Quote:
Originally Posted by VariH2O
Unfortunately, I think not so successful. With further startup I get the console:
And yet. Then nothing is written. Not reaching to entering password (login Kindle / Kindle password),
This can be a problem in the firmware?
К сожалению, мне кажется так не увенчается успехом. При дальнейшем запуске я получаю в консоли:
И всё. Дальше ничего не пишется. Не доходит до ввода пароля (Киндл логин/ киндл password) ,
Это может быть проблема в прошивке?
|
There is no need to login in.
Forget about that, that is long past, the device has had the new image re-loaded.
Just leave it on the wall charger, give it time to recover.
(You can expect to be looking at the boy under the tree for at least a day or two.)
If it does not recover on its own, then it is a bad flash device (bad hardware).
Only replacing the flash chip will fix it.
= = = =
You have not yet given the full image update filename nor the link where you got it from.
This would be much easier if you would follow directions.
I don't ask you to do things, just to use up my time with the asking.
You have a 4Gbyte PW-2, the firmware for the earlier 2Gbyte PW-2 devices **will not** work!
And without the name and link, I have no idea what you are trying to load (the 'diags' on the PW-2 may not be checking the model correctly).
It makes absolutely no sense to ask for directions and then fail to follow them.
It is only a waste of your time to ask and a waste of my time to answer.