[amocus]

I did it! It's fixed :))

But from the beginning.
I upgraded to the latest version:

Spoiler:

Welcome to Kindle!

kindle login: root
Password:
#################################################
# N O T I C E * N O T I C E * N O T I C E #
#################################################
Rootfs is mounted read-only. Invoke mntroot rw to
switch back to a writable rootfs.
#################################################
[root@kindle root]# ls /mnt/us
diagnostic_logs system
documents update_kindle_5.6.1.1.bin
[root@kindle root]# reboot
The system is going down NOW!
Sent SIGTERM to all processes
unregistered gadget driver 'g_file_storage'
Terminated
Sent SIGKILL to all processes
Requesting system reboot
MXC Watchdog # 0 shutdown
Restarting system.
Restarting Yoshi


U-Boot 2009.08-lab126 (Mar 05 2013 - 18:22:51)

CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 800000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
Board: Celeste WFO (256 MB)
Boot Reason: [POR]
Boot Device: MMC
Board Id: AAAAAAAAAAAAAAAA
S/N: B024AAAAAAAAAAAA
DRAM: 256 MB
Using default environment

In: serial
Out: logbuff
Err: logbuff
Quick Memory Test 0x70000000, 0xfffc000
POST done in 17 ms
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 70800000 ...
Image Name: Linux-2.6.31-rt11-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4616864 Bytes = 4.4 MB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
MX50 LPDDR2 MfgID: 0x3 [Elpida]
2.6.31-rt11-lab126 #1 Mon Apr 28 12:33:59 PDT 2014 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/43712 size=1432354816 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 2797552
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
Charge: 90% [################################################## ###:::::]
update-payload.dat:1 898a5d0d2c0903643b1149c1f134be89 imx50_yoshime/uImage 37 main_kernel
128 fdbd14b1c79e12fba0ba2c9bb618955a rootfs.img.gz 1645 update_image_rootfs

update-payload.dat:EOF

imx50_yoshime/uImage 4849664 [######################################]



rootfs.img.gz 112149461 [####################:::::::::::boot: I def:rbt:reset=user_reboot,version=232331:
rootfs.img.gz 215656101 [######################################]



imx50_yoshime/uImage 4849664 [######################################]
rootfs.img.gz 215656101 [######################################]
4849664 [######################################]

