Quote:
Originally Posted by knc1
|
Are you sure this is PCI express mini? Because as you can see from the image there are only 50 pins, but it should be 52. And at least pin 21, 27 and 50 should, according to the website, be GND but they aren't on the PW2. And 48 should be 1.5 V but I'm not measuring it. At least assuming that pins 1-50 are equivalent and they just removed pins 51/52.
Quote:
You don't mention what test equipment you have available.
Its hard to make "howto" suggestions without that information.
|
I have a multimeter and a semi-decent soldering station at home. At work I could ask a colleague to take a look with an oscilloscope, and I have access to better soldering stations (both with a heated element and with hot air, dunno what the professional english terms are).