View Single Post
Old 07-08-2016, 02:35 PM   #9
plus
Member
plus began at the beginning.
 
Posts: 24
Karma: 12
Join Date: Jul 2016
Device: k4nt, T63HD-JD
Hi,

"JDRead shine T63HD-JD" recovery log+dmesg:

/tmp/recovery.log:
Code:
Starting TWRP 2.8.1.0 By Nightboy on Fri Jul  8 18:20:34 2016
I:=> product model: 'rk30sdk'
I:=> using device id: 'rk30sdk'
BOARD_HAS_NO_REAL_SDCARD := true
TW_NO_CPU_TEMP := true
I:Lun file '/sys/devices/virtual/android_usb/android0/f_mass_storage/lun/file'
I:TW_BRIGHTNESS_PATH := /sys/devices/platform/rk29_backlight/backlight/rk28_bl/brightness
I:Found brightness file at '/sys/devices/platform/rk29_backlight/backlight/rk28_bl/brightness'
I:TWFunc::Set_Brightness: Setting brightness control to 255
Starting the UI...ebc_init: vwidth=1024 vheight=758
Pixel format: 1024x758 @ 16bpp
Pixel format: RGB_565
Not using qualcomm overlay, 'fb0'
framebuffer: fd 4 (1024 x 758)
=> Linking mtab
=> Processing recovery.fstab
I:Processing '/kernel'
I:Processing '/misc'
I:Processing '/boot'
I:Processing '/recovery'
I:Processing '/cache'
I:Processing '/system'
I:Processing '/data'
I:Processing '/sdcard'
I:Processing '/external_sd'
I:Created '/and-sec' folder.
I:Creating Android Secure: /sdcard/.android_secure
I:mount '/sdcard/.android_secure' '/and-sec' process ended with RC=0
I:Backup folder set to '/sdcard/TWRP/BACKUPS/rk30sdk'
I:Settings storage is '/sdcard'
Updating partition details...
I:Unmounting main partitions...


Partition Logs:
/kernel | /dev/block/mtdblock2 | Size: 8MB
   Flags: Can_Be_Backed_Up IsPresent 
   Primary_Block_Device: /dev/block/mtdblock2
   Display_Name: Kernel
   Storage_Name: Kernel
   Backup_Path: /kernel
   Backup_Name: kernel
   Backup_Display_Name: Kernel
   Storage_Path: /kernel
   Current_File_System: mtd
   Fstab_File_System: mtd
   MTD_Name: kernel
   Backup_Method: flash_utils

/misc | /dev/block/mtdblock1 | Size: 4MB
   Flags: IsPresent 
   Primary_Block_Device: /dev/block/mtdblock1
   Display_Name: Misc
   Storage_Name: Misc
   Backup_Path: /misc
   Backup_Name: misc
   Backup_Display_Name: Misc
   Storage_Path: /misc
   Current_File_System: mtd
   Fstab_File_System: mtd
   MTD_Name: misc
   Backup_Method: flash_utils

/boot | /dev/block/mtdblock3 | Size: 16MB
   Flags: Can_Be_Backed_Up IsPresent 
   Primary_Block_Device: /dev/block/mtdblock3
   Display_Name: Boot
   Storage_Name: Boot
   Backup_Path: /boot
   Backup_Name: boot
   Backup_Display_Name: Boot
   Storage_Path: /boot
   Current_File_System: mtd
   Fstab_File_System: mtd
   MTD_Name: boot
   Backup_Method: flash_utils

/recovery | /dev/block/mtdblock4 | Size: 32MB
   Flags: Can_Be_Backed_Up IsPresent 
   Primary_Block_Device: /dev/block/mtdblock4
   Display_Name: Recovery
   Storage_Name: Recovery
   Backup_Path: /recovery
   Backup_Name: recovery
   Backup_Display_Name: Recovery
   Storage_Path: /recovery
   Current_File_System: mtd
   Fstab_File_System: mtd
   MTD_Name: recovery
   Backup_Method: flash_utils

/cache | /dev/block/mtdblock6 | Size: 125MB Used: 4MB Free: 121MB Backup Size: 4MB
   Flags: Can_Be_Mounted Can_Be_Wiped Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent 
   Primary_Block_Device: /dev/block/mtdblock6
   Display_Name: Cache
   Storage_Name: Cache
   Backup_Path: /cache
   Backup_Name: cache
   Backup_Display_Name: Cache
   Storage_Path: /cache
   Current_File_System: ext4
   Fstab_File_System: ext4
   Backup_Method: files

/system | /dev/block/mtdblock9 | Size: 511MB Used: 369MB Free: 141MB Backup Size: 369MB
   Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent Ignore_Blkid 
   Primary_Block_Device: /dev/block/mtdblock9
   Display_Name: System
   Storage_Name: System
   Backup_Path: /system
   Backup_Name: system
   Backup_Display_Name: System
   Storage_Path: /system
   Current_File_System: ext4
   Fstab_File_System: ext4
   Backup_Method: files
   Mount_Flags=0x       0, Mount_Options=barrier=1,discard

/data | /dev/block/mtdblock7 | Size: 1007MB Used: 98MB Free: 909MB Backup Size: 98MB
   Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_During_Factory_Reset Wipe_Available_in_GUI IsPresent Can_Encrypt_Backup Use_Userdata_Encryption 
   Primary_Block_Device: /dev/block/mtdblock7
   Display_Name: Data
   Storage_Name: Data
   Backup_Path: /data
   Backup_Name: data
   Backup_Display_Name: Data
   Storage_Path: /data
   Current_File_System: ext4
   Fstab_File_System: ext4
   Backup_Method: files

/sdcard | /dev/block/mtdblock10 | Size: 5686MB Used: 823MB Free: 4863MB Backup Size: 0MB
   Flags: Can_Be_Mounted Can_Be_Wiped Can_Be_Backed_Up Wipe_Available_in_GUI IsPresent Has_Android_Secure Is_Storage Is_Settings_Storage 
   Symlink_Path: /sdcard/.android_secure
   Symlink_Mount_Point: /and-sec
   Primary_Block_Device: /dev/block/mtdblock10
   Display_Name: InternalSDcard
   Storage_Name: InternalSDcard
   Backup_Path: /and-sec
   Backup_Name: and-sec
   Backup_Display_Name: Android Secure
   Storage_Path: /sdcard
   Current_File_System: vfat
   Fstab_File_System: vfat
   Backup_Method: files

/external_sd | /dev/block/mmcblk0p1 | Size: 121703MB Used: 0MB Free: 121703MB Backup Size: 0MB
   Flags: Can_Be_Mounted Can_Be_Wiped Wipe_Available_in_GUI Removable IsPresent Is_Storage 
   Primary_Block_Device: /dev/block/mmcblk0p1
   Alternate_Block_Device: /dev/block/mmcblk0
   Display_Name: MicroSDcard
   Storage_Name: MicroSDcard
   Backup_Path: /external_sd
   Backup_Name: external_sd
   Backup_Display_Name: MicroSDcard
   Storage_Path: /external_sd
   Current_File_System: vfat
   Fstab_File_System: vfat
   Backup_Method: files

I:Loading package: TWRP (/script/ui.xml)
I:Loading package: TWRP (/sdcard/TWRP/theme/ui.zip)
I:Loading package: TWRP (/res/ui.xml)
I:Loading resources...
I:Loading variables...
I:Loading mouse cursor...
I:Loading pages...
I:PageSet::CheckInclude loading filename: ''
I:Loading included resources...
I:Loading included variables...
I:Loading mouse cursor...
I:Loading included pages...
I:Loading page main
I:Loading page main2
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page install
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page flash_confirm
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page flash_zip
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page flash_done
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page clear_vars
I:Loading page confirm_action
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page action_page
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page singleaction_page
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page action_complete
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filecheck
I:Loading page rebootcheck
I:Loading page reboot
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page selectstorage
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page mount
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page usb_mount
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page usb_umount
I:Loading page wipe
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page advancedwipe
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page formatdata
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page formatdata_confirm
I:Loading page checkpartitionlist
I:Loading page partitionoptions
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page refreshfilesystem
I:Loading page selectfilesystem
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page backup
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page backupname1
I:Loading page backupname2
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page backupencryption
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page backupencryption2
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page checkbackuppassword
I:Loading page backup_run
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page restore
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page restore_read
I:Loading page restore_decrypt
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page try_restore_decrypt
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page restore_select
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page renamebackup
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page restore_run
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page settings
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page timezone
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page screen
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page Vibrate
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page advanced
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page partsdcard
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page htcdumlock
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page lock
I:Loading page filemanagerlist
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filemanageroptions
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page choosedestinationfolder
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filemanagerrenamefile
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filemanagerrenamefolder
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filemanagerchmod
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filemanagerconfirm
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page filemanageracction
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page decrypt
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page trydecrypt
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page terminalfolder
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page terminalcommand
I:Loading page sideload
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Loading page installsu
I:Cannot find file /sys/class/thermal/thermal_zone0/temp
I:Set page: 'clear_vars'
I:Set page: 'main2'
I:Switching packages (TWRP)
No SELinux support (no libselinux).
Set boot command "boot-recovery"
Startup Commands: 
ro.boot.console=ttyFIQ0
ro.serialno=
ro.bootmode=unknown
ro.baseband=unknown
ro.bootloader=unknown
ro.hardware=rk30board
ro.revision=0
ro.emmc=0
ro.boot.emmc=0
ro.factorytest=0
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=adb
ro.build.id=JDQ39E
ro.build.display.id=cm_rk3026-eng 4.2.2 JDQ39E 2eee213337 test-keys
ro.build.version.incremental=2eee213337
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Sun Jul  3 09:17:31 CDT 2016
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=user
ro.build.host=user-pc
ro.build.tags=test-keys
ro.product.model=rk30sdk
ro.product.brand=rockchip
ro.product.name=cm_rk3026
ro.product.device=rk3026
ro.product.board=rk30sdk
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Rockchip
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=rk3026
ro.build.product=rk3026
ro.build.description=cm_rk3026-eng 4.2.2 JDQ39E 2eee213337 test-keys
ro.build.fingerprint=rockchip/cm_rk3026/rk3026:4.2.2/JDQ39E/2eee213337:eng/test-keys
ro.build.characteristics=default
ro.cm.device=rk3026
rild.libpath1=/system/lib/libreference-ril-mt6229.so
rild.libpath2=/system/lib/libreference-ril-mu509.so
rild.libpath4=/system/lib/libreference-ril-mw100.so
rild.libpath6=/system/lib/libreference-ril-sc6610.so
rild.libpath7=/system/lib/libreference-ril-m51.so
rild.libpath8=/system/lib/libreference-ril-mt6250.so
rild.libpath9=/system/lib/libreference-ril-c66a.so
rild.libpath10=/system/lib/libreference-ril-sew290.so
rild.libpath11=/system/lib/libreference-ril-u5501.so
rild.libpath12=/system/lib/libreference-ril-u7501.so
rild.libpath14=/system/lib/libreference-ril-a85xx.so
rild.libpath15=/system/lib/libreference-ril-e1230s.so
rild1.libpath=/system/lib/libreference-ril-sc6610-1.so
rild3.libpath=/system/lib/libril-rk29-dataonly.so
rild.libpath13=/system/lib/libreference-ril-aw706.so
ro.boeye.provider=rk
ro.boeye.product=rk3026
ro.boeye.machine=Boyue-T62C
ro.boeye.order=China-T62C
ro.boeye.version=Boyue-Ereader_V1.0.0-2014112017
ro.boeye.customer=Boyue
net.hostname=Boyue_T62C
net.change=net.bt.name
UserVolumeLabel=boyue
ro.boeye.shortstandby=1
persist.service.adb.enable=1
persist.adb.notify=0
ro.kernel.android.checkjni=1
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.linkMTD=stopped
init.svc.recovery=running
init.svc.adbd=running
service.adb.root=1
twrp.crash_counter=0
ro.twrp.boot=1
ro.twrp.version=2.8.1.0 By Nightboy
sys.usb.config=adb