=== kernel printk buffer (10291 bytes) ===
<5>Linux version 2.6.31-rt11-lab126 (jenkins-official@sjc10-jbuild09) (collect2: ld returned 1 exit status) #1 Mon Apr 28 12:33:59 PDT 2014
<4>CPU: ARMv7 Processor [412fc085] revision 5 (ARMv7), cr=10c53c7f
<4>CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>Machine: Amazon.com MX50 YOSHIME Board
<6>Board ID and Serial Number driver for Lab126 boards version 1.0
<4>MX50 Board id - AAAAAAAAAAAAAAAA
<4>Memory policy: ECC disabled, Data cache writeback
<7>On node 0 totalpages: 65536
<7>free_area_init_node: node 0, pgdat c046e89c, node_mem_map c0498000
<7> DMA zone: 192 pages used for memmap
<7> DMA zone: 0 pages reserved
<7> DMA zone: 24384 pages, LIFO batch:3
<7> Normal zone: 320 pages used for memmap
<7> Normal zone: 40640 pages, LIFO batch:7
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
<5>Kernel command line: consoleblank=0 rootwait ro ip=off root=/dev/mmcblk0p1 quiet eink=fslepdc video=mxcepdcfb:E60,bpp=8,x_mem=4M mem=256M user_debug=0x1 console=ttymxc0,115200
<4>PID hash table entries: 1024 (order: 10, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 256MB = 256MB total
<5>Memory: 255012KB available (3296K code, 359K data, 1004K init, 0K highmem)
<6>NR_IRQS:368
<6>MXC IRQ initialized
<4>cko2_set_rate, new divider=0
<6>MXC_Early serial console at MMIO 0x53fbc000 (options '115200')
<6>console [ttymxc0] enabled
<4>Console: colour dummy device 80x30
<6>Calibrating delay loop... 799.53 BogoMIPS (lpj=3997696)
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<7>regulator: core version 0.5
<6>NET: Registered protocol family 16
<6>i.MX IRAM pool: 128 KB@0xd0840000
<3>MX50 LPDDR2 MfgID: 0x3 [Elpida]
<6>CPU is i.MX50 Revision 1.1
<6>MXC GPIO hardware
<6>Using SDMA I.API
<6>MXC DMA API initialized
<4>bio: create slab <bio-0> at 0
<6>CSPI: mxc_spi-0 probed
<6>CSPI: mxc_spi-1 probed
<6>CSPI: mxc_spi-2 probed
<6>MXC I2C driver
<6>MXC I2C driver
<6>MXC I2C driver
<7>PMIC Light driver loading...
<6>mc13892 Rev 2.4 FinVer 2 detected
<7>Initializing regulators for mx50 yoshi.
<7>regulator: SW1: 600 <--> 1375 mV
<7>regulator: SW2: 900 <--> 1850 mV
<7>regulator: SW3: 900 <--> 1850 mV
<7>regulator: SW4: 1100 <--> 1850 mV
<7>regulator: SWBST: 0 mV
<7>regulator: VIOHI: 0 mV
<7>regulator: VPLL: 1050 <--> 1800 mV
<7>regulator: VDIG: 1200 mV
<7>regulator: VSD: 1800 <--> 3150 mV
<7>regulator: VUSB2: 2400 <--> 2775 mV
<7>regulator: VVIDEO: 2775 mV
<7>regulator: VAUDIO: 2300 <--> 3000 mV
<7>regulator: VCAM: 2500 <--> 3000 mV fast normal
<7>regulator: VGEN1: 3000 mV
<7>regulator: VGEN2: 1200 <--> 3150 mV
<7>regulator: VGEN3: 1800 mV
<7>regulator: VUSB: 0 mV
<7>regulator: GPO1: 0 mV
<7>regulator: GPO2: 0 mV
<7>regulator: GPO3: 0 mV
<7>regulator: GPO4: 0 mV
<7>PMIC ADC start probe
<7>PMIC Light successfully loaded
<6>Device spi3.0 probed
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>LPMode driver module loaded
<6>Static Power Management for Freescale i.MX5
<6>PM driver module loaded
<6>sdram autogating driver module loaded
<6>Bus freq driver module loaded
<6>mxc_dvfs_core_probe
<6>DVFS driver module loaded
<6>i.MXC CPU frequency driver
<6>squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>Registering unionfs 2.5.10 (for 2.6.31.14)
<6>msgmni has been set to 498
<6>alg: No test for stdrng (krng)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>regulator: DISPLAY: 0 mV
<7>regulator: GVDD: 20000 mV
<7>regulator: GVEE: -22000 mV
<7>regulator: VCOM: 0 <--> 2749 mV
<7>regulator: VNEG: -15000 mV
<7>regulator: VPOS: 15000 mV
<7>regulator: TMST: 0 mV
<6>papyrus 1-0068: PMIC PAPYRUS for eInk display
<6>Amazon MX35 Yoshi Power Button Driver
<6>Serial: MXC Internal UART driver
<6>mxcintuart.0: ttymxc0 at MMIO 0x53fbc000 (irq = 31) is a Freescale MXC
<6>console handover: boot [ttymxc0] -> real [ttymxc0]
<6>mxcintuart.1: ttymxc1 at MMIO 0x53fc0000 (irq = 32) is a Freescale MXC
<6>mxcintuart.2: ttymxc2 at MMIO 0x5000c000 (irq = 33) is a Freescale MXC
<6>mxcintuart.3: ttymxc3 at MMIO 0x53ff0000 (irq = 13) is a Freescale MXC
<6>loop: module loaded
<6>mxc_rtc mxc_rtc.0: rtc core: registered mxc_rtc as rtc0
<6>Probing mxc_rtc done
<6>mc13892 rtc probe start
<6>pmic_rtc pmic_rtc.1: rtc core: registered pmic_rtc as rtc1
<6>mc13892 rtc probe succeed
<6>i2c /dev entries driver
<6>MXC WatchDog Driver 2.0
<6>MXC Watchdog # 0 Timer: initial timeout 127 sec
<6>MXC Watchdog: Started 10000 millisecond watchdog refresh
<6>PMIC Character device: successfully loaded
<4>pmic_battery: probe of pmic_battery.1 failed with error -1
<6>sdhci: Secure Digital Host Controller Interface driver
<6>sdhci: Copyright(c) Pierre Ossman
<6>mxsdhci: MXC Secure Digital Host Controller Interface driver
<6>mxsdhci: MXC SDHCI Controller Driver.
<6>mmc0: SDHCI detect irq 273 irq 2 INTERNAL DMA
<6>mxsdhci: MXC SDHCI Controller Driver.
<6>mmc1: SDHCI detect irq 0 irq 3 INTERNAL DMA
