: /dev/block/mtdblock10
Display_Name: InternalSDcard
Storage_Name: InternalSDcard
Backup_Path: /and-sec
Backup_Name: and-sec
Backup_Display_Name: Android Secure
Storage_Path: /sdcard
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
/external_sd | | Size: 0MB Used: 0MB Free: 0MB Backup Size: 0MB
Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable Is_Storage
Primary_Block_Device: /dev/block/mmcblk0p1
Alternate_Block_Device: /dev/block/mmcblk0
Display_Name: MicroSDcard
Storage_Name: MicroSDcard
Backup_Path: /external_sd
Backup_Name: external_sd
Backup_Display_Name: MicroSDcard
Storage_Path: /external_sd
Current_File_System: vfat
Fstab_File_System: vfat
Backup_Method: files
I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/sdcard/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:PageSet::CheckInclude loading filename: ''
I:Loading included resources...
I:Loading included variables...
I:Loading mouse cursor...
I:Loading included pages...
I:Loading page main
I:Loading page main2
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page install
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page flash_confirm
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page flash_zip
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page flash_done
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page clear_vars
I:Loading page confirm_action
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page action_page
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page singleaction_page
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page action_complete
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page reboot
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page selectstorage
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page mount
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page usb_mount
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page usb_umount
I:Loading page wipe
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page advancedwipe
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page formatdata
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page refreshfilesystem
I:Loading page selectfilesystem
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page backup
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page backupname1
I:Loading page backupname2
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page backupencryption
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page backupencryption2
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page restore
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page restore_read
I:Loading page restore_decrypt
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page try_restore_decrypt
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page restore_select
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page renamebackup
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page restore_run
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page settings
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page timezone
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page screen
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page Vibrate
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page advanced
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page partsdcard
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page htcdumlock
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page lock
I:Loading page filemanagerlist
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filemanageroptions
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page choosedestinationfolder
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filemanagerrenamefile
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filemanagerrenamefolder
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filemanagerchmod
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filemanagerconfirm
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filemanageracction
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page decrypt
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page trydecrypt
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page terminalfolder
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page terminalcommand
I:Loading page sideload
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page installsu
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
No SELinux support (no libselinux).
Set boot command "boot-recovery"
Startup Commands:
ro.boot.console=ttyFIQ0
ro.serialno=
ro.bootmode=unknown
ro.baseband=unknown
ro.bootloader=unknown
ro.hardware=rk30board
ro.revision=0
ro.emmc=0
ro.boot.emmc=0
ro.factorytest=0
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=adb
ro.build.id=JDQ39E
ro.build.display.id=cm_rk3026-eng 4.2.2 JDQ39E 2eee213337 test-keys
ro.build.version.incremental=2eee213337
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Sun Jul 3 09:17:31 CDT 2016
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=user
ro.build.host=user-pc
ro.build.tags=test-keys
ro.product.model=rk30sdk
ro.product.brand=rockchip
ro.product.name=cm_rk3026
ro.product.device=rk3026
ro.product.board=rk30sdk
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Rockchip
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=rk3026
ro.build.product=rk3026
ro.build.description=cm_rk3026-eng 4.2.2 JDQ39E 2eee213337 test-keys
ro.build.fingerprint=rockchip/cm_rk3026/rk3026:4.2.2/JDQ39E/2eee213337:eng/test-keys
ro.build.characteristics=default
ro.cm.device=rk3026
ro.device.name=T63
init.svc.ueventd=running
init.svc.linkMTD=stopped
init.svc.recovery=running
init.svc.adbd=restarting
service.adb.root=1
twrp.crash_counter=0
ro.twrp.boot=1
ro.twrp.version=2.8.1.0 By Nightboy
I:Copying file /cache/recovery/log to /cache/recovery/last_log
Set boot command ""
I:Attempt to load settings from settings file...
I:Loading settings from '/sdcard/TWRP/.twrps'.
