MobileRead Forums - View Single Post - Firmware for Boyue books T61 - B, C and D revisions and T62

aceflor · 11-04-2015, 01:40 PM

Yes, "ROM Cooking" was needed as I could not install FOV's version on my Energy Sistem Pro+ without making some changes.

What I did :
1. Unpacked FOV's Image with RKwinTools_v135 (Google it)
2. Kept the system.img file
3. used RK Rom Dumper and Flasher for Windows (from the ROM Kitchen thread) to flash it on my device
4. The keys direction are exchanged in FOV's version and it did bother me, so I went to /system/usr/keylayout/rk29-keypad.kl, and edited it (just switched the values between keys 104 and 109) with ES Explorer.
5. And to finish it installed 160 DPI and set 160 as value (without it 212 is the minimum).

Et voilà !

11-04-2015, 01:40 PM	#23
aceflor Wizard Posts: 3,472 Karma: 48036360 Join Date: Aug 2009 Location: where the sun lives, or so they say Device: Pocketbook Era, Pocketbook Inkpad 4, Kobo Libra 2, Kindle Scribe	Yes, "ROM Cooking" was needed as I could not install FOV's version on my Energy Sistem Pro+ without making some changes. What I did : 1. Unpacked FOV's Image with RKwinTools_v135 (Google it) 2. Kept the system.img file 3. used RK Rom Dumper and Flasher for Windows (from the ROM Kitchen thread) to flash it on my device 4. The keys direction are exchanged in FOV's version and it did bother me, so I went to /system/usr/keylayout/rk29-keypad.kl, and edited it (just switched the values between keys 104 and 109) with ES Explorer. 5. And to finish it installed 160 DPI and set 160 as value (without it 212 is the minimum). Et voilà !