Need a little help.
I´ve opend my kindle PW3 and connected it to ttl serial adapter.
I´m using HTerm as terminal program and connect to my kindle (115200/8/1)
When the kindle is starting I see some output from your kindle startup in HTerm.
I´ve tried to stop autoboot by pressing a key (Hit any key to stop autoboot
but it won´t stop.
I´ve tried a lot of times but it wont stop. Here is some output (I´ve removed the serial from my pw3):
Spoiler:
Code:
info shutdown:begin:level=6,halt=,special=:
info shutdown:closing password dialog::
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:reboot
info shutdown_showimage:screen:waiting for reboot screen to come up:
info upstart_f:stopping_job:job=x:
info stored:post-stop script - Time Interval = 398::
info upstart_f:stopping_job:job=lab126:
info stored:post-stop script - cleared counters::
info stored:post-stop script - sending event to appmgrd::
info upstart_f:jobs_stopped:elapsed_ms=4930,timeout_ms=45000:
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=462870,action=stop:
info userstore:filesystem sync done::
info userstore:stop:found_bootup_flag:Found BOOTUP flag file
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=4130,timeout_ms=30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=6,halt=:
[ 467.054532] imx2-wdt imx2-wdt.0: Device shutdown: Expect reboot!
[ 467.060593] Restarting system.
U-Boot 2009.08-lab126 (Apr 15 2015 - 07:37:55)
CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 36 C, calibration data 0x59c5235f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Muscat WFO
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: **********
S/N: G090G**********
I2C: ready
DRAM: 512 MB
Using default environment
In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0x1fff0000
POST done in 111 ms
Battery voltage: 3937 mV
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2633728 Bytes = 2.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.098567]
[ 0.282976] LPDDR2 MfgId: 0x1 [Samsung]
[ 0.287056]
[ 0.287059] just text: vaddr c0150d44, va 0xc0150200 pa 0x801000c3 attr 0x6
[ 0.299609]
[ 0.299613] nmx6sl_wfi_iram: vaddr e084e000, va 0xe084e200 pa 0x904043 attr 0
x2
[ 0.308457]
[ 0.308460] mx6sl_ddr: vaddr e0856000, va 0xe0856200 pa 0x905043 attr 0x2
[ 0.316787]
[ 0.316790] mx6sl_iomux: vaddr f40e0000, va 0xf40e0200 pa 0x20110c3 attr 0x14
9
[ 0.327625]
[ 0.327629] ANATOP: vaddr f40c8000, va 0xf40c8200 pa 0x20110c3 attr 0x149
[ 0.341978]
[ 0.341981] CCM: vaddr f40c4000, va 0xf40c4200 pa 0x20110c3 attr 0x149
[ 0.354118]
[ 0.354122] MMDC_P0: vaddr f41b0000, va 0xf41b0200 pa 0x21110c3 attr 0x149
[ 0.364533]
[ 0.364536] L2: vaddr f2a02000, va 0xf2a02200 pa 0xa02043 attr 0x149
[ 0.374435]
[ 0.374439] arm perif: vaddr f2a00000, va 0xf2a00200 pa 0xa00043 attr 0x149
3.0.35-lab126 #1 PREEMPT Fri Jul 31 15:04:21 PDT 2015 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/99776 size=3269459968 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 6385648
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:6.91:49.1:
info milestone:6.97:49.2:
info milestone:7.00:49.3:
info milestone:7.04:49.4:
info milestone:7.07:49.5:
info sytem:mounted_tmpfs::
info milestone:7.13:sy50:
info system:start:time=7160:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=wario,board=muscat,rev=2,proto=Y,wifi=Y,wan=N:
info milestone:7.30:sy51:
lipc-send-event[804]: E lipc:con::Connection error(Failed to connect to socket /
var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[804]: C def:dbusi::Failed to init dbus
lipc-send-event[804]: E def:open::Failed to open LIPC
lipc-send-event[804]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending
event failed
lipc-send-event[805]: E lipc:con::Connection error(Failed to connect to socket /
var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[805]: C def:dbusi::Failed to init dbus
lipc-send-event[805]: E def:open::Failed to open LIPC
lipc-send-event[805]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending
event failed
info milestone:8.17:sy99:
info system:done:time=8210:
crond[826]: crond: crond (busybox 1.17.1) started, log level 8
iniü.exe: sshd main process (824)init.exe: sshd main process ended, respawning
init.exe: recevent pre-start process (829) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories file
system images:
warn system_cramfs_loopbacks:mountpointmissing:Image /lib/firmware/cyttsp.cramfs
.img not mounted, non existing mounting point:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted
:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounte
d:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounte
d:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:8.87:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:9.10:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:9.21:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:9.26:fs25:
info milestone:9.28:vi00:
Welcome to Kindle!
kindle login: info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info display:update:Checking '/opt/eink/images/R040_ED060KD1C1' for overrides:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:11.47:vi99:
info display:started:time=11480:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=11680,action=start:
info userstore:start:found_shutdown_flag:Found SHUTDOWN flag file
info battery:charged:cap=76,mV=3941,mAH=1068:
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:12.76:fs50:
info milestone:12.79:fs90:
info milestone:12.83:fs99:
info milestone:12.88:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:14.19:xx00:
info X:load:time=14310:
info X:xorg.conf:Generating xorg.conf:
info X:xorg.conf:xorg.conf generated:
info milestone:16.00:xx50:
info X:starting:time=16050:
info milestone:19.37:xx99:
info X:started:time=19400:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info asr_setup:winmgr_running=true. winmgr is ready::
info locale:read:lang=de_DE.utf8,lc_all=de_DE.utf8:Retrieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
info blanket_f:module already loaded:splash:
info milestone:20.60:pi00:
info milestone:20.85:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:23.77:fr00:
info milestone:23.96:fr50:
info milestone:24.02:fr51:
info framework:starting:time=26290:
info hardware:no_wan::WiFi only device. No WAN found
info board_data_file :/opt/ar6k/target/AR6003/hw2.1.1/bin/wario/muscat/wfo/AR600
3_wfo_calfile.bin::
[ 29.817047] ath6kl: ath6kl_fetch_board_file: Board calibration file fetched:
/opt/ar6k/target/AR6003/hw2.1.1/bin/wario/muscat/wfo/AR6003_wfo_calfile.bin
[ 29.915882] ath6kl: MAC from kernel xx:xx:xx:xx:xx:F0
[ 30.344009] ath6kl: host only supports scatter of :1 entries, need: 16
info milestone:56.63:fr99:
info framework:started:time=56690,delta=32690:
info blanket_f:loading blanket module:usb:
info blanket_f:unloading blanket module:splash:
info system:emiting_event:framework_ready:
debug sytem:event_emitted:framework_ready:
info stored:started::
info stored:read_in_counters:REBOOTS=0, REBOOT_LIMIT=1, RESTARTS=0, RESTART_LIMI
T=5:
info monitor:writing_file:file=/var/run/upstart/stored.restarts:
Retrieved 334 keys for system/daemon/pmond/
I also tried other terminal programs (putty, hyperterm)