I:Copying file /cache/recovery/log to /cache/recovery/last_log
Set boot command ""
I:Attempt to load settings from settings file...
I:Loading settings from '/sdcard/TWRP/.twrps'.
I:Backup folder set to '/sdcard/TWRP/BACKUPS/rk30sdk'
I:Copying file /etc/recovery.fstab to /cache/recovery/recovery.fstab
I:Version number saved to '/cache/recovery/.version'
I:TWFunc::Set_Brightness: Setting brightness control to 255
I:Enabling MTP during startup
I:Starting MTP
twrp addStorage /sdcard, mtpstorageid: 65537
twrp addStorage /external_sd, mtpstorageid: 65538
Starting MTP
created new mtpserver object
adding internal storage
MtpStorage id: 65537 path: /sdcard
E:inotify_add_watch failed: Invalid argument
MtpStorage id: 65538 path: /external_sd
MTP Enabled
I:Switching packages (TWRP)
I:Skipping screen timeout threads: TW_NO_SCREEN_TIMEOUT is set
I:Starting command line thread
MtpServer::run fd: 14
recovery dmesg stdout:
Code:
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.0.36+ (builder@boyue) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #3 SMP PREEMPT Thu Jan 14 14:34:16 HKT 2016
<4>[    0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: RK30board
<6>[    0.000000] memory reserve: Memory(base:0x7ff00000 size:1M) reserved for <ebc waveform buf>
<6>[    0.000000] memory reserve: Memory(base:0x7f600000 size:9M) reserved for <fb0 buf>
<6>[    0.000000] memory reserve: Memory(base:0x7e200000 size:20M) reserved for <ion>
<6>[    0.000000] memory reserve: Total reserved 30M
<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
<6>[    0.000000] bootconsole [earlycon0] enabled
<4>[    0.000000] CPU SRAM: copied sram code from c0b4d000 to fef00010 - fef01ae8
<4>[    0.000000] CPU SRAM: copied sram data from c0b4ead8 to fef01ae8 - fef01cd0
<4>[    0.000000] rk2928_clock_data_init version:	2013-7-17
<6>[    0.000000] rk3026 soc version:4
<6>[    0.000000] L310 cache controller enabled
<6>[    0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c9, AUX_CTRL 0x76030001, Cache size: 262144 B
<4>[    0.000000] DDR DEBUG: version 1.01 20140303 
<4>[    0.000000] DDR DEBUG: 1 CS, ROW=15, Bank=8, COL=10, Total Capability=512MB
<4>[    0.000000] DDR DEBUG: init success!!! freq=300MHz
<4>[    0.000000] DDR DEBUG: left channel:Dllsel=0, Ophsel=1, Cycsel=1
<4>[    0.000000] DDR DEBUG: right channel:Dllsel=0, Ophsel=1, Cycsel=1
<4>[    0.000000] DDR DEBUG: DRV Pull-Up=0x6, DRV Pull-Dwn=0x7
<4>[    0.000000] DDR DEBUG: ODT Pull-Up=0x0, ODT Pull-Dwn=0x0
<4>[    0.000000] Boot mode: RECOVERY (2) flag: RECOVER (0xc3524203)
<7>[    0.000000] On node 0 totalpages: 123392
<7>[    0.000000] free_area_init_node: node 0, pgdat c0b4a8e0, node_mem_map c0000000
<7>[    0.000000]   Normal zone: 976 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 122416 pages, LIFO batch:31
<4>[    0.000000]   HighMem zone: 48 pages exceeds realsize 0
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @c167a000 s6976 r8192 d13504 u32768
<7>[    0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 122416
<5>[    0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 waveform_addr=0x7ff00000 init=/init initrd=0x62000000,0x00370000 mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00040000@0x00040000(cache),0x00200000@0x00080000(userdata),0x00002000@0x00280000(kpanic),0x00100000@0x00282000(system),-@0x00382000(user) bootver=2016-04-12#2.32 firmware_ver=4.2.2
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 482MB = 482MB total
<5>[    0.000000] Memory: 466556k/466556k available, 57732k reserved, 0K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     DMA     : 0xff600000 - 0xffe00000   (   8 MB)
<5>[    0.000000]     vmalloc : 0xdf000000 - 0xfe800000   ( 504 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xde800000   ( 488 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .init : 0xc0408000 - 0xc0431000   ( 164 kB)
<5>[    0.000000]       .text : 0xc0431000 - 0xc0a34370   (6157 kB)
<5>[    0.000000]       .data : 0xc0a36000 - 0xc0b4c6e8   (1114 kB)
<5>[    0.000000]        .bss : 0xc0b4f024 - 0xc1678ad8   (11431 kB)
<6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:320
<4>[    0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
<6>[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<4>[    0.000000] rk_timer: version 1.3
<6>[    0.003805] Calibrating delay loop (skipped) preset value.. 1199.60 BogoMIPS (lpj=5998045)
<6>[    0.012994] pid_max: default: 32768 minimum: 301
<6>[    0.018433] Mount-cache hash table entries: 512
<6>[    0.024275] Initializing cgroup subsys debug
<6>[    0.029060] Initializing cgroup subsys cpuacct
<6>[    0.034104] Initializing cgroup subsys freezer
<6>[    0.039103] CPU: Testing write buffer coherency: ok
<4>[    0.142501] CPU1: Booted secondary processor
<6>[    0.142560] Brought up 2 CPUs
<6>[    0.150682] SMP: Total of 2 processors activated (2399.21 BogoMIPS).
<6>[    0.158229] devtmpfs: initialized
<6>[    0.168768] NET: Registered protocol family 16
<6>[    0.173901] last_log: 0xddd00000 map to 0xdf004000 and copy to 0xc0b504a0 (version 2.1)
<4>[    0.198870] DVFS MSG:	AVS Value(index=0): 235 232 234 234 234 232 234 234 234 232 
<6>[    0.218980] lcdc0 is used as primary display device contoller!
<6>[    0.225529] warning:lcdc1 not add to system!
<6>[    0.330611] rk29sdk_wifi_bt_gpio_control_init: init finished
<6>[    0.338394] console [ttyFIQ0] enabled, bootconsole disabled
<6>[    0.347580] Registered FIQ tty driver ddc89c00
<6>[    0.348205] Loaded driver for PL330 DMAC--1 rk29-pl330
<6>[    0.348256] 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-14 Num_Events-16
<6>[    0.369194] rk29xx_spim: driver initialized, fifo_len=32,bus_num=0
<6>[    0.384740] bio: create slab <bio-0> at 0
<5>[    0.389529] SCSI subsystem initialized
<6>[    0.389799] usbcore: registered new interface driver usbfs
<6>[    0.389937] usbcore: registered new interface driver hub
<6>[    0.404136] usbcore: registered new device driver usb
<6>[    0.404621] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
<6>[    0.404931] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
<6>[    0.405152] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
<6>[    0.405308] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
<6>[    0.441109] rk30-adc rk30-adc: rk30 adc: driver initialized
<6>[    0.449391] axp_mfd 0-0034: AXP (CHIP ID: 0x06) detected
<6>[    0.473191] input: axp22-supplyer as /devices/platform/rk30_i2c.0/i2c-0/0-0034/axp22-supplyer.20/input/input0
<4>[    0.473278] axp charger not limit now
<4>[    0.476035] drivers/power/axp_power/axp22-sply.c:init green led gpio, turn off green led 
<4>[    0.478323] axp battery hardware current direction 1
<3>[    0.492451] [slr]N_VBUSEN io on axp is set to output
<4>[    0.498178] now_rest_vol = 100
<4>[    0.500159] rk30_adc_ebc_battery_check, enter...
<4>[    0.500198] rk30_adc_battery_get_bat_vol, enter...
<4>[    0.500239] rk30_adc_battery_get_bat_vol, ---axp_charger->vbat: 4202---
<6>[    0.500649] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    0.501233] Bluetooth: Core ver 2.16
<6>[    0.501323] NET: Registered protocol family 31
<6>[    0.501364] Bluetooth: HCI device and connection manager initialized
<6>[    0.501418] Bluetooth: HCI socket layer initialized
<6>[    0.501460] Bluetooth: L2CAP socket layer initialized
<6>[    0.501519] Bluetooth: SCO socket layer initialized
<4>[    0.560303] axp battery hardware current direction 1
<6>[    0.560533] cfg80211: Calling CRDA to update world regulatory domain
<4>[    0.560815] rk fb probe ok!
<6>[    0.560946] Switching to clocksource rk_timer
<6>[    0.561825] Switched to NOHz mode on CPU #0
<6>[    0.562571] Switched to NOHz mode on CPU #1
<4>[    0.569974] lcdc0:reg_phy_base = 0x1010e000,reg_vir_base:0xdf0a4000
<4>[    0.570074] fb0:win0
<4>[    0.570080] fb1:win1
<4>[    0.570086] fb2:win2
<4>[    0.592379] fb0:phy:7f600000>>vir:e0000000>>len:0x900000
<4>[    0.592713] rk_fb_register>>>>>fb0
<4>[    0.593056] rk_fb_register>>>>>fb1
<4>[    0.593091] rk3188 lcdc0 probe ok!
<6>[    0.593326] [tps] tps65185_probe(772): I2C addr:68
<6>[    0.771214] papyrus: detected device with ID=65 (TPS65185r1p2)
<6>[    0.771542] [tps] tps65185_probe(788): tps65185_probe ok.