I:Backup folder set to '/sdcard/TWRP/BACKUPS/rk30sdk'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:Unable to mount '/external_sd'
I:Actual block device: '', current file system: 'vfat'
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:Enabling MTP during startup
I:Starting MTP
twrp addStorage /sdcard, mtpstorageid: 65537
Starting MTP
created new mtpserver object
adding internal storage
MtpStorage id: 65537 path: /sdcard
MTP Enabled
I:Switching packages (TWRP)
E:inotify_add_watch failed: Invalid argument
MtpServer::run fd: 14
I:Starting command line thread
I:Skipping screen timeout threads: TW_NO_SCREEN_TIMEOUT is set
recovery dmesg:
Code:
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.0.36+ (builder@builder) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #8 SMP PREEMPT Thu May 26 17:36:05 HKT 2016
<4>[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: RK30board
<6>[ 0.000000] memory reserve: Memory(base:0x7ff00000 size:1M) reserved for <ebc waveform buf>
<6>[ 0.000000] memory reserve: Memory(base:0x7ed00000 size:18M) reserved for <fb0 buf>
<6>[ 0.000000] memory reserve: Memory(base:0x7d900000 size:20M) reserved for <ion>
<6>[ 0.000000] memory reserve: Total reserved 39M
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<6>[ 0.000000] bootconsole [earlycon0] enabled
<4>[ 0.000000] CPU SRAM: copied sram code from c0b3f000 to fef00010 - fef01aa8
<4>[ 0.000000] CPU SRAM: copied sram data from c0b40a98 to fef01aa8 - fef01c8c
<4>[ 0.000000] rk2928_clock_data_init version: 2013-7-17
<6>[ 0.000000] rk3026 soc version:4
<6>[ 0.000000] L310 cache controller enabled
<6>[ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c9, AUX_CTRL 0x76030001, Cache size: 262144 B
<4>[ 0.000000] DDR DEBUG: version 1.01 20140303
<4>[ 0.000000] DDR DEBUG: 1 CS, ROW=15, Bank=8, COL=10, Total Capability=512MB
<4>[ 0.000000] DDR DEBUG: init success!!! freq=396MHz
<4>[ 0.000000] DDR DEBUG: left channel:Dllsel=3, Ophsel=1, Cycsel=1
<4>[ 0.000000] DDR DEBUG: right channel:Dllsel=2, Ophsel=1, Cycsel=1
<4>[ 0.000000] DDR DEBUG: DRV Pull-Up=0x6, DRV Pull-Dwn=0x7
<4>[ 0.000000] DDR DEBUG: ODT Pull-Up=0x1, ODT Pull-Dwn=0x0
<4>[ 0.000000] Boot mode: RECOVERY (2) flag: RECOVER (0xc3524203)
<7>[ 0.000000] On node 0 totalpages: 121088
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0b3c840, node_mem_map c0000000
<7>[ 0.000000] Normal zone: 976 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 120112 pages, LIFO batch:31
<4>[ 0.000000] HighMem zone: 48 pages exceeds realsize 0
<6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1699000 s6976 r8192 d13504 u32768
<7>[ 0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 120112
<5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 waveform_addr=0x7ff00000 init=/init initrd=0x62000000,0x003D0000 mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00040000@0x00040000(cache),0x00200000@0x00080000(userdata),0x00002000@0x00280000(kpanic),0x00100000@0x00282000(system),-@0x00382000(user) bootver=2016-04-12#2.32 firmware_ver=4.2.2
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 473MB = 473MB total
<5>[ 0.000000] Memory: 456832k/456832k available, 67456k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
<5>[ 0.000000] vmalloc : 0xdf000000 - 0xfe800000 ( 504 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xde800000 ( 488 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0408000 - 0xc0430000 ( 160 kB)
<5>[ 0.000000] .text : 0xc0430000 - 0xc0a2613c (6105 kB)
<5>[ 0.000000] .data : 0xc0a28000 - 0xc0b3e648 (1114 kB)
<5>[ 0.000000] .bss : 0xc0b41024 - 0xc1697d58 (11612 kB)
<6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:320
<4>[ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<4>[ 0.000000] rk_timer: version 1.3
<6>[ 0.003794] Calibrating delay loop (skipped) preset value.. 1199.60 BogoMIPS (lpj=5998045)
<6>[ 0.012982] pid_max: default: 32768 minimum: 301
<6>[ 0.018409] Mount-cache hash table entries: 512
<6>[ 0.024204] Initializing cgroup subsys debug
<6>[ 0.028990] Initializing cgroup subsys cpuacct
<6>[ 0.034029] Initializing cgroup subsys freezer
<6>[ 0.039027] CPU: Testing write buffer coherency: ok
<4>[ 0.142392] CPU1: Booted secondary processor
<6>[ 0.142446] Brought up 2 CPUs
<6>[ 0.150567] SMP: Total of 2 processors activated (2399.21 BogoMIPS).
<6>[ 0.158088] devtmpfs: initialized
<6>[ 0.168403] NET: Registered protocol family 16
<6>[ 0.173514] last_log: 0xdd500000 map to 0xdf004000 and copy to 0xc0b424a0 (version 2.1)
<4>[ 0.196722] DVFS MSG: AVS Value(index=0): 235 234 234 234 234 234 234 234 234 234
<6>[ 0.216777] lcdc0 is used as primary display device contoller!
<6>[ 0.223302] warning:lcdc1 not add to system!
<6>[ 0.328332] rk29sdk_wifi_bt_gpio_control_init: init finished
<6>[ 0.336043] console [ttyFIQ0] enabled, bootconsole disabled
<6>[ 0.345198] Registered FIQ tty driver dd489c00
<6>[ 0.345778] Loaded driver for PL330 DMAC--1 rk29-pl330
<6>[ 0.345822] DBUFF-64x8bytes Num_Chans-8 Num_Peri-14 Num_Events-16
<6>[ 0.366777] rk29xx_spim: driver initialized, fifo_len=32,bus_num=0
<6>[ 0.381990] bio: create slab <bio-0> at 0
<5>[ 0.386717] SCSI subsystem initialized
<6>[ 0.386965] usbcore: registered new interface driver usbfs
<6>[ 0.387103] usbcore: registered new interface driver hub
<6>[ 0.401312] usbcore: registered new device driver usb
<6>[ 0.401748] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
<6>[ 0.402084] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
<6>[ 0.402303] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
<6>[ 0.402451] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
<6>[ 0.438289] rk30-adc rk30-adc: rk30 adc: driver initialized
<6>[ 0.446523] axp_mfd 0-0034: AXP (CHIP ID: 0x06) detected
<6>[ 0.469112] input: axp22-supplyer as /devices/platform/rk30_i2c.0/i2c-0/0-0034/axp22-supplyer.20/input/input0
<4>[ 0.469191] axp charger not limit now
<4>[ 0.474145] axp battery hardware current direction 1
<3>[ 0.488904] [slr]N_VBUSEN io on axp is set to output
<4>[ 0.489372] axp battery hardware current direction 1
<4>[ 0.495168] now_rest_vol = 100
<4>[ 0.497147] rk30_adc_ebc_battery_check, enter...
<4>[ 0.497183] rk30_adc_battery_get_bat_vol, enter...
<4>[ 0.497221] rk30_adc_battery_get_bat_vol, ---axp_charger->vbat: 4236---
<6>[ 0.497611] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.498162] Bluetooth: Core ver 2.16
<6>[ 0.498241] NET: Registered protocol family 31
<6>[ 0.498277] Bluetooth: HCI device and connection manager initialized
<6>[ 0.498326] Bluetooth: HCI socket layer initialized
<6>[ 0.498364] Bluetooth: L2CAP socket layer initialized
<6>[ 0.498418] Bluetooth: SCO socket layer initialized
<6>[ 0.498705] cfg80211: Calling CRDA to update world regulatory domain
<4>[ 0.561026] rk fb probe ok!
<6>[ 0.561151] Switching to clocksource rk_timer
<6>[ 0.561815] Switched to NOHz mode on CPU #0
<6>[ 0.562437] Switched to NOHz mode on CPU #1
<4>[ 0.569677] lcdc0:reg_phy_base = 0x1010e000,reg_vir_base:0xdf0a4000
<4>[ 0.569781] fb0:win0
<4>[ 0.569787] fb1:win1
<4>[ 0.569793] fb2:win2
<4>[ 0.603608] fb0:phy:7ed00000>>vir:e0000000>>len:0x1200000
<4>[ 0.603901] rk_fb_register>>>>>fb0
<4>[ 0.612668] rk_fb_register>>>>>fb1
<4>[ 0.612703] rk3188 lcdc0 probe ok!
<6>[ 0.612948] [tps] tps65185_probe(772): I2C addr:68
<6>[ 0.791397] papyrus: detected device with ID=65 (TPS65185r1p2)
<6>[ 0.791717] [tps] tps65185_probe(788): tps65185_probe ok.
<4>[ 0.791799] i2c-core: driver [tps65185] using legacy suspend method
<4>[ 0.791845] i2c-core: driver [tps65185] using legacy resume method
<3>[ 0.815130] emmc emmc: internal_storage is NOT emmc
<6>[ 0.815388] NET: Registered protocol family 2
<6>[ 0.815561] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.815923] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.816300] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
<6>[ 0.816705] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.816753] TCP reno registered
<6>[ 0.816786] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.816848] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[ 0.817259] NET: Registered protocol family 1
<4>[ 0.817482] RK29 Backlight Driver Initialized.
