OK, I zeroed restart counter, deleted /var/local/* and even put DO_FACTORY_RESTORE file on /mnt/us/
It just try to load 3 or 4 times and ends up on Repair Needed screen :(
When I did DO_FACTORY_RESTORE it asked me for language and later rebooted 3 or 4 times just like without DO_FACTORY_RESTORE.
I had some problems with serial connection, but whole restoring/reloading procedure repeated few times so log should be OK.
I also hid my SN and Board ID.
Any idea what should I do next? Should I upload some firmware and try to upgrade my Kindle?
Quote:
|
Any chance it is in the process of updating to the 5.6.x firmware series?
|
I don't know.
Spoiler:
kindle login: root
Password:
#################################################
# N O T I C E * N O T I C E * N O T I C E #
#################################################
Rootfs is mounted read-only. Invoke mntroot rw to
switch back to a writable rootfs.
#################################################
[root@kindle root]# echo 0 > /var/local/upstart/lab126_gui.restarts
[root@kindle root]# ls /var/local
appreg.db eink log system
appregdbupgrade firstReboot.gz logLevel.conf upstart
archive font mesquite xorg.conf
blanket java reg
[root@kindle root]# rm -r /var/local
rm: can't remove '/var/local': Device or resource busy
[root@kindle root]# ls /var/local
[root@kindle root]# cd /mnt/us
[root@kindle us]# ls
diagnostic_logs documents system
[root@kindle us]# cd documents/
[root@kindle documents]# ls
Kindle_Users_Guide.azw3 dictionaries
[root@kindle documents]# cd ..
[root@kindle us]# touch DO_FACTORY_RESTORE
[root@kindle us]# ls
DO_FACTORY_RESTORE documents
diagnostic_logs system
[root@kindle us]# reboot
The system is going down NOW!
Sent SIGTERM to all processes
unregistered gadget driver 'g_file_storage'
Terminated
Sent SIGKILL to all processes
Requesting system reboot
MXC Watchdog # 0 shutdown
Restarting system.
Restarting Yoshi
U-Boot 2009.08-lab126 (Mar 05 2013 - 18:22:51)
CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 800000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
Board: Celeste WFO (256 MB)
Boot Reason: [POR]
Boot Device: MMC
Board Id: AAAAAAAAAAAAAAAA
S/N: B024AAAAAAAAAAAA
DRAM: 256 MB
Using default environment
In: serial
Out: logbuff
Err: logbuff
Quick Memory Test 0x70000000, 0xfffc000
POST done in 17 ms
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 70800000 ...
Image Name: Linux-2.6.31-rt11-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4616864 Bytes = 4.4 MB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
MX50 LPDDR2 MfgID: 0x3 [Elpida]
2.6.31-rt11-lab126 #1 Mon Apr 28 12:33:59 PDT 2014 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/43712 size=1432354816 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 2797552
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
argc == 12
argv[0]: "kinit"
argv[1]: "consoleblank=0"
argv[2]: "rootwait"
argv[3]: "ro"
argv[4]: "ip=off"
argv[5]: "root=/dev/mmcblk0p1"
argv[6]: "quiet"
argv[7]: "eink=fslepdc"
argv[8]: "video=mxcepdcfb:E60,bpp=8,x_mem=4M"
argv[9]: "mem=256M"
argv[10]: "user_debug=0x1"
argv[11]: "console=ttymxc0,115200"
argc == 4
argv[0]: "IP-Config"
argv[1]: "-i"
argv[2]: "Linux kinit"
argv[3]: "ip=off"
IP-Config: no devices to configure
kinit: do_mounts
kinit: name_to_dev_t(/dev/mmcblk0p1) = dev(179,1)
kinit: root_dev = dev(179,1)
kinit: /dev/root appears to be a ext3 filesystem
kinit: trying to mount /dev/root on /root with type ext3
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:5.53:49.1:
info milestone:5.59:49.2:
info milestone:5.62:49.3:
info milestone:5.67:49.4:
info milestone:5.72:49.5:
info sytem:mounted_tmpfs::
info milestone:5.80:sy50:
info system:start:time=5830:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=yoshime3,board=celeste,rev= 22,proto=Y,wifi=Y,wan=N:
info milestone:6.02:sy51:
lipc-send-event[561]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[561]: C def:dbusi::Failed to init dbus
lipc-send-event[561]: E def:open::Failed to open LIPC
lipc-send-event[561]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[558]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[558]: C def:dbusi::Failed to init dbus
lipc-send-event[558]: E def:open::Failed to open LIPC
lipc-send-event[558]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:6.80:sy99:
info system:done:time=6830:
init.exe: Failed to spawn sshd main process: unable to execute: No such file or directory
crond[599]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: recevent pre-start process (602) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
info system_cramfs_loopbacks:mounted:Image /lib/firmware/cyttsp.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:7.79:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
Welcome to Kindle!
