[kenxl]

here is the boot log:

Please use spoiler tags for such a long post - MODERATOR]

Spoiler:

-
U-Boot 2009.08-lab126 (Nov 29 2012 - 23:18:55)

CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 800000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
Board: Celeste WFO (256 MB)
Boot Reason: [POR]
Boot Device: MMC
Board Id: ----------------------
S/N: ------------------------
DRAM: 256 MB
Using default environment

In: serial
Out: logbuff
Err: logbuff
Quick Memory Test 0x70000000, 0xfffc000
POST done in 17 ms
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 70800000 ...
Image Name: Linux-2.6.31-rt11-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4748160 Bytes = 4.5 MB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
MX50 LPDDR2 MfgID: 0x1 [Samsung]
2.6.31-rt11-lab126 #1 Tue Jun 23 04:29:16 PDT 2015 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/43712 size=1432354816 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 2797552
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:

BOOTING DEFAULT.
argc == 12
argv[0]: "kinit"
argv[1]: "consoleblank=0"
argv[2]: "rootwait"
argv[3]: "ro"
argv[4]: "ip=off"
argv[5]: "root=/dev/mmcblk0p1"
argv[6]: "quiet"
argv[7]: "eink=fslepdc"
argv[8]: "video=mxcepdcfb:E60,bpp=8,x_mem=4M"
argv[9]: "mem=256M"
argv[10]: "user_debug=0x1"
argv[11]: "console=ttymxc0,115200"
argc == 4
argv[0]: "IP-Config"
argv[1]: "-i"
argv[2]: "Linux kinit"
argv[3]: "ip=off"
IP-Config: no devices to configure
kinit: do_mounts
kinit: name_to_dev_t(/dev/mmcblk0p1) = dev(179,1)
kinit: root_dev = dev(179,1)
kinit: /dev/root appears to be a ext3 filesystem
kinit: trying to mount /dev/root on /root with type ext3
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:5.80:49.1:
info milestone:5.86:49.2:
info milestone:5.89:49.3:
info milestone:5.94:49.4:
info milestone:5.99:49.5:
info sytem:mounted_tmpfs::
info milestone:6.07:sy50:
info system:start:time=6100:
info hardware:no_wan::WiFi only device. No WAN found
info system:configlatform=yoshime3,board=celeste,rev= 21,proto=Y,wifi=Y,wan=N:
info milestone:6.31:sy51:
lipc-send-event[550]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[550]: C def:dbusi::Failed to init dbus
lipc-send-event[550]: E defpen::Failed to open LIPC
lipc-send-event[550]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[555]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[555]: C def:dbusi::Failed to init dbus
lipc-send-event[555]: E defpen::Failed to open LIPC
lipc-send-event[555]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:7.06:sy99:
info system:done:time=7090:
crond[586]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: sshd main process (584) terminated with status 2
init.exe: sshd main process ended, respawning
init.exe: recevent pre-start process (589) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
info system_cramfs_loopbacks:mounted:Image /lib/firmware/cyttsp.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.11:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:



Welcome to Kindle!

kindle login: info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:8.62:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:10.36:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:10.45:fs25:
info milestone:10.53:vi00:
info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info milestone:11.01:vi99:
info display:started:time=11030:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=11260,action=start:
info battery:charged:cap=100,mV=4193,mAH=1393:
info userstore:start:found_bootup_flag:Found BOOTUP flag file
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:12.46:fs50:
info milestone:12.50:fs90:
info milestone:12.54:fs99:
info milestone:12.58:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:15.12:xx00:
info X:load:time=15250:
info X:xorg.conf:Generating xorg.conf:
info X:makexconfig:Celeste Input device detection status:
info X:makexconfig:Touch device: OK:
info X:makexconfig:Accelerometer device: N/A !!:
info X:xorg.conf:xorg.conf generated:
info milestone:17.51:xx50:
info X:starting:time=17560:
info milestone:22.51:xx99:
info X:started:time=22560:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_US.UTF-8,lc_all=en_US.UTF-8:Retrieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
info blanket_f:module already loaded:splash:
info milestone:25.09i00:
info milestone:25.39i99:
info hardware:no_wan::WiFi only device. No WAN found
info board_data_file :/opt/ar6k/target/AR6003/hw2.1.1/bin/yoshime3/celeste/wfo/AR6003_wfo_calfile.bin::
info wifim:enablediv:enabling antenna diversity for wifi...:
MAC from kernel xx:xx:xx:xx:xx:EA
boot: I def:rbt:reset=user_reboot,version=268989:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:31.10:fr00:
info milestone:31.23:fr50:
info milestone:31.39:fr51:
info framework:starting:time=34240: