Quote:
Originally Posted by Booxtor
Additionally Onyx is going to use the newest flexible PVI HD screen with 2200x1650 (207 DPI) (just for comparison - Sony is using 1600 x1200 (150DPI)
Weight currently is about 400g.
Expected availability - spring of 2016.
|
Are they going to use the hi-res screen in the spring 2016 release?
Quote:
Originally Posted by Danimus
Regarding buttons placement. Why M92/M96 buttons placement is not applicable to 13.3" device? I'm not sure if device will be held below or in the middle while reading. I think that buttons should be need holding point. For me M92/M96 buttons placement and joystick are just great.
|
I also doubt I would hold the device close enough to the bottom edge to be comfortable with where they are in the prototype (or Booxtor's
suggestion of redesign). The positioning of L/R buttons in M9x is fine with me (although the buttons themselves are horrible rubbery kind of thing that not always register the key presses or the rubber is too soft). The i86 was good too apart from the build quality (of
my model anyway). And then there is Kindle and its
nice design of L/R buttons.
Also while I'm at it, i86 had a power button that was far too easy to accidentally press and send the device to sleep. Please ensure this button is recessed in Onyx 13.3.
Quote:
Originally Posted by Randy11
I want put the stylus away in the device. With the M92, you take the device and forget the stylus. If the stylus is tie to the device, it's not a good solution when you put the device in your bag.
The prototype seems use the same solution to hold the stylus than the SONY. My Samsung EB65 have a dedicated place in the frame of the reader.
|
I agree. Keep the loop for the fat stylus but also include a skinny one (like the one in M9x) that can be
hidden in the frame.