<6>Registered led device: pmic_ledsr
<6>Registered led device: pmic_ledsg
<6>Registered led device: pmic_ledsb
<4>nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
<6>ip_tables: (C) 2000-2006 Netfilter Core Team
<6>TCP cubic registered
<6>NET: Registered protocol family 17
<6>RPC: Registered udp transport module.
<6>RPC: Registered tcp transport module.
<6>kernel: I perf:kernel:kernel_loaded=0.48 seconds:
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
<7>regulator_init_complete: disabling TMST
<7>regulator_init_complete: disabling VCOM
<7>regulator_init_complete: disabling GPO4
<7>regulator_init_complete: disabling GPO3
<7>regulator_init_complete: disabling GPO2
<7>regulator_init_complete: disabling GPO1
<7>regulator_init_complete: disabling VGEN3
<7>regulator_init_complete: disabling VGEN1
<7>regulator_init_complete: disabling VCAM
<7>regulator_init_complete: disabling VAUDIO
<7>regulator_init_complete: disabling VVIDEO
<7>regulator_init_complete: disabling VSD
<7>regulator_init_complete: disabling SWBST
<6>mxc_rtc mxc_rtc.0: setting system clock to 1970-01-01 00:05:21 UTC (321)
<6>Freeing init memory: 1004K
<6>mmc0: queuing CIS tuple 0x01 length 3
<6>mmc0: queuing CIS tuple 0x1a length 5
<6>mmc0: queuing CIS tuple 0x1b length 8
<6>mmc0: queuing CIS tuple 0x14 length 0
<6>mmc0: queuing CIS tuple 0x80 length 1
<6>mmc0: queuing CIS tuple 0x81 length 1
<6>mmc0: queuing CIS tuple 0x82 length 1
<6>mmc0: new high speed SDIO card at address 0001
<6>emmc: I def:mmcpartinfo:vendor=unknown, ddr=0, host=mmc1, manufacturer_id=254:
<6>mmc1: new high speed MMC card at address 0001
<6>mmcblk0: mmc1:0001 MMC02G 1.83 GiB
<6> mmcblk0: p1 p2 p3 p4
<4>INFO:Loaded module /lib/modules/eink_fb_waveform.ko (40028 bytes)
<4>mxc_epdc_fb_init_hw: 06_05_009e_3c_2b3401_07_db_00000d87_85_12.wbf
<4>INFO:Loaded module /lib/modules/mxc_epdc_fb.ko default_panel_hw_init=1 default_update_mode=1 (51640 bytes)
<4>INFO:eink initialized... (786432 bytes)
<4>INFO:!!! Checking MBR /dev/mmcblk0 !!!!
<4>INFO:partition 2, start sector is 782336
<4>INFO:partition 3, start sector is 913408
<4>INFO:partition 4, start sector is 1044480
<4>INFO:maximizing partition 2797568 sectors
<4>INFO:*** Partition table verified for /dev/mmcblk0 ***
<4>INFO:Setup loop device /dev/loop0 for /dev/mmcblk0p4 + 8192
<4>INFO:Checking for updates... (auto-pilot mode)
<4>INFO:Found update_kindle_5.6.1.1.bin
<4>
<4>INFO:Found bundle /mnt-us/update_kindle_5.6.1.1.bin
<4>INFO:*** NORMAL MODE
<4>*** CHECKING /mnt-us/update_kindle_5.6.1.1.bin ***
<4>INFO:do_unbundle: filename=/mnt-us/update_kindle_5.6.1.1.bin, new_file=0x00014f14
<4>INFO:Device code matched (24).
<4>INFO:Signed with official 2K cert.
<4>INFO:Verifying signature (len: 256)
<4>ERROR: signature is not the correct length (128 bytes versus 256 bytes)
<4>INFO:Signature check succeeded.
<4>IGNORING FILE: update-payload.dat
<4>INFO:Total progress is 2%
<4>CHK: imx50_yoshime/uImage hash for UImage:
<4>MD5: 898a5d0d2c0903643b1149c1f134be89
<4>SHA256: 31542b2bf5115235d526f61ab142cdf9a793520788d3ca2546 61b0dbcf5c11ec
<4>SIGNATURE FILE: imx50_yoshime/uImage.sig
<4>INFO:Total progress is 2%
<4>INFO:imx50_yoshime/uImage.sig:sig_len=256
<4>mxc_rtc: saved=0x132 boot=0x165
<3>boot: I def:rbt:reset=user_reboot,version=232331:
<4>INFO:Total progress is 12%
<4>CHK: rootfs.img.gz hash for RootFS:
<4>MD5: fdbd14b1c79e12fba0ba2c9bb618955a
<4>SHA256: a6331a39f1df1906fb9f6beb7686d664ac0e236e075ba67596 1ccfa88cf3650f
<4>SIGNATURE FILE: rootfs.img.gz.sig
<4>INFO:Total progress is 12%
<4>INFO:rootfs.img.gz.sig:sig_len=256
<4>SIGNATURE FILE: update-payload.dat.sig
<4>IGNORING SIGNATURE FILE: update-payload.dat.sig
<4>INFO:*** bundle sizes: UImage[4849664 / 14680064], RootFS[366739456 / 367001600], UBoot[0 / 385024], DiagsFS[0 / 67108864], Diags Kernel[0 / 14680064], Userdata[0 / 1208025088]
<4>ERROR: signature is not the correct length (128 bytes versus 256 bytes)
<4>INFO:UImage:Present siglen=256 sigpassed=Yes
<4>ERROR: signature is not the correct length (128 bytes versus 256 bytes)
<4>INFO:RootFS:Present siglen=256 sigpassed=Yes
<4>INFO:UBoot:missing
<4>INFO:DiagsFS:missing
<4>INFO:Diags Kernel:missing
<4>INFO:Userdata:missing
<4>*** UPDATING /mnt-us/update_kindle_5.6.1.1.bin (Attempt #1) ***
<4>INFO:do_unbundle: filename=/mnt-us/update_kindle_5.6.1.1.bin, new_file=0x000153bc
<4>INFO:Updating imx50_yoshime/uImage
<4>INFO:Total progress is 14%
<4>INFO:imx50_yoshime/uImage update successful
<4>INFO:Total progress is 81%
<4>INFO:rootfs.img.gz update successful
<4>INFO:Installation had uImage. Installing it.
<4>INFO:Copying /uImage to /dev/mmcblk0 ...
<4>INFO:No uboot image found! skipping uboot installation.
<4>INFO:removing /mnt-us/update_kindle_5.6.1.1.bin
<4>INFO:bundle /mnt-us/update_kindle_5.6.1.1.bin was successful
<4>INFO:Rebooting ...
<6>Device spi2.0 removed