<6>[ 0.817755] Unpacking initramfs...
<3>[ 0.911290] Failed to request 'BL_PWM'
<6>[ 1.107031] Freeing initrd memory: 3904K
<6>[ 1.107269] PMU: registered new PMU device of type 0
<4>[ 1.116185] rk3026 cpufreq version 2.2, suspend freq 504 MHz
<4>[ 1.122093] highmem bounce pool size: 64 pages
<6>[ 1.122289] ashmem: initialized
<6>[ 1.131962] fuse init (API version 7.16)
<6>[ 1.136798] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
<6>[ 1.136857] io scheduler noop registered
<6>[ 1.136895] io scheduler deadline registered
<6>[ 1.136982] io scheduler cfq registered (default)
<6>[ 1.157274] rga: Driver loaded succesfully
<4>[ 1.157504] rk_serial.c v1.4 2013-04-16
<6>[ 1.157616] rk_serial.0: ttyS0 at MMIO 0x20060000 (irq = 52) is a rk29_serial.0
<6>[ 1.157794] rk_serial rk_serial.0: membase 0xdf0a2000
<6>[ 1.158124] Rockchip ion module(version: 1.0) is successfully loaded
<6>[ 1.160642] loop: module loaded
<6>[ 1.160705] Android kernel panic handler initialized (bind=kpanic)
<4>[ 1.160747] i2c-test initialization.
<6>[ 1.161673] PPP generic driver version 2.4.2
<6>[ 1.161886] PPP Deflate Compression module registered
<6>[ 1.161925] PPP BSD Compression module registered
<6>[ 1.182580] PPP MPPE Compression module registered
<6>[ 1.182621] NET: Registered protocol family 24
<6>[ 1.182737] usbcore: registered new interface driver asix
<6>[ 1.182811] usbcore: registered new interface driver cdc_ether
<6>[ 1.182880] usbcore: registered new interface driver dm9620
<6>[ 1.182949] usbcore: registered new interface driver SR9700_android
<6>[ 1.183020] usbcore: registered new interface driver net1080
<6>[ 1.183088] usbcore: registered new interface driver cdc_subset
<6>[ 1.183156] usbcore: registered new interface driver zaurus
<6>[ 1.183206] cdc_ncm: 04-Aug-2011
<6>[ 1.183262] usbcore: registered new interface driver cdc_ncm
<4>[ 1.183300] Rockchip WiFi SYS interface (V1.00) ...
<6>[ 1.183372] Initializing USB Mass Storage driver...
<6>[ 1.183447] usbcore: registered new interface driver usb-storage
<6>[ 1.183488] USB Mass Storage support registered.
<6>[ 1.183637] usbcore: registered new interface driver usbserial
<6>[ 1.183704] USB Serial support registered for generic
<6>[ 1.183778] usbcore: registered new interface driver usbserial_generic
<6>[ 1.183821] usbserial: USB Serial Driver core
<6>[ 1.183878] USB Serial support registered for GSM modem (1-port)
<6>[ 1.183954] usbcore: registered new interface driver option
<6>[ 1.183992] option: v0.7.2:USB Driver for GSM modems
<4>[ 1.184093] ~~~~~~~~~~usb20otg_soft_reset
<6>[ 1.397252] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
<6>[ 1.397303] usb20_otg usb20_otg: DWC OTG Controller
<6>[ 1.397446] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
<6>[ 1.397524] usb20_otg usb20_otg: irq 42, io mem 0x00000000
<6>[ 1.397563] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
<6>[ 1.397656] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 1.397704] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.397752] usb usb1: Product: DWC OTG Controller
<6>[ 1.397785] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
<6>[ 1.397824] usb usb1: SerialNumber: usb20_otg
<6>[ 1.398268] hub 1-0:1.0: USB hub found
<6>[ 1.398307] hub 1-0:1.0: 1 port detected
<6>[ 1.399101] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xdf180000
<6>[ 1.609791] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[ 1.609840] usb20_host usb20_host: DWC OTG Controller
<6>[ 1.609917] usb20_host usb20_host: new USB bus registered, assigned bus number 2
<6>[ 1.609995] usb20_host usb20_host: irq 43, io mem 0x00000000
<6>[ 1.610074] DWC_OTG: Init: Port Power? op_state=1
