Quote:
Originally Posted by geekmaster
Ahh. Thanks. Neither has a bezel at the moment. Now I will know which goes on which, so thanks!. Now how do I tell where the Silver and Black screws go? Other than color, they look identical. 
|
Larger black screws go on the front to fasten it to the back of the case.
Tiny black screw goes with the little aluminum rectangle with slot and hole that fastens one corner down.
Bronze 'hat' washer with silver screw goes in hole closest to the aluminum rectangle.
Silver screws without hat washers go closest to the USB port.
Before replacing the back, note the location of the two snaps at the side of the battery. After replacing the back, you'll want to lay the PW down on a hard surface and apply pressure over those snaps to lock them into place. If those are not in place, the kindle can be rocked from side to side if laid on its back on a hard surface.