=== END ===
Restarting system.
Restarting Yoshi

Nothing changed -after upgrade it rebooted and showed Repair Needed:

Spoiler:

U-Boot 2009.08-lab126 (Mar 05 2013 - 18:22:51)

CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 800000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
Board: Celeste WFO (256 MB)
Boot Reason: [POR]
Boot Device: MMC
Board Id: AAAAAAAAAAAAAAAA
S/N: B024AAAAAAAAAAAA
DRAM: 256 MB
Using default environment

In: serial
Out: logbuff
Err: logbuff
Quick Memory Test 0x70000000, 0xfffc000
POST done in 17 ms
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 70800000 ...
Image Name: Linux-2.6.31-rt11-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4748160 Bytes = 4.5 MB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
MX50 LPDDR2 MfgID: 0x3 [Elpida]
2.6.31-rt11-lab126 #1 Tue Jun 23 04:29:16 PDT 2015 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/43712 size=1432354816 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 2797552
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
argc == 12
argv[0]: "kinit"
argv[1]: "consoleblank=0"
argv[2]: "rootwait"
argv[3]: "ro"
argv[4]: "ip=off"
argv[5]: "root=/dev/mmcblk0p1"
argv[6]: "quiet"
argv[7]: "eink=fslepdc"
argv[8]: "video=mxcepdcfb:E60,bpp=8,x_mem=4M"
argv[9]: "mem=256M"
argv[10]: "user_debug=0x1"
argv[11]: "console=ttymxc0,115200"
argc == 4
argv[0]: "IP-Config"
argv[1]: "-i"
argv[2]: "Linux kinit"
argv[3]: "ip=off"
IP-Config: no devices to configure
kinit: do_mounts
kinit: name_to_dev_t(/dev/mmcblk0p1) = dev(179,1)
kinit: root_dev = dev(179,1)
kinit: /dev/root appears to be a ext3 filesystem
kinit: trying to mount /dev/root on /root with type ext3
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info firsttime:mount_rw:time=5470:Mounting root RW for first boot
info firsttime:lostfound:Removing lost+found:
info firsttime:mtab:Linking /var/tmp:
info firsttime:mtab:Linking Kindle Registry:
info firsttime:xorgconf:Linking xorg.conf:
info firsttime:cursor:Linking Xorg cursor:
info firsttime:mount_ro:time=8109:Mounting root RO
info system:mounted_dev::
info milestone:8.17:49.1:
info milestone:8.23:49.2:
info milestone:8.26:49.3:
info milestone:8.31:49.4:
info milestone:8.36:49.5:
info sytem:mounted_tmpfs::
info milestone:8.44:sy50:
info system:start:time=8470:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=yoshime3,board=celeste,rev= 22,proto=Y,wifi=Y,wan=N:
info milestone:8.68:sy51:
lipc-send-event[567]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[567]: C def:dbusi::Failed to init dbus
lipc-send-event[567]: E def:open::Failed to open LIPC
lipc-send-event[567]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[566]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[566]: C def:dbusi::Failed to init dbus
lipc-send-event[566]: E def:open::Failed to open LIPC
lipc-send-event[566]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:9.42:sy99:
info system:done:time=9450:
crond[605]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: sshd main process (603) terminated with status 2
init.exe: sshd main process ended, respawning
init.exe: recevent pre-start process (608) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
info system_cramfs_loopbacks:mounted:Image /lib/firmware/cyttsp.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:10.45:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:



Welcome to Kindle!