<4>[    0.771650] i2c-core: driver [tps65185] using legacy suspend method
<4>[    0.771701] i2c-core: driver [tps65185] using legacy resume method
<3>[    0.772986] emmc emmc: internal_storage is NOT emmc
<6>[    0.773272] NET: Registered protocol family 2
<6>[    0.773459] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.773846] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    0.774230] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
<6>[    0.774641] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    0.774694] TCP reno registered
<6>[    0.774729] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.774796] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    0.775219] NET: Registered protocol family 1
<4>[    0.775458] RK29 Backlight Driver Initialized.
<6>[    0.775753] Unpacking initramfs...
<6>[    1.047181] Freeing initrd memory: 3520K
<6>[    1.047441] PMU: registered new PMU device of type 0
<4>[    1.049372] rk3026 cpufreq version 2.2, suspend freq 504 MHz
<4>[    1.050304] highmem bounce pool size: 64 pages
<6>[    1.050537] ashmem: initialized
<6>[    1.057549] fuse init (API version 7.16)
<6>[    1.059646] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
<6>[    1.059714] io scheduler noop registered
<6>[    1.059749] io scheduler deadline registered
<6>[    1.059856] io scheduler cfq registered (default)
<6>[    1.069318] rga: Driver loaded succesfully
<4>[    1.069572] rk_serial.c v1.4 2013-04-16
<6>[    1.069693] rk_serial.0: ttyS0 at MMIO 0x20060000 (irq = 52) is a rk29_serial.0
<6>[    1.069888] rk_serial rk_serial.0: membase 0xdf0a2000
<6>[    1.070241] Rockchip ion module(version: 1.0) is successfully loaded
<6>[    1.072925] loop: module loaded
<6>[    1.072999] Android kernel panic handler initialized (bind=kpanic)
<4>[    1.073046] i2c-test initialization.
<6>[    1.073971] PPP generic driver version 2.4.2
<6>[    1.074193] PPP Deflate Compression module registered
<6>[    1.074235] PPP BSD Compression module registered
<6>[    1.092482] PPP MPPE Compression module registered
<6>[    1.092529] NET: Registered protocol family 24
<6>[    1.092652] usbcore: registered new interface driver asix
<6>[    1.092730] usbcore: registered new interface driver cdc_ether
<6>[    1.092806] usbcore: registered new interface driver dm9620
<6>[    1.092880] usbcore: registered new interface driver SR9700_android
<6>[    1.092957] usbcore: registered new interface driver net1080
<6>[    1.093031] usbcore: registered new interface driver cdc_subset
<6>[    1.093104] usbcore: registered new interface driver zaurus
<6>[    1.093158] cdc_ncm: 04-Aug-2011
<6>[    1.093217] usbcore: registered new interface driver cdc_ncm
<4>[    1.093260] Rockchip WiFi SYS interface (V1.00) ... 
<6>[    1.093341] Initializing USB Mass Storage driver...
<6>[    1.093424] usbcore: registered new interface driver usb-storage
<6>[    1.093469] USB Mass Storage support registered.
<6>[    1.093630] usbcore: registered new interface driver usbserial
<6>[    1.093705] USB Serial support registered for generic
<6>[    1.093792] usbcore: registered new interface driver usbserial_generic
<6>[    1.093841] usbserial: USB Serial Driver core
<6>[    1.093904] USB Serial support registered for GSM modem (1-port)
<6>[    1.093988] usbcore: registered new interface driver option
<6>[    1.094030] option: v0.7.2:USB Driver for GSM modems
<4>[    1.094142] ~~~~~~~~~~usb20otg_soft_reset
<6>[    1.307440] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
<6>[    1.307501] usb20_otg usb20_otg: DWC OTG Controller
<6>[    1.307669] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
<6>[    1.307758] usb20_otg usb20_otg: irq 42, io mem 0x00000000
<6>[    1.307801] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
<6>[    1.307905] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    1.307960] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    1.308015] usb usb1: Product: DWC OTG Controller
<6>[    1.308052] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
<6>[    1.308096] usb usb1: SerialNumber: usb20_otg
<6>[    1.308598] hub 1-0:1.0: USB hub found
<6>[    1.308640] hub 1-0:1.0: 1 port detected
<6>[    1.309474] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xdf180000
<6>[    1.520200] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[    1.520258] usb20_host usb20_host: DWC OTG Controller
<6>[    1.520344] usb20_host usb20_host: new USB bus registered, assigned bus number 2
<6>[    1.520433] usb20_host usb20_host: irq 43, io mem 0x00000000
<6>[    1.520517] DWC_OTG: Init: Port Power? op_state=1
<6>[    1.520554] DWC_OTG: Init: Power Port (0)
<6>[    1.520633] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    1.520688] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    1.520742] usb usb2: Product: DWC OTG Controller
<6>[    1.520779] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
<6>[    1.520823] usb usb2: SerialNumber: usb20_host
<6>[    1.521386] hub 2-0:1.0: USB hub found
<6>[    1.521429] hub 2-0:1.0: 1 port detected
<6>[    1.523223] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[    1.523280] android_usb gadget: Number of LUNs=2
<6>[    1.523319]  lun0: LUN: removable file: (no medium)
<6>[    1.523358]  lun1: LUN: removable file: (no medium)
<6>[    1.523627] android_usb gadget: android_usb ready
<4>[    1.523874] drivers/input/keyboard/rk29_keys.c: init blue led gpio, turn off blue led 
<6>[    1.524150] input: rk29-keypad as /devices/platform/rk29-keypad/input/input1
<6>[    1.524474] usbcore: registered new interface driver xpad
<6>[    1.524563] usbcore: registered new interface driver usb_acecad
<6>[    1.524608] acecad: v3.2:USB Acecad Flair tablet driver
<6>[    1.524684] usbcore: registered new interface driver aiptek
<6>[    1.524727] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
<6>[    1.524784] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
<6>[    1.524873] usbcore: registered new interface driver gtco
<4>[    1.524915] GTCO usb driver version: 2.00.0006
<6>[    1.524983] usbcore: registered new interface driver hanwang
<6>[    1.525060] usbcore: registered new interface driver kbtab
<6>[    1.525101] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
<6>[    1.525184] usbcore: registered new interface driver wacom
<6>[    1.525225] wacom: v1.52:USB Wacom tablet driver
<6>[    1.543008] using rtc device, rtc_hym8563, for alarms
<6>[    1.543080] rtc_hym8563 0-0051: rtc core: registered rtc_hym8563 as rtc0
<6>[    1.543174] i2c /dev entries driver
<6>[    1.543791] lirc_dev: IR Remote Control driver registered, major 248 
<6>[    1.543843] IR NEC protocol handler initialized
<6>[    1.543878] IR RC5(x) protocol handler initialized
<6>[    1.543915] IR RC6 protocol handler initialized
<6>[    1.543951] IR JVC protocol handler initialized
<6>[    1.543986] IR Sony protocol handler initialized
<6>[    1.544022] IR RC5 (streamzap) protocol handler initialized
<6>[    1.544064] IR LIRC bridge handler initialized
<6>[    1.544099] Linux video capture interface: v2.00
<4>[    1.544707] def_ref_volt: 3300mV, curr_ref_volt: 3216mV
<6>[    1.545216] device-mapper: uevent: version 1.0.3
<6>[    1.545548] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>[    1.545755] Bluetooth: HCI UART driver ver 2.2
<6>[    1.545795] Bluetooth: HCI H4 protocol initialized
<6>[    1.545833] Bluetooth: HCILL protocol initialized
<6>[    1.545919] cpuidle: using governor ladder
<6>[    1.545953] cpuidle: using governor menu
<6>[    1.551655] <iomux_gpio_to_mode> gpio(10864), is invalid
<6>[    1.598772] 
<6>[    1.598776] drivers/mmc/core/core.c...2010..  ===== mmc_rescan Begin....[mmc0]
<6>[    1.598946] .Line3995..The End of SDMMC-probe Ver.5.05 The last modify date is 2013-05-08.  [vmmc]
<6>[    1.599285] .Line3995..The End of SDMMC-probe Ver.5.05 The last modify date is 2013-05-08.  [sdio]
<6>[    1.605294] rk29_sdmmc_change_clk_div..1962..  newDiv=80, newCLK=300Khz [vmmc]
<6>[    1.606714] usbcore: registered new interface driver usbhid
<6>[    1.606759] usbhid: USB HID core driver
<6>[    1.607223] logger: created 256K log 'log_main'
<6>[    1.607344] logger: created 256K log 'log_events'
