Quote:
Originally Posted by Purple Lady
7My settings were set to use the 71 number and I also had checked try suto connect if connection fails in settings. I guess the try auto connect is why the manual connect succeeded. I thought the auto connect would have used the same code as the manual connect and tried auto connect when the IP address specified in settings failed.
|
Auto-connect does use the same code as manual connect. The two times it failed (20/Nov and 21/Nov at 08:00), your desktop computer failed to answer CC's "is any calibre out there" query. The desktop did answer that query on the 19/Nov auto-connect and on the manual connect on 21/Nov.
What all this says is that something is different at 08:00. I see several possibilities:
- The desktop computer is off.
- The desktop computer is asleep. On 19/Nov and before, perhaps it was awakened by some Wake-On-Lan feature that no longer works with the new router.
- The device is connecting to a different WiFi access point at 08:00 than at 13:25.
- Calibre isn't running on the desktop computer when CC attempts to connect at 08:00.
Quote:
|
What I didn't tell you was that after I posted my problem and before I sent the log a I fixed the settings to use the new IP address(68). That's why 68 worked and 71 didn't. The tethering you saw was when I turned off wifi and used LTE on my tablet to make sure that the new IP worked when not connected to home wifi.
|
I don't see a successful Wireless Device connection to the 68. address except when you were tethered. There is a successful connection to the content server.
In any event you should have had another auto-connect attempt this morning. Did it work?