kindle login: info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:11.06:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info filesystems_var_local:guid:Generating guid:
info filesystems_var_local:certman:Creating certman directory:
info filesystems_var_local:certman:Prepaing initial version of CRL database:
info milestone:11.58:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info filesystems_var_local:xfsn-deprecate:start:
info milestone:11.73:vi00:
info filesystems_var_local:xfsn-deprecate:done:
info milestone:11.99:fs25:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:14.30:vi99:
info display:started:time=14320:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=15050,action=start:
info battery:charged:cap=90,mV=4079,mAH=1155:
info userstore:start:found_bootup_flag:Found BOOTUP flag file
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:16.41:fs50:
info milestone:16.44:fs90:
info milestone:16.48:fs99:
info milestone:16.53:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:18.85:xx00:
info X:load:time=19040:
info X:xorg.conf:Generating xorg.conf:
info X:makexconfig:Celeste Input device detection status:
info X:makexconfig:Touch device: OK:
info X:makexconfig:Accelerometer device: N/A !!:
info X:xorg.conf:xorg.conf generated:
info milestone:20.93:xx50:
info X:starting:time=21010:
info milestone:25.98:xx99:
info X:started:time=26030:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_US.utf8,lc_all=en_US.utf8:Retr ieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
crit lab126_gui:reboots=2,max=2:shutting down and showing customer service page:
info shutdown:begin:level=0,halt=1,special=cust_service :
info shutdown:closing password dialog::
info log_var_local_folder_sizes:printing varlocal folder sizes:0 /var/local/IN_REPAIR_SCREEN:
info log_var_local_folder_sizes:printing varlocal folder sizes:218.0K /var/local/appreg.db:
info log_var_local_folder_sizes:printing varlocal folder sizes:0 /var/local/appregdbupgrade:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/archive:
info log_var_local_folder_sizes:printing varlocal folder sizes:67.0K /var/local/blanket:
info log_var_local_folder_sizes:printing varlocal folder sizes:827.0K /var/local/certman:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.6M /var/local/eink:
info log_var_local_folder_sizes:printing varlocal folder sizes:15.0K /var/local/firstReboot.gz:
info log_var_local_folder_sizes:printing varlocal folder sizes:3.0K /var/local/font:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/guid:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/halt_reason:
info log_var_local_folder_sizes:printing varlocal folder sizes:603.0K /var/local/java:
info log_var_local_folder_sizes:printing varlocal folder sizes:57.0K /var/local/log:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/logLevel.conf:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.7M /var/local/mesquite:
info log_var_local_folder_sizes:printing varlocal folder sizes:191.0K /var/local/reg:
info log_var_local_folder_sizes:printing varlocal folder sizes:80.0K /var/local/system:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/tmd:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/todo:
info log_var_local_folder_sizes:printing varlocal folder sizes:1.0K /var/local/upstart:
info log_var_local_folder_sizes:printing varlocal folder sizes:2.0K /var/local/xorg.conf:
info log_df_h:printing df -h:Filesystem Size Used Available Use% Mounted on:
info log_df_h:printing df -h:/dev/root 348.1M 298.5M 42.6M 88% /:
info log_df_h:printing df -h:tmpfs 125.1M 60.0K 125.0M 0% /dev:
info log_df_h:printing df -h:tmpfs 125.1M 0 125.1M 0% /dev/shm:
info log_df_h:printing df -h:tmpfs 32.0M 292.0K 31.7M 1% /var:
info log_df_h:printing df -h:/dev/loop/2 216.0K 216.0K 0 100% /lib/firmware/cyttsp:
info log_df_h:printing df -h:/dev/loop/3 2.5M 2.5M 0 100% /usr/share/X11/xkb:
info log_df_h:printing df -h:/dev/loop/4 103.1M 103.1M 0 100% /usr/java/lib/fonts:
info log_df_h:printing df -h:/dev/loop/5 1.4M 1.4M 0 100% /etc/kdb.src:
info log_df_h:printing df -h:/dev/loop/6 9.1M 9.1M 0 100% /usr/lib/locale:
info log_df_h:printing df -h:/dev/loop/7 22.1M 22.1M 0 100% /usr/share/keyboard:
info log_df_h:printing df -h:/dev/mmcblk0p3 62.0M 11.6M 47.2M 20% /var/local:
info log_df_h:printing df -h:/dev/loop/0 1.3G 488.0K 1.3G 0% /mnt/base-us:
info log_df_h:printing df -h:fsp 1.3G 488.0K 1.3G 0% /mnt/us:
info log_version_txt:printing /etc/version.txt:System Software Version: 035-juno_6011_celeste_yoshime3-268989:
info log_version_txt:printing /etc/version.txt:Tue Jun 23 04:35:04 PDT 2015:
info log_version_txt:printing /etc/version.txt:com.lab126.eink.celeste.os:
crit shutdown:Entering repair screen:uploading logs ...:
boot: I def:rbt:reset=user_reboot,version=268989:
info hardware:no_wan::WiFi only device. No WAN found
info board_data_file :/opt/ar6k/target/AR6003/hw2.1.1/bin/yoshime3/celeste/wfo/AR6003_wfo_calfile.bin::
info wifim:enablediv:enabling antenna diversity for wifi...:
MAC from kernel xx:xx:xx:xx:xx:F2
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:cust_service
info shutdown_showimage:screen:waiting for cust_service screen to come up:
info upstart_f:stopping_job:job=x:
info upstart_f:stopping_job:job=lab126:
Reset Cause readback: 0x2
info upstart_f:jobs_stopped:elapsed_ms=5200,timeout_ms= 45000:
info shutdown:cust_service:starting:
info ss_cust_service:nothing to do for this shutdown mode:"cust_service":
info ss_cust_service:completed successfully::
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=50770,action=stop:
info userstore:filesystem sync done::
info userstore:stop:found_bootup_flag:Found BOOTUP flag file
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=6880,timeout_ms= 30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=0,halt=1:
System halted.
Halting ...