kindle login: info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
debug sytem:event_emitted:loaded_ppp_async:
info milestone:8.29:fs00:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info filesystems_var_local:createnotransitions:file=/var/local/system/no_transitions:Creating no transitions file
info filesystems_var_local:createvarlocalfirstboot:file =/var/local/system/localvar_firstboot:Creating var local first boot file
info milestone:9.43:fs23:
info system:emiting_event:migrate_DB:
debug sytem:event_emitted:migrate_DB:
info filesystems_var_local:createvarlocaldbupgrade:file =/var/local/system/LOCALVAR_DBUPGRADE:Creating var local db upgrade file
info milestone:9.52:fs25:
info milestone:9.52:mdb1:
info milestone:9.57:mdb2:
info DB_MIGRATION:Moving cc db to tmpfs::
info milestone:9.64:mdb5:
info milestone:9.66:mdb25:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:9.76:vi00:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info display:update:Creating panel directory:
info display:update:Creating waveform proxy from /var/local/eink/waveforms/06_05_009e_3c_2b3401_07_db_00000d87_85_12.wrf at /mnt/wfm/waveform_to_use:
info display:update:Displaying splash screen:
info milestone:23.39:vi99:
info display:started:time=23410:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=23650,action=start:
info userstore:mntus.param_not_found::mntus.param not found, initializing volume
info battery:charged:cap=92,mV=4111,mAH=1190:
info userstore:check_us::checking userstore filesystem
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info userstore:create_default::creating userstore system and documents directories I
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:25.20:fs50:
info milestone:25.24:fs90:
info milestone:25.27:fs99:
info milestone:25.31:sys99:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:26.83:xx00:
info X:load:time=26970:
info shutdown:begin:level=6,halt=0,special=factory_rese t:
info X:xorg.conf:Generating xorg.conf:
info shutdown:closing password dialog::
warn shutdown_showimage:x/blanket is not running:screen not updated:
warn shutdown:splash image not displayed::
info upstart_f:stopping_job:job=lab126:
info X:makexconfig:Celeste Input device detection status:
info X:makexconfig:Touch device: OK:
info X:makexconfig:Accelerometer device: N/A !!:
info X:xorg.conf:xorg.conf generated:
info milestone:28.93:xx50:
info X:starting:time=29010:
info upstart_f:stopping_job:job=x:
info upstart_f:jobs_stopped:elapsed_ms=0,timeout_ms=450 00:
info shutdown:factory_reset:starting:
info ss_factory_reset:userstore pruning begin::
info ss_factory_reset:userstore pruning - deleting gray list ::
info ss_factory_reset:userstore pruning complete::
info hardware:no_wan::WiFi only device. No WAN found
info ss_factory_reset:cleaning misc files::
info ss_factory_reset:erasing waveforms::
boot: I def:rbt:reset=user_reboot,version=232331:
info upstart_f:stopping_job:job=filesystems:
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:unmounting font files::
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=34870,action=stop:
info userstore:filesystem sync done::
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=4320,timeout_ms= 30000:
info ss_factory_reset:erasing partition:name="/var/local" partition=/dev/mmcblk0p3:overwriting first 4096 of 65536 blocks
info ss_factory_reset:partition erased successfully:name="/var/local" partition=/dev/mmcblk0p3:
info ss_factory_reset:marking system factory-fresh::
info ss_factory_reset:marking system no_transitions for volumd and powerd::
info ss_factory_reset:marking system factory-fresh-authentication::
info ss_factory_reset:completed successfully::
info upstart_f:job_already_stopped:job=filesystems:
info upstart_f:jobs_stopped:elapsed_ms=0,timeout_ms=300 00:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=6,halt=0:
mxc_epdc_fb mxc_epdc_fb: EPDC not active.Update request abort.
Restarting system.
Restarting Yoshi
U-Boot 2009.08-lab126 (Mar 05 2013 - 18:22:51)
CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 800000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
Board: Celeste WFO (256 MB)
Boot Reason: [POR]
Boot Device: MMC
Board Id: AAAAAAAAAAAAAAAA
S/N: B024AAAAAAAAAAAA
DRAM: 256 MB
Using default environment
In: serial
Out: logbuff
Err: logbuff
Quick Memory Test 0x70000000, 0xfffc000
POST done in 17 ms
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 70800000 ...
Image Name: Linux-2.6.31-rt11-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4616864 Bytes = 4.4 MB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
MX50 LPDDR2 MfgID: 0x3 [Elpida]
2.6.31-rt11-lab126 #1 Mon Apr 28 12:33:59 PDT 2014 armv7l
FAT: bogus number of reserved sectors
Using 25C-only waveform!
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/43712 size=1432354816 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 2797552
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
argc == 12
argv[0]: "kinit"
argv[1]: "consoleblank=0"
argv[2]: "rootwait"
argv[3]: "ro"
argv[4]: "ip=off"
argv[5]: "root=/dev/mmcblk0p1"
argv[6]: "quiet"
argv[7]: "eink=fslepdc"
argv[8]: "video=mxcepdcfb:E60,bpp=8,x_mem=4M"
argv[9]: "mem=256M"
argv[10]: "user_debug=0x1"
argv[11]: "console=ttymxc0,115200"
argc == 4
argv[0]: "IP-Config"
argv[1]: "-i"
argv[2]: "Linux kinit"
argv[3]: "ip=off"
IP-Config: no devices to configure
kinit: do_mounts
kinit: name_to_dev_t(/dev/mmcblk0p1) = dev(179,1)
kinit: root_dev = dev(179,1)
kinit: /dev/root appears to be a ext3 filesystem
kinit: trying to mount /dev/root on /root with type ext3
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:5.46:49.1:
info milestone:5.52:49.2:
info milestone:5.55:49.3:
info milestone:5.60:49.4:
info milestone:5.65:49.5:
info sytem:mounted_tmpfs::
info milestone:5.73:sy50:
info system:start:time=5760:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=yoshime3,board=celeste,rev= 22,proto=Y,wifi=Y,wan=N:
info milestone:5.95:sy51:
lipc-send-event[550]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[550]: C def:dbusi::Failed to init dbus
lipc-send-event[550]: E def:open::Failed to open LIPC
lipc-send-event[550]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[544]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[544]: C def:dbusi::Failed to init dbus
lipc-send-event[544]: E def:open::Failed to open LIPC
lipc-send-event[544]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:6.67:sy99:
info system:done:time=6700:
init.exe: Failed to spawn sshd main process: unable to execute: No such file or directory
crond[586]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: recevent pre-start process (589) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
info system_cramfs_loopbacks:mounted:Image /lib/firmware/cyttsp.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:7.67:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
Welcome to Kindle!
kindle login: info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
debug sytem:event_emitted:loaded_ppp_async:
info milestone:8.25:fs00:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
VFS: Can't find ext3 filesystem on dev mmcblk0p3.