<6>[    1.607484] logger: created 256K log 'log_radio'
<6>[    1.607596] logger: created 256K log 'log_system'
<6>[    1.608154] ALSA device list:
<6>[    1.608183]   No soundcards found.
<6>[    1.608332] GACT probability NOT on
<6>[    1.608368] Mirror/redirect action on
<6>[    1.608399] u32 classifier
<6>[    1.608422]     Actions configured
<6>[    1.608452] Netfilter messages via NETLINK v0.30.
<6>[    1.608544] nf_conntrack version 0.5.0 (7344 buckets, 29376 max)
<6>[    1.608982] ctnetlink v0.93: registering with nfnetlink.
<6>[    1.609062] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    1.609115] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    1.609555] xt_time: kernel timezone is -0000
<6>[    1.609765] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    1.609982] arp_tables: (C) 2002 David S. Miller
<6>[    1.610071] TCP cubic registered
<6>[    1.610098] Initializing XFRM netlink socket
<6>[    1.610761] NET: Registered protocol family 10
<6>[    1.611874] Mobile IPv6
<6>[    1.611937] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    1.612128] IPv6 over IPv4 tunneling driver
<6>[    1.613097] NET: Registered protocol family 17
<6>[    1.613173] NET: Registered protocol family 15
<6>[    1.613479] Bluetooth: RFCOMM TTY layer initialized
<6>[    1.613530] Bluetooth: RFCOMM socket layer initialized
<6>[    1.613571] Bluetooth: RFCOMM ver 1.11
<6>[    1.613602] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    1.613644] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    1.613848] NET: Registered protocol family 35
<6>[    1.614103] [BT_RFKILL]: Enter rfkill_rk_init
<4>[    1.614238] pmic set pm_suspend_volt:
<6>[    1.614459] Registered character driver
<4>[    1.614493] [RK_EPD]: version 1.02 20141016 
<4>[    1.616866] [rk29_ebc_probe]: ebc_buf start addr is 0x7ff00000.
<4>[    1.618897] spi_flash_power_on: spi 1.8V power enable
<4>[    1.620542] spi_flash_power_on: spi 3.3V power enable
<6>[    1.645427] 
<6>[    1.645432] mmc_attach_sd..1219..  ===== Begin to identify card as SD-card. [mmc0]
<4>[    1.661179] MX25U4035 flash detected
<6>[    1.699002] rk29_sdmmc_change_clk_div..1962..  newDiv=0, newCLK=48000Khz [vmmc]
<6>[    1.699226] mmc0: new high speed SDXC card at address aaaa
<6>[    2.050160] mmcblk0: mmc0:aaaa SL128 119 GiB 
<6>[    2.060577] 
<6>[    2.060583] msdos_partition..461... ==== Begin to parse sdcard-partition.  [mmc0]
<6>[    2.069621] msdos_partition..530... ==== The sdcard has MBR. [mmc0]
<6>[    2.075939] msdos_partition..543... ==== partition-1, size=124867584KB  [mmc0]
<6>[    2.083212] msdos_partition..571... ==== main partition-1....[mmc0]
<6>[    2.089525]  mmcblk0: p1
<6>[    2.092557] sdmmc_rescan_try_freq..1904..  ===== Initialize SD-card successfully. [mmc0]
<6>[    2.100735] 
<6>[    2.100739] drivers/mmc/core/core.c...2010..  ===== mmc_rescan Begin....[mmc1]
<6>[    2.121059] rk29_sdmmc_change_clk_div..1962..  newDiv=40, newCLK=300Khz [sdio]
<4>[    2.402168] waveform file size: 252729
<4>[    2.402208] vcom from spi flash: -2870mV
<4>[    2.402293] Calculate vcom for XD4
<6>[    2.402324] [tps] tps65185_vcom_set(919): tps65185_vcom_set enter.
<6>[    2.421559] [tps] tps65185_vcom_set(928): sess->vcom1 = 0x1f sess->vcom2 = 0x1
<6>[    2.422082] [tps] tps65185_vcom_set(937): PAPYRUS_ADDR_INT_STATUS1 = 0x0
<6>[    2.481258] [tps] tps65185_vcom_set(937): PAPYRUS_ADDR_INT_STATUS1 = 0x1
<6>[    2.541096] [tps] tps65185_vcom_set(942): sess->vcom1 = 0x1f sess->vcom2 = 0x41
<6>[    2.581257] [tps] tps65185_vcom_set(949): rev_val = 0x1f
<6>[    2.581505] [tps] tps65185_vcom_set(952): rev_val = 0x1
<6>[    2.581575] [tps] tps65185_vcom_set(954): read_vcom_mv = 287
<4>[    2.581647] Final VCOM = -2870mV
<4>[    2.583003] spi_flash_power_on: spi 1.8V power disable
<4>[    2.584816] spi_flash_power_on: spi 3.3V power disable
<4>[    2.631042] spi and nand waveform are different
<4>[    2.631081] waveform is using spi's
<4>[    2.631117] ---get lut from rk spi sucesss---
<6>[    2.646661] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<5>[    2.646774] Registering SWP/SWPB emulation handler
<6>[    2.647326] ddrfreq: verion 3.2 20130917
<6>[    2.647362] ddrfreq: fix cpu pause bug
<6>[    2.647397] ddrfreq: normal 396MHz video 300MHz video_low 0MHz dualview 0MHz idle 0MHz suspend 198MHz reboot 300MHz
<4>[    2.648004] enter gpio_init
<4>[    2.648037] drivers/gpio_init/gpio_init.c:init blue led gpio, turn off blue led 
<4>[    2.648101] drivers/gpio_init/gpio_init.c:init green led gpio, turn off green led 
<6>[    2.648676] ddrfreq: change freq to 396 MHz when normal
<3>[    2.648746] [slr] pull down the OTG_DRV gpio to keep safe when booting
<4>[    2.650545] regulator_init_complete: axp22_DCDC5: incomplete constraints, leaving on
<4>[    2.651516] regulator_init_complete: axp22_DCDC3: incomplete constraints, leaving on
<4>[    2.652001] regulator_init_complete: axp22_DCDC2: incomplete constraints, leaving on
<4>[    2.652489] regulator_init_complete: axp22_DCDC1: incomplete constraints, leaving on
<4>[    2.654284] regulator_init_complete: axp22_dldo4: incomplete constraints, leaving on
<4>[    2.655645] regulator_init_complete: axp22_aldo3: incomplete constraints, leaving on
<4>[    2.656565] regulator_init_complete: axp22_aldo1: incomplete constraints, leaving on
<4>[    2.657051] regulator_init_complete: axp22_rtc: incomplete constraints, leaving on
<3>[    2.657290] [slr] enter goodix_ts_init <gt9157 start>
<4>[    2.657325] <<-GTP-INFO->> GTP driver installing...
<4>[    2.701284] <<-GTP-INFO->> GTP Driver Version: V2.2<2014/01/14>
<4>[    2.701329] <<-GTP-INFO->> GTP Driver Built@10:42:08, Dec  3 2015
<4>[    2.701369] <<-GTP-INFO->> GTP I2C Address: 0x14
<4>[    2.701402] gt9157_init_platform_hw, enter...
<4>[    2.701457] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[    2.701513] --> lut_mode = 0
<4>[    2.701576] --> lut_temp = 8
<4>[    2.701599] --> waveformoffset = 0x5f
<4>[    2.701626] 7f, 0, 0, 7f
<4>[    2.703017] --> lut_temp = 109
<4>[    2.703724] tp_power_on: tp power enable
<3>[    2.761033] [slr] goodix i2c test1
<4>[    2.761284] <<-GTP-INFO->> Guitar reset
<3>[    2.891220] [slr] goodix i2c test2
<4>[    2.891929] <<-GTP-INFO->> IC Version: 9157_1040
<4>[    2.892522] <<-GTP-INFO->> CTP_CONFIG_GROUP1 used, config length: 186
<4>[    2.893071] <<-GTP-INFO->> Ic fixed config with config version(91, 0x5B)
<4>[    2.893722] <<-GTP-INFO->> X_MAX = 758, Y_MAX = 1024, TRIGGER = 0x01
<4>[    2.893855] <<-GTP-INFO->> create proc entry gt9xx_config success
<6>[    2.894396] input: goodix-ts as /devices/virtual/input/input2
<4>[    2.894784] <<-GTP-INFO->> GTP works in interrupt mode.
<4>[    2.894870] <<-GTP-INFO->> Applied memory size:2562.
<4>[    2.894941] <<-GTP-INFO->> I2C function: without pre and end cmd!
<4>[    2.895058] <<-GTP-INFO->> Create proc entry success!
<4>[    2.895122] <<-GTP-INFO->> Esd started
<3>[    2.895283] [slr] enter cyttsp4_i2c_init <cyttsp4 start>
<3>[    2.895351] [slr] detect gt9157 so exit cyttsp4_i2c_init
<3>[    2.895416] [slr] enter cyttsp4_loader_init
<3>[    2.895470] [slr] detect gt9157 so exit cyttsp4_loader_init
<3>[    2.895539] [slr] enter cyttsp4_device_access_init
<3>[    2.895598] [slr] detect gt9157 so exit cyttsp4_device_access_init
<6>[    2.895775] sensor_init: Probe name sensors
<4>[    2.895847] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
<6>[    2.896587] rtc_hym8563 0-0051: setting system clock to 2016-07-08 18:20:29 UTC (1468002029)
<6>[    2.897122] Freeing init memory: 164K
<4>[    2.915641] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<4>[    2.933920] axp battery hardware current direction 1
<3>[    2.957518] android_usb: already disabled
<4>[    2.969731] gp_rknand_info = : 0xdde02f00
<4>[    2.969848] rk30_chip_set:2 
<4>[    2.969939] FtlInit!
<4>[    2.969981] No.1 FLASH ID:ad de 94 eb 74 44
<4>[    2.973939] FTL version: 5.0.12 20140214
<4>[    3.317746] gBootMedia = 1 gSdmmcFwPartOffset =0!
<4>[    3.317787] rknand_buffer.c version: 4.40 20130830!
<5>[    3.318088] 11 cmdlinepart partitions found on MTD device rk29xxnand
<5>[    3.318133] Creating 11 MTD partitions on "rk29xxnand":
<5>[    3.318171] 0x000000000000-0x000000400000 : "parameter"
<5>[    3.319188] 0x000000400000-0x000000800000 : "misc"
<5>[    3.320115] 0x000000800000-0x000001000000 : "kernel"
<5>[    3.321307] 0x000001000000-0x000002000000 : "boot"
<5>[    3.322245] 0x000002000000-0x000004000000 : "recovery"
<5>[    3.323246] 0x000004000000-0x000008000000 : "backup"
<5>[    3.324264] 0x000008000000-0x000010000000 : "cache"
<5>[    3.325283] 0x000010000000-0x000050000000 : "userdata"
<5>[    3.327217] 0x000050000000-0x000050400000 : "kpanic"
<6>[    3.329974] apanic: Bound to mtd partition 'kpanic'
<6>[    3.330011] apanic: No panic data available
<5>[    3.330048] 0x000050400000-0x000070400000 : "system"
<5>[    3.331550] 0x000070400000-0x0001d4000000 : "user"
<4>[    4.001288] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[    4.001398] --> lut_mode = 1
<4>[    4.001444] --> lut_temp = 8
<4>[    4.001487] --> waveformoffset = 0x63
<4>[    4.001538] ef, 0, 0, ef
<4>[    4.002409] --> lut_temp = 23
<4>[    4.661266] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[    4.661375] --> lut_mode = 1
<4>[    4.661419] --> lut_temp = 8
<4>[    4.661468] --> waveformoffset = 0x63
<4>[    4.661519] ef, 0, 0, ef
<4>[    4.662389] --> lut_temp = 23
<4>[    5.161290] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[    5.161399] --> lut_mode = 1
<4>[    5.161443] --> lut_temp = 8
<4>[    5.161493] --> waveformoffset = 0x63
<4>[    5.161543] ef, 0, 0, ef
<4>[    5.162407] --> lut_temp = 23
<4>[    5.661277] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[    5.661387] --> lut_mode = 1
<4>[    5.661432] --> lut_temp = 8
<4>[    5.661480] --> waveformoffset = 0x63
<4>[    5.661530] ef, 0, 0, ef
<4>[    5.662395] --> lut_temp = 23
<4>[    6.161284] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[    6.161393] --> lut_mode = 1
<4>[    6.161439] --> lut_temp = 8
<4>[    6.161487] --> waveformoffset = 0x63
<4>[    6.161537] ef, 0, 0, ef
<4>[    6.162403] --> lut_temp = 23
<4>[    6.661282] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[    6.661390] --> lut_mode = 1
<4>[    6.661436] --> lut_temp = 8
<4>[    6.661485] --> waveformoffset = 0x63
<4>[    6.661535] ef, 0, 0, ef
<4>[    6.662403] --> lut_temp = 23
<4>[    7.161284] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[    7.161393] --> lut_mode = 1
<4>[    7.161438] --> lut_temp = 8
<4>[    7.161487] --> waveformoffset = 0x63
<4>[    7.161538] ef, 0, 0, ef
<4>[    7.162402] --> lut_temp = 23
<4>[    7.661293] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[    7.661401] --> lut_mode = 1
<4>[    7.661447] --> lut_temp = 8
<4>[    7.661495] --> waveformoffset = 0x63
<4>[    7.661545] ef, 0, 0, ef
<4>[    7.662412] --> lut_temp = 23
<6>[    8.037741] EXT4-fs (mtdblock6): recovery complete
<6>[    8.038119] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: discard
<4>[    8.038537] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
<4>[    8.040790] IPP init, version rk30-ipp 1.003
<3>[    8.065929] init: Unable to open persistent property directory /data/property errno: 2
<3>[    8.080580] init: untracked pid 85 exited
<6>[    8.084804] adb_open
<4>[    8.161293] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[    8.161384] --> lut_mode = 1
<4>[    8.161417] --> lut_temp = 8
<4>[    8.161440] --> waveformoffset = 0x63
<4>[    8.161466] ef, 0, 0, ef
<4>[    8.161998] --> lut_temp = 23
<6>[    8.301895] lcdc0 win0 closed,atv layer:0
<4>[    8.461385] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[    8.461449] --> lut_mode = 1
<4>[    8.461499] --> lut_temp = 8
<4>[    8.461522] --> waveformoffset = 0x63
<4>[    8.461549] ef, 0, 0, ef
<4>[    8.462319] --> lut_temp = 23
<6>[    8.693188] EXT4-fs (mtdblock9): mounted filesystem without journal. Opts: barrier=1,discard
<4>[    8.751953] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[    8.752701] --> lut_mode = 2
<4>[    8.752748] --> lut_temp = 8
<4>[    8.752791] --> waveformoffset = 0x67
<4>[    8.752842] 5f, 1, 0, 60
<4>[    8.754172] --> lut_temp = 40
<6>[    9.075902] EXT4-fs (mtdblock7): recovery complete
<6>[    9.080962] EXT4-fs (mtdblock7): mounted filesystem with ordered data mode. Opts: 
<6>[    9.552504] DWC_OTG: dwc_otg_hcd_enable, disable host controller
<3>[   10.526521] [slr] axp_charging_monitor,1477
<3>[   10.526693] [slr] the battery volumn > 90% so turn on green LED
<4>[   10.530321] axp battery hardware current direction 0
<6>[   17.361091] DWC_OTG: ********vbus detect*********************************************
<6>[   17.634189] DWC_OTG: ********soft connect!!!*****************************************
<6>[   17.640191] DWC_OTG: USB SUSPEND
<6>[   17.924242] DWC_OTG: USB RESET
<6>[   17.996316] android_work: sent uevent USB_STATE=CONNECTED
<6>[   18.000369] DWC_OTG: USB RESET
<6>[   18.085215] android_usb gadget: high speed config #1: android
<6>[   18.085375] android_work: sent uevent USB_STATE=CONFIGURED
<6>[   20.326267] adb_release
<3>[   20.329598] android_usb: already disabled
<6>[   20.340285] adb_open
<6>[   20.361093] DWC_OTG: ********soft reconnect******************************************
<3>[   20.544590] [slr] axp_charging_monitor,1477
<6>[   20.591215] DWC_OTG: ********soft connect!!!*****************************************
<6>[   20.597223] DWC_OTG: USB SUSPEND
<6>[   20.740070] DWC_OTG: USB RESET
<6>[   20.815583] DWC_OTG: USB RESET
<6>[   20.900912] android_usb gadget: high speed config #1: android
<6>[   20.901139] android_work: sent uevent USB_STATE=CONFIGURED
<3>[   30.564889] [slr] axp_charging_monitor,1477
<4>[   30.566464] axp battery hardware current direction 1
<6>[   31.759211] adb_release
<3>[   31.767487] android_usb: already disabled
<6>[   31.774015] adb_open
<6>[   31.774066] mtp_bind_config
<6>[   31.782956] mtp_open
<4>[   31.981336] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   31.981397] --> lut_mode = 2
<4>[   31.981431] --> lut_temp = 8
<4>[   31.981451] --> waveformoffset = 0x67
<4>[   31.981476] 5f, 1, 0, 60
<4>[   31.982176] --> lut_temp = 40
<6>[   32.361046] DWC_OTG: ********soft reconnect******************************************
<6>[   32.552391] DWC_OTG: ********soft connect!!!*****************************************
<6>[   32.558396] DWC_OTG: USB SUSPEND
<6>[   32.771177] DWC_OTG: USB RESET
<6>[   32.846707] DWC_OTG: USB RESET
<6>[   32.932055] android_usb gadget: high speed config #1: android
<6>[   32.932486] android_work: sent uevent USB_STATE=CONFIGURED
<4>[   33.561194] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   33.561250] --> lut_mode = 2
<4>[   33.561291] --> lut_temp = 8
<4>[   33.561312] --> waveformoffset = 0x67
<4>[   33.561337] 5f, 1, 0, 60
<4>[   33.562029] --> lut_temp = 40
<3>[   40.584385] [slr] axp_charging_monitor,1477
<4>[   40.585463] axp battery hardware current direction 0
<4>[   40.691241] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   40.691319] --> lut_mode = 2
<4>[   40.691410] --> lut_temp = 8
<4>[   40.691433] --> waveformoffset = 0x67
<4>[   40.691460] 5f, 1, 0, 60
<4>[   40.692175] --> lut_temp = 40
<4>[   41.181280] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   41.181388] --> lut_mode = 2
<4>[   41.181435] --> lut_temp = 8
<4>[   41.181477] --> waveformoffset = 0x67
<4>[   41.181528] 5f, 1, 0, 60
<4>[   41.182893] --> lut_temp = 40
<4>[   44.741214] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   44.741270] --> lut_mode = 2
<4>[   44.741331] --> lut_temp = 8
<4>[   44.741352] --> waveformoffset = 0x67
<4>[   44.741377] 5f, 1, 0, 60
<4>[   44.742056] --> lut_temp = 40
<4>[   45.231257] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   45.231363] --> lut_mode = 2
<4>[   45.231412] --> lut_temp = 8
<4>[   45.231454] --> waveformoffset = 0x67
<4>[   45.231505] 5f, 1, 0, 60
<4>[   45.232860] --> lut_temp = 40
<3>[   50.604664] [slr] axp_charging_monitor,1477
<4>[   50.605873] axp battery hardware current direction 1
<4>[   56.961227] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   56.961284] --> lut_mode = 2
<4>[   56.961346] --> lut_temp = 8
<4>[   56.961367] --> waveformoffset = 0x67
<4>[   56.961392] 5f, 1, 0, 60
<4>[   56.962074] --> lut_temp = 40
