Quote:
Originally Posted by knc1
You failed to mention **which** flavor of Linux (which distribution, name and version) you have running in your VM.
It may make a difference and I can not see over your shoulder.
|
I use openSUSE 12.3
Quote:
Originally Posted by knc1
You have also failed to mention **HOW** you get your PW-3 into fastboot mode.
That may make a difference also.
|
I connected the serial port and startet Putty. At first i got a black screen without information. After pressing Enter i will get the "uboot >" on screen.
with "bist fastboot" i get into the fastboot mode.
Code:
uboot > bist fastboot
U-Boot 2009.08-lab126 (Apr 15 2015 - 07:39:13)
CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 32 C, calibration data 0x5805095f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Muscat WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: "xxx"
S/N: "xxx"
I2C: ready
DRAM: 512 MB
Using default environment
In: serial
Out: serial
Err: serial
POST done in 0 ms
Battery voltage: 3932 mV
running cmd: fastboot
Entering fastboot mode...
Battery voltage: 3925 mV
Battery voltage: 3923 mV
USB speed: HIGH
Connected to USB host!
USB speed: HIGH
Connected to USB host!
Battery voltage: 3995 mV
Ok, i started totally wrong on this "unbrick"!
Can you please explain what i have to do first? What do i have to flash first/last?
Actually i thought i can follow this Tut (link below) but i do not have the right files. On beginning i thought i can extract all files i will need from the update package but you disabused me.
https://gist.github.com/TobiasWooldr...ca75190b9a473f