Quote:
Originally Posted by angomania
Need a little help.
I´ve opend my kindle PW3 and connected it to ttl serial adapter.
I´m using HTerm as terminal program and connect to my kindle (115200/8/1)
When the kindle is starting I see some output from your kindle startup in HTerm.
I´ve tried to stop autoboot by pressing a key (Hit any key to stop autoboot  but it won´t stop.
I´ve tried a lot of times but it wont stop. Here is some output (I´ve removed the serial from my pw3):
I also tried other terminal programs (putty, hyperterm) |
It might be that your RX connection isn't solid or that you have "Hardware Flow Control" enabled or something else mis configured.
On my first try I had "Hardware Flow Control" enabled in minicom and couldn't interrupt boot.
Try shorting TX and RX (remove wires from Kindle) and type something it should appear in the screen.
Try different setting