info filesystems_var_local:createvarlocal:Creating /var/local filesystem:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info filesystems_var_local:notransitionsexists:file=/var/local/system/no_transitions:Already exists
info filesystems_var_local:createvarlocalfirstboot:file =/var/local/system/localvar_firstboot:Creating var local first boot file
info milestone:14.44:fs23:
info system:emiting_event:migrate_DB:
debug sytem:event_emitted:migrate_DB:
info filesystems_var_local:createvarlocaldbupgrade:file =/var/local/system/LOCALVAR_DBUPGRADE:Creating var local db upgrade file
info milestone:14.53:fs25:
info milestone:14.54:mdb1:
info milestone:14.58:mdb2:
info DB_MIGRATION:Moving cc db to tmpfs::
info milestone:14.65:mdb5:
info milestone:14.67:mdb25:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:14.76:vi00:
▒▒///SOME PROBLEMS WITH SERIAL CONNECTION
crit lab126_gui_monitor:abnormalstop:job=framework,res= failed,sts=1:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info`linfo shutdown:begin:level=6,halt=,special=:
info shutdown:closing password dialog::
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:reboot
info shutdown_showimage:screen:waiting for reboot screen to come up:
info upstart_f:stopping_job:job=lab126:
info upstart_f:stopping_job:job=x:
Reset Cause readback: 0x2
info upstart_f:jobs_stopped:elapsed_ms=5020,timeout_ms= 45000:
info upstart_f:stopping_job:job=filesystems:
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:unmounting font files::
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=121240,action=stop:
info userstore:filesystem sync done::
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=6860,timeout_ms= 30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=6,halt=:
Restarting system.
Restarting Yoshi
U-Boot 2009.08-lab126 (Mar 05 2013 - 18:22:51)
CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 800000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
Board: Celeste WFO (256 MB)
Boot Reason: [POR]
Boot Device: MMC
Board Id: AAAAAAAAAAAAAAAA
S/N: B024AAAAAAAAAAAA
DRAM: 256 MB
Using default environment
In: serial
Out: logbuff
Err: logbuff
Quick Memory Test 0x70000000, 0xfffc000
POST done in 17 ms
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 70800000 ...
Image Name: Linux-2.6.31-rt11-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4616864 Bytes = 4.4 MB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
MX50 LPDDR2 MfgID: 0x3 [Elpida]
2.6.31-rt11-lab126 #1 Mon Apr 28 12:33:59 PDT 2014 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/43712 size=1432354816 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 2797552
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
argc == 12
argv[0]: "kinit"
argv[1]: "consoleblank=0"
argv[2]: "rootwait"
argv[3]: "ro"
argv[4]: "ip=off"
argv[5]: "root=/dev/mmcblk0p1"
argv[6]: "quiet"
argv[7]: "eink=fslepdc"
argv[8]: "video=mxcepdcfb:E60,bpp=8,x_mem=4M"
argv[9]: "mem=256M"
argv[10]: "user_debug=0x1"
argv[11]: "console=ttymxc0,115200"
argc == 4
argv[0]: "IP-Config"
argv[1]: "-i"
argv[2]: "Linux kinit"
argv[3]: "ip=off"
IP-Config: no devices to configure
kinit: do_mounts
kinit: name_to_dev_t(/dev/mmcblk0p1) = dev(179,1)
kinit: root_dev = dev(179,1)
kinit: /dev/root appears to be a ext3 filesystem
kinit: trying to mount /dev/root on /root with type ext3
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:5.47:49.1:
info milestone:5.53:49.2:
info milestone:5.56:49.3:
info milestone:5.61:49.4:
info milestone:5.66:49.5:
info sytem:mounted_tmpfs::
info milestone:5.74:sy50:
info system:start:time=5770:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=yoshime3,board=celeste,rev= 22,proto=Y,wifi=Y,wan=N:
info milestone:5.96:sy51:
lipc-send-event[543]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[543]: C def:dbusi::Failed to init dbus
lipc-send-event[543]: E def:open::Failed to open LIPC
lipc-send-event[543]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[551]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[551]: C def:dbusi::Failed to init dbus
lipc-send-event[551]: E def:open::Failed to open LIPC
lipc-send-event[551]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:6.68:sy99:
info system:done:time=6710:
init.exe: Failed to spawn sshd main process: unable to execute: No such file or directory
crond[586]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: recevent pre-start process (589) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
info system_cramfs_loopbacks:mounted:Image /lib/firmware/cyttsp.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:7.66:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
Welcome to Kindle!