<6>[ 1.610108] DWC_OTG: Init: Power Port (0)
<6>[ 1.610181] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 1.610229] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.610278] usb usb2: Product: DWC OTG Controller
<6>[ 1.610311] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
<6>[ 1.610350] usb usb2: SerialNumber: usb20_host
<6>[ 1.610796] hub 2-0:1.0: USB hub found
<6>[ 1.610835] hub 2-0:1.0: 1 port detected
<6>[ 1.612567] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 1.612618] android_usb gadget: Number of LUNs=2
<6>[ 1.612653] lun0: LUN: removable file: (no medium)
<6>[ 1.612688] lun1: LUN: removable file: (no medium)
<6>[ 1.612961] android_usb gadget: android_usb ready
<6>[ 1.613397] input: rk29-keypad as /devices/platform/rk29-keypad/input/input1
<6>[ 1.613671] usbcore: registered new interface driver xpad
<6>[ 1.613752] usbcore: registered new interface driver usb_acecad
<6>[ 1.613791] acecad: v3.2:USB Acecad Flair tablet driver
<6>[ 1.613860] usbcore: registered new interface driver aiptek
<6>[ 1.613899] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
<6>[ 1.613950] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
<6>[ 1.614030] usbcore: registered new interface driver gtco
<4>[ 1.614066] GTCO usb driver version: 2.00.0006
<6>[ 1.614129] usbcore: registered new interface driver hanwang
<6>[ 1.614199] usbcore: registered new interface driver kbtab
<6>[ 1.614236] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
<6>[ 1.614321] usbcore: registered new interface driver wacom
<6>[ 1.614358] wacom: v1.52:USB Wacom tablet driver
<6>[ 1.623192] using rtc device, rtc_hym8563, for alarms
<6>[ 1.623253] rtc_hym8563 0-0051: rtc core: registered rtc_hym8563 as rtc0
<6>[ 1.623339] i2c /dev entries driver
<6>[ 1.623918] lirc_dev: IR Remote Control driver registered, major 248
<6>[ 1.623964] IR NEC protocol handler initialized
<6>[ 1.623996] IR RC5(x) protocol handler initialized
<6>[ 1.624029] IR RC6 protocol handler initialized
<6>[ 1.624060] IR JVC protocol handler initialized
<6>[ 1.624090] IR Sony protocol handler initialized
<6>[ 1.624122] IR RC5 (streamzap) protocol handler initialized
<6>[ 1.624159] IR LIRC bridge handler initialized
<6>[ 1.624189] Linux video capture interface: v2.00
<4>[ 1.624794] def_ref_volt: 3300mV, curr_ref_volt: 3250mV
<6>[ 1.625272] device-mapper: uevent: version 1.0.3
<6>[ 1.625587] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>[ 1.625778] Bluetooth: HCI UART driver ver 2.2
<6>[ 1.625814] Bluetooth: HCI H4 protocol initialized
<6>[ 1.625848] Bluetooth: HCILL protocol initialized
<6>[ 1.625923] cpuidle: using governor ladder
<6>[ 1.625953] cpuidle: using governor menu
<6>[ 1.631612] <iomux_gpio_to_mode> gpio(10864), is invalid
<6>[ 1.678790]
<6>[ 1.678795] drivers/mmc/core/core.c...2010.. ===== mmc_rescan Begin....[mmc0]
<4>[ 1.678873]
<4>[ 1.678876] =================
<4>[ 1.678882] sdmmc_rescan..2017.. ====find no SDMMC host. [mmc0]
<6>[ 1.678997] .Line3995..The End of SDMMC-probe Ver.5.05 The last modify date is 2013-05-08. [vmmc]
<6>[ 1.679231]
<6>[ 1.679235] drivers/mmc/core/core.c...2010.. ===== mmc_rescan Begin....[mmc1]
<6>[ 1.679344] .Line3995..The End of SDMMC-probe Ver.5.05 The last modify date is 2013-05-08. [sdio]
<6>[ 1.681140] usbcore: registered new interface driver usbhid
<6>[ 1.681179] usbhid: USB HID core driver
<6>[ 1.681591] logger: created 256K log 'log_main'
<6>[ 1.681713] logger: created 256K log 'log_events'
<6>[ 1.681815] logger: created 256K log 'log_radio'
<6>[ 1.681910] logger: created 256K log 'log_system'
<6>[ 1.682374] ALSA device list:
<6>[ 1.682398] No soundcards found.