But I saw there was

crit lab126_gui:reboots=2,max=2:shutting down and showing customer service page:

So I rebooted device, logged in, typed

[root@kindle root]# echo 0 > /var/local/upstart/lab126_gui.restarts
[root@kindle root]# touch /mnt/us/DO_FACTORY_RESTORE
[root@kindle root]# ls /mnt/us
DO_FACTORY_RESTORE documents
diagnostic_logs system
[root@kindle root]# reboot

It booted, asked for language and is ready for use!!

Spoiler:

The system is going down NOW!
Sent SIGTERM to all processes
unregistered gadget driver 'g_file_storage'
Terminated
Sent SIGKILL to all processes
Requesting system reboot
MXC Watchdog # 0 shutdown
Restarting system.
Restarting Yoshi


U-Boot 2009.08-lab126 (Mar 05 2013 - 18:22:51)

CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 800000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
Board: Celeste WFO (256 MB)
Boot Reason: [POR]
Boot Device: MMC
Board Id: AAAAAAAAAAAAAAAA
S/N: B024AAAAAAAAAAAA
DRAM: 256 MB
Using default environment

In: serial
Out: logbuff
Err: logbuff
Quick Memory Test 0x70000000, 0xfffc000
POST done in 16 ms
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 70800000 ...
Image Name: Linux-2.6.31-rt11-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4748160 Bytes = 4.5 MB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
MX50 LPDDR2 MfgID: 0x3 [Elpida]
2.6.31-rt11-lab126 #1 Tue Jun 23 04:29:16 PDT 2015 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/43712 size=1432354816 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 2797552
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
argc == 12
argv[0]: "kinit"
argv[1]: "consoleblank=0"
argv[2]: "rootwait"
argv[3]: "ro"
argv[4]: "ip=off"
argv[5]: "root=/dev/mmcblk0p1"
argv[6]: "quiet"
argv[7]: "eink=fslepdc"
argv[8]: "video=mxcepdcfb:E60,bpp=8,x_mem=4M"
argv[9]: "mem=256M"
argv[10]: "user_debug=0x1"
argv[11]: "console=ttymxc0,115200"
argc == 4
argv[0]: "IP-Config"
argv[1]: "-i"
argv[2]: "Linux kinit"
argv[3]: "ip=off"
IP-Config: no devices to configure
kinit: do_mounts
kinit: name_to_dev_t(/dev/mmcblk0p1) = dev(179,1)
kinit: root_dev = dev(179,1)
kinit: /dev/root appears to be a ext3 filesystem
kinit: trying to mount /dev/root on /root with type ext3
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:5.54:49.1:
info milestone:5.60:49.2:
info milestone:5.63:49.3:
info milestone:5.68:49.4:
info milestone:5.73:49.5:
info sytem:mounted_tmpfs::
info milestone:5.81:sy50:
info system:start:time=5840:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=yoshime3,board=celeste,rev= 22,proto=Y,wifi=Y,wan=N:
info milestone:6.05:sy51:
lipc-send-event[550]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[550]: C def:dbusi::Failed to init dbus
lipc-send-event[550]: E def:open::Failed to open LIPC
lipc-send-event[550]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[553]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[553]: C def:dbusi::Failed to init dbus
lipc-send-event[553]: E def:open::Failed to open LIPC
lipc-send-event[553]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:6.80:sy99:
info system:done:time=6830:
crond[586]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: sshd main process (5init.exe: sshd main process▒init.exe: recevent pre-start process (589) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
info system_cramfs_loopbacks:mounted:Image /lib/firmware/cyttsp.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:7.83:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:



Welcome to Kindle!

