Quote:
Originally Posted by knc1
Edit out (replace with xxxx's) all of your serial number except the first four characters in your post!
A B01B model is indeed a PW-1:
https://wiki.mobileread.com/wiki/Kindle_Serial_Numbers
Have you tried to get help from the author of the article you are following or the site which hosts the article?
With what result?
Have you tried following the directions in the output you posted?
Code:
INFO:eink initialized... (786432 bytes)
Press [ENTER] for recovery menu... 0
INFO:!!! Checking MBR /dev/mmcblk0 !!!!
Have you checked this site for the step-by-step for using the recovery menu to install the missing 'main' operating system?
Keep in mind that you want to first install a 'main' system version old enough to use our PW-1 software jailbreak.
Don't jump directly to 5.6.1.1 version.
Getting older than current firmware packages from Amazon is a FGA -
Use the desired PW-1 firmware version number in these (PW-2 Example) directions:
https://www.mobileread.com/forums/sho...postcount=1301
Use the recovery menu to export the USB drive (USB drive mode) -
Place desired Amazon firmware package on root of drive -
Reboot -
done.
= = = =
PS: You did not need to open the PW-1 or install a serial port to un-demo it.
The required commands are available in the main search bar -
There is a recent thread here on the subject, the summary:
https://www.mobileread.com/forums/sho...29&postcount=6
Read posts #6 ... #10
They include information you will need in the above directions. |
Hello mate, i edit serial number. I write email to author of
this manual, add comments
here and
here about my problem but have no answer
.
In the recovery menu i have only this
Code:
Menu
====
3. Load MMC0 over USB storage
4. Erase MMC0
I. Initialize Partition Table (fdisk) and format FAT
O. Format and overwrite FAT partition
E. Export FAT partition
U. Update using update*.bin file on FAT partition
M. Update using update*.bin file on FAT partition of second MMC port
D. dmesg / kernel printk ring buffer.
Q. quit
Choose: 10 /