<6>[ 1.682535] GACT probability NOT on
<6>[ 1.682566] Mirror/redirect action on
<6>[ 1.682592] u32 classifier
<6>[ 1.682610] Actions configured
<6>[ 1.682635] Netfilter messages via NETLINK v0.30.
<6>[ 1.682714] nf_conntrack version 0.5.0 (7199 buckets, 28796 max)
<6>[ 1.683076] ctnetlink v0.93: registering with nfnetlink.
<6>[ 1.683144] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 1.683187] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 1.683549] xt_time: kernel timezone is -0000
<6>[ 1.683730] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.683915] arp_tables: (C) 2002 David S. Miller
<6>[ 1.683990] TCP cubic registered
<6>[ 1.684013] Initializing XFRM netlink socket
<6>[ 1.684586] NET: Registered protocol family 10
<6>[ 1.685399] Mobile IPv6
<6>[ 1.685451] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 1.685617] IPv6 over IPv4 tunneling driver
<6>[ 1.686450] NET: Registered protocol family 17
<6>[ 1.686518] NET: Registered protocol family 15
<6>[ 1.686781] Bluetooth: RFCOMM TTY layer initialized
<6>[ 1.686823] Bluetooth: RFCOMM socket layer initialized
<6>[ 1.686857] Bluetooth: RFCOMM ver 1.11
<6>[ 1.686885] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 1.686920] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 1.687074] NET: Registered protocol family 35
<6>[ 1.687293] [BT_RFKILL]: Enter rfkill_rk_init
<4>[ 1.687406] pmic set pm_suspend_volt:
<6>[ 1.687587] Registered character driver
<4>[ 1.687614] [RK_EPD]: version 1.02 20141016
<4>[ 1.687928] [rk29_ebc_probe]: ebc_buf start addr is 0x7ff00000.
<4>[ 1.689927] spi_flash_power_on: spi 1.8V power enable
<6>[ 1.691281] rk29_sdmmc_change_clk_div..1962.. newDiv=40, newCLK=300Khz [sdio]
<4>[ 1.691662] spi_flash_power_on: spi 3.3V power enable
<4>[ 1.741303] MX25U4035 flash detected
<4>[ 2.473897] waveform file size: 252729
<4>[ 2.473935] vcom from spi flash: -2870mV
<4>[ 2.474004] Calculate vcom for XD4
<6>[ 2.474032] [tps] tps65185_vcom_set(919): tps65185_vcom_set enter.
<6>[ 2.491711] [tps] tps65185_vcom_set(928): sess->vcom1 = 0x1f sess->vcom2 = 0x1
<6>[ 2.492276] [tps] tps65185_vcom_set(937): PAPYRUS_ADDR_INT_STATUS1 = 0x0
<6>[ 2.551380] [tps] tps65185_vcom_set(937): PAPYRUS_ADDR_INT_STATUS1 = 0x0
<6>[ 2.611433] [tps] tps65185_vcom_set(937): PAPYRUS_ADDR_INT_STATUS1 = 0x1
<6>[ 2.671290] [tps] tps65185_vcom_set(942): sess->vcom1 = 0x1f sess->vcom2 = 0x41
<6>[ 2.711476] [tps] tps65185_vcom_set(949): rev_val = 0x1f
<6>[ 2.711717] [tps] tps65185_vcom_set(952): rev_val = 0x1
<6>[ 2.711788] [tps] tps65185_vcom_set(954): read_vcom_mv = 287
<4>[ 2.711859] Final VCOM = -2870mV
<4>[ 2.711943] turn off blue led
<4>[ 2.711989] turn off green led
<3>[ 2.712039] [slr] pull down the OTG_DRV gpio to keep safe when booting
<4>[ 2.713395] spi_flash_power_on: spi 1.8V power disable
<4>[ 2.715175] spi_flash_power_on: spi 3.3V power disable
<4>[ 2.761241] spi and nand waveform are different
<4>[ 2.761276] waveform is using spi's
<4>[ 2.761309] ---get lut from rk spi sucesss---
<4>[ 2.782086] rk30_adc_battery_get_bat_vol, enter...
<4>[ 2.782134] rk30_adc_battery_get_bat_vol, ---axp_charger->vbat: 4236---
<4>[ 2.782206] rk30_adc_battery_get_bat_vol, enter...
<4>[ 2.782240] rk30_adc_battery_get_bat_vol, ---axp_charger->vbat: 4236---
<4>[ 2.782285] rk30_adc_ebc_battery_check, enter...
<4>[ 2.782316] rk30_adc_battery_get_bat_vol, enter...
<4>[ 2.782348] rk30_adc_battery_get_bat_vol, ---axp_charger->vbat: 4236---
<6>[ 2.784220] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<5>[ 2.784301] Registering SWP/SWPB emulation handler
<4>[ 2.786638] regulator_init_complete: axp22_DCDC5: incomplete constraints, leaving on
<4>[ 2.787556] regulator_init_complete: axp22_DCDC3: incomplete constraints, leaving on
<4>[ 2.788040] regulator_init_complete: axp22_DCDC2: incomplete constraints, leaving on
<4>[ 2.788525] regulator_init_complete: axp22_DCDC1: incomplete constraints, leaving on
<4>[ 2.790727] regulator_init_complete: axp22_dldo4: incomplete constraints, leaving on
<4>[ 2.792119] regulator_init_complete: axp22_aldo3: incomplete constraints, leaving on
<4>[ 2.793034] regulator_init_complete: axp22_aldo1: incomplete constraints, leaving on
<4>[ 2.793521] regulator_init_complete: axp22_rtc: incomplete constraints, leaving on
<3>[ 2.793729] [slr] enter goodix_ts_init <gt9157 start>
<4>[ 2.793766] <<-GTP-INFO->> GTP driver installing...
<4>[ 2.801416] <<-GTP-INFO->> GTP Driver Version: V2.2<2014/01/14>
<4>[ 2.801460] <<-GTP-INFO->> GTP Driver Built@17:36:03, May 26 2016
<4>[ 2.801500] <<-GTP-INFO->> GTP I2C Address: 0x14
<4>[ 2.801532] gt9157_init_platform_hw, enter...
<4>[ 2.804396] tp_power_on: tp power enable
<3>[ 2.861245] [slr] goodix i2c test1
<4>[ 2.861507] <<-GTP-INFO->> Guitar reset
<3>[ 2.991412] [slr] goodix i2c test2
<4>[ 2.992020] <<-GTP-INFO->> IC Version: 9157_1040
<4>[ 2.992461] <<-GTP-INFO->> CTP_CONFIG_GROUP1 used, config length: 186
<4>[ 2.992909] <<-GTP-INFO->> Ic fixed config with config version(91, 0x5B)
<4>[ 2.993456] <<-GTP-INFO->> X_MAX = 758, Y_MAX = 1024, TRIGGER = 0x01
<4>[ 2.993528] <<-GTP-INFO->> create proc entry gt9xx_config success
<6>[ 2.993756] input: goodix-ts as /devices/virtual/input/input2
<4>[ 2.993961] <<-GTP-INFO->> GTP works in interrupt mode.
<4>[ 2.994004] <<-GTP-INFO->> Applied memory size:2562.
<4>[ 2.994038] <<-GTP-INFO->> I2C function: without pre and end cmd!
<4>[ 2.994100] <<-GTP-INFO->> Create proc entry success!
<4>[ 2.994133] <<-GTP-INFO->> Esd started
<3>[ 2.994215] [slr] detect gt9157 so exit mstar driver init
<6>[ 2.994290] sensor_init: Probe name sensors
<4>[ 2.994328] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
<6>[ 2.994954] rtc_hym8563 0-0051: setting system clock to 2016-07-10 19:54:45 UTC (1468180485)
<6>[ 2.995197] Freeing init memory: 160K
<4>[ 3.009085] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<4>[ 3.023505] axp battery hardware current direction 1
<3>[ 3.050989] android_usb: already disabled
<4>[ 3.063427] gp_rknand_info = : 0xdc368000
<4>[ 3.063552] rk30_chip_set:2
<4>[ 3.063642] FtlInit!
<4>[ 3.063682] No.1 FLASH ID:ad de 94 eb 74 44
<4>[ 3.067575] FTL version: 5.0.12 20140214
<4>[ 3.416268] gBootMedia = 1 gSdmmcFwPartOffset =0!
<4>[ 3.416308] rknand_buffer.c version: 4.40 20130830!
