|
Push the card about 2 to 3mm into the T68 and it should then pop out, exposing about 2mm of the card for you to grab with your fingers.
If the card is really stuck (it shouldn't be), then you can take the back cover off to get better access to the card. Take a thin flat-head screwdriver. Start at the back/menu button and use the screwdriver to prise the seam open a bit. Then work the screwdriver about 10mm along the seam and repeat this until the back is separated completely. Slide the back cover downwards so that it slides sway from the SD card.
Now you can see the SD card slot clearly, and you should be able to remove the SD card.
A hint for reattaching the back cover. It's easy: just snap it back in place. But don't do it with an SD card in the card slot, as it is easy to break the SD card. I know!
Cheers, Warren
|