kindle login: info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:8.42:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:8.94:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:9.02:fs25:
info milestone:9.05:vi00:
info prereg:PRAGMA_QUICK_CHECK_PASSED::sts=0
info milestone:9.63:vi99:
info display:started:time=9650:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info battery:charged:cap=89,mV=4082,mAH=1152:
info userstore:run:time=9890,action=start:
info system:emiting_event:battery_ready:
info userstore:start:found_bootup_flag:Found BOOTUP flag file
debug sytem:event_emitted:battery_ready:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:11.07:fs50:
info milestone:11.11:fs90:
info milestone:11.15:fs99:
info milestone:11.19:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:13.65:xx00:
info shutdown:begin:level=6,halt=0,special=factory_rese t:
info X:load:time=13890:
info shutdown:closing password dialog::
info X:xorg.conf:Generating xorg.conf:
warn shutdown_showimage:x/blanket is not running:screen not updated:
warn shutdown:splash image not displayed::
info upstart_f:stopping_job:job=x:
info X:makexconfig:Celeste Input device detection status:
info X:makexconfig:Touch device: OK:
info X:makexconfig:Accelerometer device: N/A !!:
info X:xorg.conf:xorg.conf generated:
info milestone:16.31:xx50:
info X:starting:time=16379:
info upstart_f:stopping_job:job=lab126:
info upstart_f:jobs_stopped:elapsed_ms=4190,timeout_ms= 45000:
info shutdown:factory_reset:starting:
info hardware:no_wan::WiFi only device. No WAN found
info ss_factory_reset:cleaning misc files::
info ss_factory_reset:erasing waveforms::
info upstart_f:stopping_job:job=filesystems:
info filesystems_var_local:unmounting font files::
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=25550,action=stop:
info userstore:filesystem sync done::
info userstore:stop:found_bootup_flag:Found BOOTUP flag file
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
boot: I def:rbt:reset=user_reboot,version=268989:
info upstart_f:jobs_stopped:elapsed_ms=5070,timeout_ms= 30000:
info ss_factory_reset:erasing partition:name="userstore" partition=/dev/mmcblk0p4:secure erase from 1044480 of 2797568 sectors
crit ss_factory_reset:failed to erase partition:name="userstore" partition=/dev/mmcblk0p4:secure erase exited with code 1
info ss_factory_reset:erasing partition:name="/mnt/base-us" partition=/dev/mmcblk0p4:overwriting first 4096 of 1398784 blocks
info ss_factory_reset:partition erased successfully:name="/mnt/base-us" partition=/dev/mmcblk0p4:
info ss_factory_reset:erasing partition:name="/var/local" partition=/dev/mmcblk0p3:overwriting first 4096 of 65536 blocks
info ss_factory_reset:partition erased successfully:name="/var/local" partition=/dev/mmcblk0p3:
info ss_factory_reset:marking system factory-fresh::
info ss_factory_reset:marking system no_transitions for volumd and powerd::
info ss_factory_reset:marking system factory-fresh-authentication::
info ss_factory_reset:completed successfully::
info upstart_f:job_already_stopped:job=filesystems:
info upstart_f:jobs_stopped:elapsed_ms=0,timeout_ms=300 00:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=6,halt=0:
Restarting system.
Restarting Yoshi


U-Boot 2009.08-lab126 (Mar 05 2013 - 18:22:51)

CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 800000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
Board: Celeste WFO (256 MB)
Boot Reason: [POR]
Boot Device: MMC
Board Id: AAAAAAAAAAAAAAAA
S/N: B024AAAAAAAAAAAA
DRAM: 256 MB
Using default environment

In: serial
Out: logbuff
Err: logbuff
Quick Memory Test 0x70000000, 0xfffc000
POST done in 17 ms
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 70800000 ...
Image Name: Linux-2.6.31-rt11-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4748160 Bytes = 4.5 MB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
MX50 LPDDR2 MfgID: 0x3 [Elpida]
2.6.31-rt11-lab126 #1 Tue Jun 23 04:29:16 PDT 2015 armv7l
FAT: bogus number of reserved sectors
Using 25C-only waveform!
Press [ENTER] for recovery menu... 0 /BOOTING DEFAULT.
argc == 12
argv[0]: "kinit"
argv[1]: "consoleblank=0"
argv[2]: "rootwait"
argv[3]: "ro"
argv[4]: "ip=off"
argv[5]: "root=/dev/mmcblk0p1"
argv[6]: "quiet"
argv[7]: "eink=fslepdc"
argv[8]: "video=mxcepdcfb:E60,bpp=8,x_mem=4M"
argv[9]: "mem=256M"
argv[10]: "user_debug=0x1"
argv[11]: "console=ttymxc0,115200"
argc == 4
argv[0]: "IP-Config"
argv[1]: "-i"
argv[2]: "Linux kinit"
argv[3]: "ip=off"
IP-Config: no devices to configure
kinit: do_mounts
kinit: name_to_dev_t(/dev/mmcblk0p1) = dev(179,1)
kinit: root_dev = dev(179,1)
kinit: /dev/root appears to be a ext3 filesystem
kinit: trying to mount /dev/root on /root with type ext3
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:5.42:49.1:
info milestone:5.48:49.2:
info milestone:5.51:49.3:
info milestone:5.57:49.4:
info milestone:5.62:49.5:
info sytem:mounted_tmpfs::
info milestone:5.70:sy50:
info system:start:time=5730:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=yoshime3,board=celeste,rev= 22,proto=Y,wifi=Y,wan=N:
info milestone:5.94:sy51:
lipc-send-event[559]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[559]: C def:dbusi::Failed to init dbus
lipc-send-event[559]: E def:open::Failed to open LIPC
lipc-send-event[559]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[556]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[556]: C def:dbusi::Failed to init dbus
lipc-send-event[556]: E def:open::Failed to open LIPC
lipc-send-event[556]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:6.73:sy99:
info system:done:time=6760:
crond[598]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: sshd main process (596) terminated with status 2
init.exe: sshd main process ended, respawning
init.exe: recevent pre-start process (601) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
info system_cramfs_loopbacks:mounted:Image /lib/firmware/cyttsp.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:7.78:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:



Welcome to Kindle!

kindle login: info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:8.30:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loadedVFS: Can't find ext3 filesystem on dev mmcblk0p3.
_fakekey:
info filesystems_var_local:createvarlocal:Creating /var/local filesystem:
info filesystems_var_local:notransitionsexists:file=/var/local/system/no_transitions:Already exists
info filesystems_var_local:createvarlocalfirstboot:file =/var/local/system/localvar_firstboot:Creating var local first boot file
info milestone:14.69:fs23:
info system:emiting_event:migrate_DB:
debug sytem:event_emitted:migrate_DB:
info filesystems_var_local:createvarlocaldbupgrade:file =/var/local/system/LOCALVAR_DBUPGRADE:Creating var local db upgrade file
info filesystems_var_local:xfsn-deprecate:start:
info milestone:14.80:mdb1:
info milestone:14.82:mdb2:
info DB_MIGRATION:Moving cc db to tmpfs::
info filesystems_var_local:xfsn-deprecate:done:
info milestone:14.93:mdb5:
info milestone:14.95:fs25:
info milestone:14.97:mdb25:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:15.14:vi00:
i2c-adapter i2c-2: E mxc_i2c_wait_for_tc:tx_success_fail::ACK not received
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info display:update:Creating panel directory:
FAT: bogus number of reserved sectors
info display:update:Creating waveform proxy from /var/local/eink/waveforms/06_05_009e_3c_2b3401_07_db_00000d87_85_12.wrf at /mnt/wfm/waveform_to_use:
boot: I def:rbt:reset=user_reboot,version=268989:
info display:update:Displaying splash screen:
info milestone:33.51:vi99:
info display:started:time=33520:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=33760,action=start:
info battery:charged:cap=89,mV=4082,mAH=1149:
info system:emiting_event:battery_ready:
info userstore:mntus.param_not_found::mntus.param not found, initializing volume
info userstore:check_us::checking userstore filesystem
debug sytem:event_emitted:battery_ready:
info mntus:fs_error_recover::File system errors recovered
info userstore:create_default::creating userstore system and documents directories I
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:43.52:fs50:
info milestone:43.56:fs90:
info milestone:43.60:fs99:
info milestone:43.64:sys99:
info system:emiting_event:devcap_ready:
debug sytem:event_emitted:devcap_ready:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:45.79:xx00:
info X:load:time=45980:
info X:xorg.conf:Generating xorg.conf:
info X:makexconfig:Celeste Input device detection status:
info X:makexconfig:Touch device: OK:
info X:makexconfig:Accelerometer device: N/A !!:
info X:xorg.conf:xorg.conf generated:
info milestone:47.81:xx50:
info X:starting:time=47860:
info milestone:53.13:xx99:
info X:started:time=53190:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:pick::Picking Language
info locale:wait::
info hardware:no_wan::WiFi only device. No WAN found
info board_data_file :/opt/ar6k/target/AR6003/hw2.1.1/bin/yoshime3/celeste/wfo/AR6003_wfo_calfile.bin::
info wifim:enablediv:enabling antenna diversity for wifi...:
MAC from kernel xx:xx:xx:xx:xx:F2
info locale:set::User Picked Language
info locale:read:lang=pt_BR.utf8,lc_all=pt_BR.utf8:Set Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
info blanket_f:module already loaded:splash:
info milestone:81.35:pi00:
info milestone:81.60:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:87.97:fr00:
info milestone:88.19:fr50:
info milestone:88.24:fr51:
info framework:starting:time=89620:
info milestone:140.61:fr99:
info framework:started:time=140670,delta=52470:
info blanket_f:loading blanket module:usb:
info blanket_f:unloading blanket module:splash:
info system:emiting_event:framework_ready:
debug sytem:event_emitted:framework_ready:
info stored:started::
info stored:read_in_counters:REBOOTS=0, REBOOT_LIMIT=1, RESTARTS=0, RESTART_LIMIT=5:
info monitor:writing_file:file=/var/run/upstart/stored.restarts:
Retrieved 278 keys for system/daemon/pmond/

I tried to document everything - maybe it will be helpfull for someone else.
Cheers, thanks for help!