MobileRead Forums - View Single Post - can some help with my prs customization problem

ribcookie · 01-07-2009, 05:11 PM

fixed the problem from another post. u need the 1.3 firmware and the 1.3 customizer setting, now it works like a charm.

to sum it up i followed the instruction and everything worked like a charm, all the hacks worked as advertized, however whever i plugged in my usb the screen would turn white, however the usb and the book still worked and it communicated with the computer. when i unplugged the usb the screen was still white and i had to reboot the reader with a pin.

and the only way i could fix this is reflash the sony firmware. note i did not replace the firmware on the customizer, just ticked a few option. did an experience without ticking anyoptions, did the 5 and 6 things with the universial flasher and experienced the same results.

any ideas?

01-07-2009, 05:11 PM	#1
ribcookie Member Posts: 13 Karma: 10 Join Date: Nov 2008 Device: palm clie sl10, sony prs505, itouch, sony prs700, prs505, prsT1	can some help with my prs customization problem fixed the problem from another post. u need the 1.3 firmware and the 1.3 customizer setting, now it works like a charm. to sum it up i followed the instruction and everything worked like a charm, all the hacks worked as advertized, however whever i plugged in my usb the screen would turn white, however the usb and the book still worked and it communicated with the computer. when i unplugged the usb the screen was still white and i had to reboot the reader with a pin. and the only way i could fix this is reflash the sony firmware. note i did not replace the firmware on the customizer, just ticked a few option. did an experience without ticking anyoptions, did the 5 and 6 things with the universial flasher and experienced the same results. any ideas? Last edited by ribcookie; 01-07-2009 at 07:47 PM.