<4>[   57.451313] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   57.451422] --> lut_mode = 2
<4>[   57.451469] --> lut_temp = 8
<4>[   57.451511] --> waveformoffset = 0x67
<4>[   57.451562] 5f, 1, 0, 60
<4>[   57.452965] --> lut_temp = 40
<4>[   59.121280] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   59.121334] --> lut_mode = 2
<4>[   59.121363] --> lut_temp = 8
<4>[   59.121384] --> waveformoffset = 0x67
<4>[   59.121409] 5f, 1, 0, 60
<4>[   59.122094] --> lut_temp = 40
<4>[   59.611293] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   59.611401] --> lut_mode = 2
<4>[   59.611449] --> lut_temp = 8
<4>[   59.611491] --> waveformoffset = 0x67
<4>[   59.611541] 5f, 1, 0, 60
<4>[   59.612881] --> lut_temp = 40
<3>[   60.624694] [slr] axp_charging_monitor,1477
<4>[   62.191198] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   62.191254] --> lut_mode = 2
<4>[   62.191302] --> lut_temp = 8
<4>[   62.191324] --> waveformoffset = 0x67
<4>[   62.191348] 5f, 1, 0, 60
<4>[   62.192051] --> lut_temp = 40
<4>[   62.681287] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   62.681396] --> lut_mode = 2
<4>[   62.681440] --> lut_temp = 8
<4>[   62.681484] --> waveformoffset = 0x67
<4>[   62.681535] 5f, 1, 0, 60
<4>[   62.682907] --> lut_temp = 40
<4>[   64.381237] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   64.381292] --> lut_mode = 2
<4>[   64.381339] --> lut_temp = 8
<4>[   64.381360] --> waveformoffset = 0x67
<4>[   64.381385] 5f, 1, 0, 60
<4>[   64.382068] --> lut_temp = 40
<4>[   64.871305] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   64.871413] --> lut_mode = 2
<4>[   64.871464] --> lut_temp = 8
<4>[   64.871506] --> waveformoffset = 0x67
<4>[   64.871558] 5f, 1, 0, 60
<4>[   64.872915] --> lut_temp = 40
<4>[   66.411201] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   66.411266] --> lut_mode = 2
<4>[   66.411330] --> lut_temp = 8
<4>[   66.411351] --> waveformoffset = 0x67
<4>[   66.411376] 5f, 1, 0, 60
<4>[   66.412060] --> lut_temp = 40
<4>[   66.901277] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   66.901386] --> lut_mode = 2
<4>[   66.901432] --> lut_temp = 8
<4>[   66.901475] --> waveformoffset = 0x67
<4>[   66.901527] 5f, 1, 0, 60
<4>[   66.902884] --> lut_temp = 40
<4>[   68.561268] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   68.561335] --> lut_mode = 2
<4>[   68.561365] --> lut_temp = 8
<4>[   68.561386] --> waveformoffset = 0x67
<4>[   68.561411] 5f, 1, 0, 60
<4>[   68.562094] --> lut_temp = 40
<4>[   69.051297] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   69.051405] --> lut_mode = 2
<4>[   69.051454] --> lut_temp = 8
<4>[   69.051496] --> waveformoffset = 0x67
<4>[   69.051546] 5f, 1, 0, 60
<4>[   69.052884] --> lut_temp = 40
<3>[   70.644665] [slr] axp_charging_monitor,1477
<4>[   70.645866] axp battery hardware current direction 0
<4>[   79.681215] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   79.681270] --> lut_mode = 2
<4>[   79.681341] --> lut_temp = 8
<4>[   79.681363] --> waveformoffset = 0x67
<4>[   79.681388] 5f, 1, 0, 60
<4>[   79.682070] --> lut_temp = 40
<4>[   80.171420] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   80.171528] --> lut_mode = 2
<4>[   80.171575] --> lut_temp = 8
<4>[   80.171626] --> waveformoffset = 0x67
<4>[   80.171775] 5f, 1, 0, 60
<4>[   80.173199] --> lut_temp = 40
<4>[   80.661349] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   80.661457] --> lut_mode = 2
<4>[   80.661504] --> lut_temp = 8
<4>[   80.661546] --> waveformoffset = 0x67
<4>[   80.661597] 5f, 1, 0, 60
<4>[   80.662981] --> lut_temp = 40
<3>[   80.666086] [slr] axp_charging_monitor,1477
<4>[   82.051231] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   82.051287] --> lut_mode = 2
<4>[   82.051338] --> lut_temp = 8
<4>[   82.051359] --> waveformoffset = 0x67
<4>[   82.051383] 5f, 1, 0, 60
<4>[   82.052082] --> lut_temp = 40
<4>[   82.541262] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   82.541368] --> lut_mode = 2
<4>[   82.541415] --> lut_temp = 8
<4>[   82.541457] --> waveformoffset = 0x67
<4>[   82.541508] 5f, 1, 0, 60
<4>[   82.542867] --> lut_temp = 40
<4>[   86.011197] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   86.011252] --> lut_mode = 2
<4>[   86.011294] --> lut_temp = 8
<4>[   86.011315] --> waveformoffset = 0x67
<4>[   86.011340] 5f, 1, 0, 60
<4>[   86.012037] --> lut_temp = 40
<4>[   86.501287] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   86.501396] --> lut_mode = 2
<4>[   86.501441] --> lut_temp = 8
<4>[   86.501506] --> waveformoffset = 0x67
<4>[   86.501559] 5f, 1, 0, 60
<4>[   86.502899] --> lut_temp = 40
<4>[   89.041222] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   89.041279] --> lut_mode = 2
<4>[   89.041333] --> lut_temp = 8
<4>[   89.041354] --> waveformoffset = 0x67
<4>[   89.041379] 5f, 1, 0, 60
<4>[   89.042078] --> lut_temp = 40
<4>[   89.531242] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   89.531368] --> lut_mode = 2
<4>[   89.531413] --> lut_temp = 8
<4>[   89.531455] --> waveformoffset = 0x67
<4>[   89.531506] 5f, 1, 0, 60
<4>[   89.532841] --> lut_temp = 40
<3>[   90.684634] [slr] axp_charging_monitor,1477
<4>[   90.685840] axp battery hardware current direction 1
<4>[   96.221221] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   96.221275] --> lut_mode = 2
<4>[   96.221306] --> lut_temp = 8
<4>[   96.221326] --> waveformoffset = 0x67
<4>[   96.221351] 5f, 1, 0, 60
<4>[   96.222044] --> lut_temp = 40
<4>[   96.711192] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   96.711247] --> lut_mode = 2
<4>[   96.711275] --> lut_temp = 8
<4>[   96.711296] --> waveformoffset = 0x67
<4>[   96.711321] 5f, 1, 0, 60
<4>[   96.712002] --> lut_temp = 40
<4>[   97.201284] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   97.201392] --> lut_mode = 1
<4>[   97.201441] --> lut_temp = 8
<4>[   97.201483] --> waveformoffset = 0x63
<4>[   97.201533] ef, 0, 0, ef
<4>[   97.202400] --> lut_temp = 23
<4>[   97.991211] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   97.991267] --> lut_mode = 2
<4>[   97.991320] --> lut_temp = 8
<4>[   97.991341] --> waveformoffset = 0x67
<4>[   97.991366] 5f, 1, 0, 60
<4>[   97.992058] --> lut_temp = 40
<4>[   98.481291] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[   98.481400] --> lut_mode = 2
<4>[   98.481447] --> lut_temp = 8
<4>[   98.481489] --> waveformoffset = 0x67
<4>[   98.481540] 5f, 1, 0, 60
<4>[   98.482902] --> lut_temp = 40
<3>[  100.704638] [slr] axp_charging_monitor,1477
<4>[  102.401293] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  102.401352] --> lut_mode = 2
<4>[  102.401386] --> lut_temp = 8
<4>[  102.401406] --> waveformoffset = 0x67
<4>[  102.401431] 5f, 1, 0, 60
<4>[  102.402120] --> lut_temp = 40
<4>[  102.891284] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  102.891351] --> lut_mode = 2
<4>[  102.891465] --> lut_temp = 8
<4>[  102.891489] --> waveformoffset = 0x67
<4>[  102.891516] 5f, 1, 0, 60
<4>[  102.892254] --> lut_temp = 40
<4>[  103.381311] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  103.381449] --> lut_mode = 2
<4>[  103.381501] --> lut_temp = 8
<4>[  103.381543] --> waveformoffset = 0x67
<4>[  103.381595] 5f, 1, 0, 60
<4>[  103.382935] --> lut_temp = 40
<4>[  103.871289] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  103.871398] --> lut_mode = 2
<4>[  103.871448] --> lut_temp = 8
<4>[  103.871490] --> waveformoffset = 0x67
<4>[  103.871540] 5f, 1, 0, 60
<4>[  103.872884] --> lut_temp = 40
<4>[  104.361192] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  104.361248] --> lut_mode = 2
<4>[  104.361311] --> lut_temp = 8
<4>[  104.361332] --> waveformoffset = 0x67
<4>[  104.361357] 5f, 1, 0, 60
<4>[  104.362037] --> lut_temp = 40
<4>[  104.851336] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  104.851443] --> lut_mode = 2
<4>[  104.851488] --> lut_temp = 8
<4>[  104.851531] --> waveformoffset = 0x67
<4>[  104.851582] 5f, 1, 0, 60
<4>[  104.852941] --> lut_temp = 40
<4>[  105.481202] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  105.481259] --> lut_mode = 2
<4>[  105.481335] --> lut_temp = 8
<4>[  105.481357] --> waveformoffset = 0x67