<5>[ 3.416591] 11 cmdlinepart partitions found on MTD device rk29xxnand
<5>[ 3.416636] Creating 11 MTD partitions on "rk29xxnand":
<5>[ 3.416677] 0x000000000000-0x000000400000 : "parameter"
<5>[ 3.417732] 0x000000400000-0x000000800000 : "misc"
<5>[ 3.418656] 0x000000800000-0x000001000000 : "kernel"
<5>[ 3.419578] 0x000001000000-0x000002000000 : "boot"
<5>[ 3.420528] 0x000002000000-0x000004000000 : "recovery"
<5>[ 3.421577] 0x000004000000-0x000008000000 : "backup"
<5>[ 3.422621] 0x000008000000-0x000010000000 : "cache"
<5>[ 3.423734] 0x000010000000-0x000050000000 : "userdata"
<5>[ 3.425574] 0x000050000000-0x000050400000 : "kpanic"
<6>[ 3.428307] apanic: Bound to mtd partition 'kpanic'
<6>[ 3.428344] apanic: No panic data available
<5>[ 3.428380] 0x000050400000-0x000070400000 : "system"
<5>[ 3.429824] 0x000070400000-0x0001d4000000 : "user"
<6>[ 8.033000] EXT4-fs (mtdblock6): recovery complete
<6>[ 8.033386] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: discard
<4>[ 8.033802] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
<4>[ 8.035999] IPP init, version rk30-ipp 1.003
<3>[ 8.041640] init: Unable to open persistent property directory /data/property errno: 2
<6>[ 8.053780] adb_open
<6>[ 8.102173] lcdc0 win0 closed,atv layer:0
<6>[ 8.865367] EXT4-fs (mtdblock9): mounted filesystem without journal. Opts: barrier=1,discard
<6>[ 8.963558] EXT4-fs (mtdblock7): mounted filesystem with ordered data mode. Opts:
<6>[ 9.631302] DWC_OTG: dwc_otg_hcd_enable, disable host controller
<4>[ 10.691995] DWC_OTG: dwc_otg_pcd_ep_dequeue, bogus device state, c0b23658, speed 0
<6>[ 10.699720] adb_release
<6>[ 10.699949] adb_open
<3>[ 10.702794] android_usb: already disabled
<6>[ 10.709116] mtp_bind_config
<6>[ 10.717607] mtp_open
<6>[ 17.441243] DWC_OTG: ********vbus detect*********************************************
<6>[ 17.726534] DWC_OTG: ********soft connect!!!*****************************************
<6>[ 17.732539] DWC_OTG: USB SUSPEND
<6>[ 17.828679] DWC_OTG: USB RESET
<6>[ 17.859854] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 17.873911] android_usb gadget: high speed config #1: android
<6>[ 17.874092] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 39.303522] DWC_OTG: USB SUSPEND
<6>[ 43.631976] DWC_OTG: USB RESET
<6>[ 43.710151] DWC_OTG: USB SUSPEND
<6>[ 43.847906] DWC_OTG: USB RESET
<6>[ 43.921136] android_usb gadget: high speed config #1: android
<6>[ 43.921351] mtp_release
<6>[ 43.921548] adb_release
<6>[ 43.921848] android_work: did not send uevent (1 1 (null))
<6>[ 43.937569] adb_open
<6>[ 43.939850] mtp_bind_config
<6>[ 44.441244] DWC_OTG: ********soft reconnect******************************************
<6>[ 44.629494] DWC_OTG: ********soft connect!!!*****************************************
<6>[ 44.635501] DWC_OTG: USB SUSPEND
<6>[ 46.369383] DWC_OTG: USB RESET
<6>[ 46.442582] android_usb gadget: high speed config #1: android
<6>[ 46.442843] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 57.350385] DWC_OTG: USB SUSPEND
<6>[ 59.463441] DWC_OTG: USB RESET
<6>[ 59.641761] DWC_OTG: USB SUSPEND
<6>[ 59.834941] DWC_OTG: USB RESET
<6>[ 59.910446] DWC_OTG: USB RESET
<6>[ 59.995742] android_usb gadget: high speed config #1: android
<6>[ 59.996044] adb_release
<6>[ 59.996335] android_work: did not send uevent (1 1 (null))
<6>[ 59.996996] adb_open
<6>[ 59.997043] mtp_bind_config
<6>[ 60.441246] DWC_OTG: ********soft reconnect******************************************
<6>[ 60.629466] DWC_OTG: ********soft connect!!!*****************************************
<6>[ 60.635473] DWC_OTG: USB SUSPEND
<6>[ 60.958783] DWC_OTG: USB RESET
<6>[ 61.038307] DWC_OTG: USB RESET
<6>[ 61.123494] android_usb gadget: high speed config #1: android
<6>[ 61.123793] android_work: sent uevent USB_STATE=CONFIGURED
Last edited by plus; 07-12-2016 at 04:08 AM.
Reason: seen first post update
|