I'll PM you a temporary download link.
Here is what KindleTool has to say about the file:
Code:
Extracting update package 'update_20141128.bin' to 'kv-package'.
Bundle FB02 (Fullbin [signed?])
Bundle Type Recovery
MD5 Hash d5c1754684f8744abc18692ef9d154f6
Magic 1 2048630901
Magic 2 1897089723
Minor 1
Header Rev 2
Platform Wario
Board Unspecified
x update-J5-wario_icewine-049.dat
x imx60_wario/u-boot.bin
x imx60_wario/u-boot.bin.sig
x imx60_wario/uImage
x imx60_wario/uImage.sig
x rootfs.img.gz
x rootfs.img.gz.sig
x data.stgz
x data.stgz.sig
x update-J5-wario_icewine-049.dat.sig
You will need to put the downloaded file in the root of the visible USB storage.
If you can't see the USB storage when you connect to your PC, you can use the recovery menu (below).
You will want to repeat the booting into diags (directions given above),
only this time, catch this stopping point:
Code:
3.0.35-lab126 #1 PREEMPT Fri Jul 31 15:04:21 PDT 2015 armv7l
Press [ENTER] for recovery menu...
Holding enter down as the kernel starts up will do just as well.
Now you will be using the touch screen.
Please stay away from the "Erase MMC" selection - yes, it does work - no need to try it out.
If you haven't yet put the factory install file on USB visible storage, then:
Use the recovery menu to export USB storage (user storage)
Connect Kindle-to-PC cable
copy the update file to the top level of visible storage
safely remove or eject - depending on your PC system
Remove Kindle-to-PC cable
Note: you may have to un-export USB storage at this point.
Now use the: "load mmc from update file" selection.
(or whatever it is called - the above is what my memory returns)
Note: you may have to go through the re-boot, boot diags, catch the Recovery Menu sequence again, just to reach the above command selection.
(Translation: I don't recall if it can be updated while the USB storage is exported.)
Edit: PM sent.