<4>[  105.481383] 5f, 1, 0, 60
<4>[  105.482067] --> lut_temp = 40
<4>[  105.971182] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  105.971238] --> lut_mode = 2
<4>[  105.971290] --> lut_temp = 8
<4>[  105.971312] --> waveformoffset = 0x67
<4>[  105.971337] 5f, 1, 0, 60
<4>[  105.972033] --> lut_temp = 40
<4>[  106.461179] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  106.461236] --> lut_mode = 2
<4>[  106.461262] --> lut_temp = 8
<4>[  106.461285] --> waveformoffset = 0x67
<4>[  106.461310] 5f, 1, 0, 60
<4>[  106.461999] --> lut_temp = 40
<4>[  106.951201] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  106.951257] --> lut_mode = 2
<4>[  106.951306] --> lut_temp = 8
<4>[  106.951337] --> waveformoffset = 0x67
<4>[  106.951363] 5f, 1, 0, 60
<4>[  106.952041] --> lut_temp = 40
<4>[  108.171206] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  108.171262] --> lut_mode = 2
<4>[  108.171315] --> lut_temp = 8
<4>[  108.171336] --> waveformoffset = 0x67
<4>[  108.171361] 5f, 1, 0, 60
<4>[  108.172076] --> lut_temp = 40
<4>[  108.661210] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  108.661266] --> lut_mode = 2
<4>[  108.661318] --> lut_temp = 8
<4>[  108.661339] --> waveformoffset = 0x67
<4>[  108.661365] 5f, 1, 0, 60
<4>[  108.662061] --> lut_temp = 40
<4>[  109.151318] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  109.151425] --> lut_mode = 2
<4>[  109.151472] --> lut_temp = 8
<4>[  109.151514] --> waveformoffset = 0x67
<4>[  109.151566] 5f, 1, 0, 60
<4>[  109.152923] --> lut_temp = 40
<3>[  110.724657] [slr] axp_charging_monitor,1477
<4>[  114.031204] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  114.031261] --> lut_mode = 2
<4>[  114.031291] --> lut_temp = 8
<4>[  114.031311] --> waveformoffset = 0x67
<4>[  114.031336] 5f, 1, 0, 60
<4>[  114.032020] --> lut_temp = 40
<4>[  114.521290] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  114.521398] --> lut_mode = 2
<4>[  114.521448] --> lut_temp = 8
<4>[  114.521490] --> waveformoffset = 0x67
<4>[  114.521541] 5f, 1, 0, 60
<4>[  114.522901] --> lut_temp = 40
<6>[  118.890736] [AXP22]press long
<3>[  120.744595] [slr] axp_charging_monitor,1477
<6>[  120.891081] [AXP22]press long up
<6>[  120.891153] [AXP22]event = 0x10000
<4>[  121.091411] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  121.091520] --> lut_mode = 2
<4>[  121.091567] --> lut_temp = 8
<4>[  121.091618] --> waveformoffset = 0x67
<4>[  121.091730] 5f, 1, 0, 60
<4>[  121.093117] --> lut_temp = 40
<4>[  123.811230] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  123.811291] --> lut_mode = 2
<4>[  123.811324] --> lut_temp = 8
<4>[  123.811345] --> waveformoffset = 0x67
<4>[  123.811370] 5f, 1, 0, 60
<4>[  123.812088] --> lut_temp = 40
<4>[  124.301272] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  124.301380] --> lut_mode = 2
<4>[  124.301429] --> lut_temp = 8
<4>[  124.301472] --> waveformoffset = 0x67
<4>[  124.301523] 5f, 1, 0, 60
<4>[  124.302870] --> lut_temp = 40
<4>[  129.231235] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  129.231291] --> lut_mode = 2
<4>[  129.231326] --> lut_temp = 8
<4>[  129.231347] --> waveformoffset = 0x67
<4>[  129.231372] 5f, 1, 0, 60
<4>[  129.232050] --> lut_temp = 40
<4>[  129.721301] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  129.721409] --> lut_mode = 2
<4>[  129.721459] --> lut_temp = 8
<4>[  129.721501] --> waveformoffset = 0x67
<4>[  129.721553] 5f, 1, 0, 60
<4>[  129.722918] --> lut_temp = 40
<4>[  130.211182] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  130.211238] --> lut_mode = 2
<4>[  130.211268] --> lut_temp = 8
<4>[  130.211288] --> waveformoffset = 0x67
<4>[  130.211314] 5f, 1, 0, 60
<4>[  130.211994] --> lut_temp = 40
<4>[  130.701177] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  130.701234] --> lut_mode = 2
<4>[  130.701282] --> lut_temp = 8
<4>[  130.701303] --> waveformoffset = 0x67
<4>[  130.701328] 5f, 1, 0, 60
<4>[  130.702012] --> lut_temp = 40
<3>[  130.764348] [slr] axp_charging_monitor,1477
<4>[  131.191181] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  131.191237] --> lut_mode = 2
<4>[  131.191264] --> lut_temp = 8
<4>[  131.191285] --> waveformoffset = 0x67
<4>[  131.191310] 5f, 1, 0, 60
<4>[  131.191992] --> lut_temp = 40
<4>[  131.841404] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  131.841538] --> lut_mode = 2
<4>[  131.841588] --> lut_temp = 8
<4>[  131.841638] --> waveformoffset = 0x67
<4>[  131.841791] 5f, 1, 0, 60
<4>[  131.843417] --> lut_temp = 40
<4>[  132.881215] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  132.881271] --> lut_mode = 2
<4>[  132.881340] --> lut_temp = 8
<4>[  132.881362] --> waveformoffset = 0x67
<4>[  132.881387] 5f, 1, 0, 60
<4>[  132.882069] --> lut_temp = 40
<4>[  133.371270] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  133.371378] --> lut_mode = 2
<4>[  133.371422] --> lut_temp = 8
<4>[  133.371465] --> waveformoffset = 0x67
<4>[  133.371516] 5f, 1, 0, 60
<4>[  133.372867] --> lut_temp = 40
<4>[  133.961203] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  133.961260] --> lut_mode = 2
<4>[  133.961309] --> lut_temp = 8
<4>[  133.961330] --> waveformoffset = 0x67
<4>[  133.961356] 5f, 1, 0, 60
<4>[  133.962071] --> lut_temp = 40
<4>[  134.451330] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  134.451438] --> lut_mode = 2
<4>[  134.451483] --> lut_temp = 8
<4>[  134.451526] --> waveformoffset = 0x67
<4>[  134.451578] 5f, 1, 0, 60
<4>[  134.452931] --> lut_temp = 40
<4>[  134.941179] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  134.941235] --> lut_mode = 2
<4>[  134.941286] --> lut_temp = 8
<4>[  134.941308] --> waveformoffset = 0x67
<4>[  134.941333] 5f, 1, 0, 60
<4>[  134.942026] --> lut_temp = 40
<4>[  135.431260] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  135.431367] --> lut_mode = 2
<4>[  135.431413] --> lut_temp = 8
<4>[  135.431457] --> waveformoffset = 0x67
<4>[  135.431530] 5f, 1, 0, 60
<4>[  135.432866] --> lut_temp = 40
<4>[  135.921185] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  135.921238] --> lut_mode = 2
<4>[  135.921268] --> lut_temp = 8
<4>[  135.921289] --> waveformoffset = 0x67
<4>[  135.921314] 5f, 1, 0, 60
<4>[  135.921999] --> lut_temp = 40
<4>[  136.411261] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  136.411369] --> lut_mode = 2
<4>[  136.411416] --> lut_temp = 8
<4>[  136.411458] --> waveformoffset = 0x67
<4>[  136.411510] 5f, 1, 0, 60
<4>[  136.412870] --> lut_temp = 40
<4>[  137.231217] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  137.231273] --> lut_mode = 2
<4>[  137.231323] --> lut_temp = 8
<4>[  137.231345] --> waveformoffset = 0x67
<4>[  137.231370] 5f, 1, 0, 60
<4>[  137.232055] --> lut_temp = 40
<4>[  137.721364] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  137.721473] --> lut_mode = 2
<4>[  137.721519] --> lut_temp = 8
<4>[  137.721561] --> waveformoffset = 0x67
<4>[  137.721613] 5f, 1, 0, 60
<4>[  137.722972] --> lut_temp = 40
<4>[  138.211177] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  138.211242] --> lut_mode = 2
<4>[  138.211309] --> lut_temp = 8
<4>[  138.211330] --> waveformoffset = 0x67
<4>[  138.211356] 5f, 1, 0, 60
<4>[  138.212035] --> lut_temp = 40
<4>[  138.701265] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  138.701374] --> lut_mode = 2
<4>[  138.701421] --> lut_temp = 8
<4>[  138.701464] --> waveformoffset = 0x67
<4>[  138.701515] 5f, 1, 0, 60
<4>[  138.702878] --> lut_temp = 40
<4>[  140.411241] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  140.411296] --> lut_mode = 2
<4>[  140.411352] --> lut_temp = 8
<4>[  140.411373] --> waveformoffset = 0x67
<4>[  140.411398] 5f, 1, 0, 60
<4>[  140.412094] --> lut_temp = 40
<3>[  140.784392] [slr] axp_charging_monitor,1477
<4>[  140.901256] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  140.901363] --> lut_mode = 2
<4>[  140.901409] --> lut_temp = 8
<4>[  140.901451] --> waveformoffset = 0x67
<4>[  140.901502] 5f, 1, 0, 60
<4>[  140.902865] --> lut_temp = 40
<4>[  142.731213] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  142.731268] --> lut_mode = 2
<4>[  142.731304] --> lut_temp = 8
<4>[  142.731325] --> waveformoffset = 0x67
<4>[  142.731350] 5f, 1, 0, 60
<4>[  142.732048] --> lut_temp = 40
<4>[  143.221306] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  143.221413] --> lut_mode = 2
<4>[  143.221465] --> lut_temp = 8
<4>[  143.221507] --> waveformoffset = 0x67
<4>[  143.221581] 5f, 1, 0, 60
<4>[  143.222916] --> lut_temp = 40
<4>[  143.941205] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  143.941261] --> lut_mode = 2
<4>[  143.941341] --> lut_temp = 8
<4>[  143.941362] --> waveformoffset = 0x67
<4>[  143.941388] 5f, 1, 0, 60
<4>[  143.942066] --> lut_temp = 40
<4>[  144.431281] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  144.431388] --> lut_mode = 2
<4>[  144.431440] --> lut_temp = 8
<4>[  144.431482] --> waveformoffset = 0x67
<4>[  144.431533] 5f, 1, 0, 60
<4>[  144.432882] --> lut_temp = 40
<4>[  145.051232] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  145.051299] --> lut_mode = 2
<4>[  145.051369] --> lut_temp = 8
<4>[  145.051390] --> waveformoffset = 0x67
<4>[  145.051416] 5f, 1, 0, 60
<4>[  145.052099] --> lut_temp = 40
<4>[  145.541298] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  145.541407] --> lut_mode = 2
<4>[  145.541454] --> lut_temp = 8
<4>[  145.541496] --> waveformoffset = 0x67
<4>[  145.541548] 5f, 1, 0, 60
<4>[  145.542899] --> lut_temp = 40
<4>[  148.201208] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  148.201264] --> lut_mode = 2
<4>[  148.201316] --> lut_temp = 8
<4>[  148.201338] --> waveformoffset = 0x67
<4>[  148.201362] 5f, 1, 0, 60
<4>[  148.202056] --> lut_temp = 40
<4>[  148.691269] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  148.691379] --> lut_mode = 2
<4>[  148.691426] --> lut_temp = 8
<4>[  148.691468] --> waveformoffset = 0x67
<4>[  148.691520] 5f, 1, 0, 60
<4>[  148.692883] --> lut_temp = 40
<4>[  149.471219] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  149.471275] --> lut_mode = 2
<4>[  149.471308] --> lut_temp = 8
<4>[  149.471328] --> waveformoffset = 0x67
<4>[  149.471353] 5f, 1, 0, 60
<4>[  149.472036] --> lut_temp = 40
<4>[  149.961274] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  149.961381] --> lut_mode = 2
<4>[  149.961426] --> lut_temp = 8
<4>[  149.961472] --> waveformoffset = 0x67
<4>[  149.961523] 5f, 1, 0, 60
<4>[  149.962857] --> lut_temp = 40
<4>[  150.801243] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  150.801299] --> lut_mode = 2
<4>[  150.801390] --> lut_temp = 8
<4>[  150.801412] --> waveformoffset = 0x67
<4>[  150.801438] 5f, 1, 0, 60
<4>[  150.802148] --> lut_temp = 40
<3>[  150.805023] [slr] axp_charging_monitor,1477
<4>[  151.291206] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  151.291264] --> lut_mode = 2
<4>[  151.291344] --> lut_temp = 8
<4>[  151.291367] --> waveformoffset = 0x67
<4>[  151.291395] 5f, 1, 0, 60
<4>[  151.292383] --> lut_temp = 40
<4>[  151.781175] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  151.781230] --> lut_mode = 2
<4>[  151.781282] --> lut_temp = 8
<4>[  151.781304] --> waveformoffset = 0x67
<4>[  151.781329] 5f, 1, 0, 60
<4>[  151.782025] --> lut_temp = 40
<4>[  152.271279] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  152.271386] --> lut_mode = 2
<4>[  152.271433] --> lut_temp = 8
<4>[  152.271475] --> waveformoffset = 0x67
<4>[  152.271526] 5f, 1, 0, 60
<4>[  152.272883] --> lut_temp = 40
<4>[  152.761182] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  152.761237] --> lut_mode = 2
<4>[  152.761285] --> lut_temp = 8
<4>[  152.761306] --> waveformoffset = 0x67
<4>[  152.761331] 5f, 1, 0, 60
<4>[  152.762026] --> lut_temp = 40
<4>[  153.251305] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  153.251413] --> lut_mode = 2
<4>[  153.251461] --> lut_temp = 8
<4>[  153.251503] --> waveformoffset = 0x67
<4>[  153.251554] 5f, 1, 0, 60
<4>[  153.252923] --> lut_temp = 40
<4>[  153.741178] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  153.741243] --> lut_mode = 2
<4>[  153.741307] --> lut_temp = 8
<4>[  153.741329] --> waveformoffset = 0x67
<4>[  153.741355] 5f, 1, 0, 60
<4>[  153.742038] --> lut_temp = 40
<4>[  154.231270] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  154.231377] --> lut_mode = 2
<4>[  154.231427] --> lut_temp = 8
<4>[  154.231468] --> waveformoffset = 0x67
<4>[  154.231520] 5f, 1, 0, 60
<4>[  154.232879] --> lut_temp = 40
<4>[  154.961203] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  154.961259] --> lut_mode = 2
<4>[  154.961310] --> lut_temp = 8
<4>[  154.961331] --> waveformoffset = 0x67
<4>[  154.961356] 5f, 1, 0, 60
<4>[  154.962035] --> lut_temp = 40
<4>[  155.451308] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  155.451417] --> lut_mode = 2
<4>[  155.451463] --> lut_temp = 8
<4>[  155.451506] --> waveformoffset = 0x67
<4>[  155.451558] 5f, 1, 0, 60
<4>[  155.452917] --> lut_temp = 40
<4>[  155.941178] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  155.941244] --> lut_mode = 2
<4>[  155.941311] --> lut_temp = 8
<4>[  155.941333] --> waveformoffset = 0x67
<4>[  155.941359] 5f, 1, 0, 60
<4>[  155.942038] --> lut_temp = 40
<4>[  156.431190] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  156.431245] --> lut_mode = 2
<4>[  156.431275] --> lut_temp = 8
<4>[  156.431295] --> waveformoffset = 0x67
<4>[  156.431320] 5f, 1, 0, 60
<4>[  156.432014] --> lut_temp = 40
<4>[  156.921307] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  156.921414] --> lut_mode = 2
<4>[  156.921465] --> lut_temp = 8
<4>[  156.921527] --> waveformoffset = 0x67
<4>[  156.921580] 5f, 1, 0, 60
<4>[  156.922910] --> lut_temp = 40
<4>[  158.531317] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  158.531382] --> lut_mode = 2
<4>[  158.531417] --> lut_temp = 8
<4>[  158.531437] --> waveformoffset = 0x67
<4>[  158.531462] 5f, 1, 0, 60
<4>[  158.532144] --> lut_temp = 40
<4>[  159.021287] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  159.021396] --> lut_mode = 2
<4>[  159.021445] --> lut_temp = 8
<4>[  159.021487] --> waveformoffset = 0x67
<4>[  159.021538] 5f, 1, 0, 60
<4>[  159.022894] --> lut_temp = 40
<3>[  160.824639] [slr] axp_charging_monitor,1477
<4>[  165.971231] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  165.971287] --> lut_mode = 2
<4>[  165.971341] --> lut_temp = 8
<4>[  165.971364] --> waveformoffset = 0x67
<4>[  165.971389] 5f, 1, 0, 60
<4>[  165.972085] --> lut_temp = 40
<4>[  166.461286] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  166.461395] --> lut_mode = 2
<4>[  166.461441] --> lut_temp = 8
<4>[  166.461483] --> waveformoffset = 0x67
<4>[  166.461534] 5f, 1, 0, 60
<4>[  166.462904] --> lut_temp = 40
<4>[  167.891280] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  167.891341] --> lut_mode = 2
<4>[  167.891379] --> lut_temp = 8
<4>[  167.891400] --> waveformoffset = 0x67
<4>[  167.891426] 5f, 1, 0, 60
<4>[  167.892155] --> lut_temp = 40
<4>[  168.381277] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  168.381387] --> lut_mode = 2
<4>[  168.381434] --> lut_temp = 8
<4>[  168.381476] --> waveformoffset = 0x67
<4>[  168.381527] 5f, 1, 0, 60
<4>[  168.382885] --> lut_temp = 40
<4>[  169.391290] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  169.391352] --> lut_mode = 2
<4>[  169.391388] --> lut_temp = 8
<4>[  169.391410] --> waveformoffset = 0x67
<4>[  169.391436] 5f, 1, 0, 60
<4>[  169.392160] --> lut_temp = 40
<4>[  169.881277] <Mode description> : reset | gray2 | gray4 | gc16 | A2 = 0 | 1 | 7 | 2 | 6
<4>[  169.881385] --> lut_mode = 2
<4>[  169.881433] --> lut_temp = 8
<4>[  169.881475] --> waveformoffset = 0x67
<4>[  169.881526] 5f, 1, 0, 60
<4>[  169.882889] --> lut_temp = 40
<3>[  170.844619] [slr] axp_charging_monitor,1477
<3>[  180.864641] [slr] axp_charging_monitor,1477
<3>[  190.884616] [slr] axp_charging_monitor,1477

edit: framebuffer size in system.img:
Code:
# cat /sys/devices/platform/rk-fb/graphics/fb*/screen_info
xres:1448
yres:1072
fps:0
xres:1448
yres:1072
fps:0
edit 2, FAQ addition:
This device enters recovery by holding next+power for 7 seconds, adb is not enabled by default. Prev+next+power boots into rockchip loader.

Last edited by plus; 07-08-2016 at 04:29 PM. Reason: enter recovery on JDRead shine T63HD-JD
plus is offline   Reply With Quote