kindle login: info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
info milestone:8.25:fs00:
debug sytem:event_emitted:loaded_ppp_async:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:8.48:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:8.55:fs25:
info milestone:8.61:vi00:
▒▒▒ѕ▒▒*▒▒ѥ▒▒}▒ٕ▒▒▒b▒▒▒▒▒}ѽՍ▒▒jR▒debug sytem:event_emitted:loaded_touch:
info milestone:9.94:vi99:
info display:started:time=9980:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info prereg:UPGRADE_PASSED:Upgrade to new file format done:
info userstore:run:time=10880,action=start:
info battery:charged:cap=92,mV=4098,mAH=1183:
info userstore:found_shutdown_flag::Found SHUTDOWN flag file
info system:emiting_event:battery_ready:
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:12.55:fs50:
info milestone:12.59:fs90:
info milestone:12.63:fs99:
info milestone:12.68:sys99:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:14.36:xx00:
info X:load:time=14490:
info X:xorg.conf:Generating xorg.conf:
info X:makexconfig:Celeste Input device detection status:
info X:makexconfig:Touch device: OK:
info X:makexconfig:Accelerometer device: N/A !!:
info X:xorg.conf:xorg.conf generated:
info milestone:15.97:xx50:
info X:starting:time=16000:
info milestone:20.36:xx99:
info X:started:time=20430:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_US.utf8,lc_all=en_US.utf8:Retr ieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
info blanket_f:module already loaded:splash:
info milestone:21.29:pi00:
info milestone:21.65:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:26.13:fr00:
info milestone:26.44:fr50:
info milestone:26.50:fr51:
info framework:starting:time=26620:
info hardware:no_wan::WiFi only device. No WAN found
info wifim:enablediv:enabling antenna diversity for wifi...:
MAC from kernel xx:xx:xx:xx:xx:F2
boot: I def:rbt:reset=user_reboot,version=232331:
crit lab126_gui_monitor:abnormalstop:job=framework,res= failed,sts=1:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=1,max=3:starting lab126_gui:
info milestone:36.48:pi00:
info milestone:36.69:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:41.38:fr00:
info milestone:41.53:fr50:
info milestone:41.58:fr51:
info framework:starting:time=41680:
info hardware:no_wan::WiFi only device. No WAN found
crit lab126_gui_monitor:abnormalstop:job=framework,res= failed,sts=1:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
warn lab126_gui:restarts=2,max=3:starting lab126_gui:
info milestone:47.24:pi00:
info milestone:47.47:pi99:
info system:emiting_event:contentpack_font_ready:
debug sytem:event_emitted:contentpack_font_ready:
info milestone:52.34:fr00:
info milestone:52.47:fr50:
info framework:starting:time=52590:
info milestone:52.59:fr51:
info hardware:no_wan::WiFi only device. No WAN found
crit lab126_gui_monitor:abnormalstop:job=framework,res= failed,sts=1:
info monitor:writing_file:file=/var/run/upstart/lab126_gui.restarts:
info blanket_f:module already loaded:splash:
info monitor:writing_file:file=/var/local/upstart/lab126_gui.restarts:
crit lab126_gui:restarts=3,max=3,reboots=2:rebooting system:
info shutdown:begin:level=6,halt=,special=:
info shutdown:closing password dialog::
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:reboot
info shutdown_showimage:screen:waiting for reboot screen to come up:
info upstart_f:stopping_job:job=lab126:
info upstart_f:stopping_job:job=x:
Reset Cause readback: 0x2
info upstart_f:jobs_stopped:elapsed_ms=4900,timeout_ms= 45000:
info upstart_f:stopping_job:job=filesystems:
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:unmounting font files::
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=68630,action=stop:
info userstore:filesystem sync done::
info userstore:found_bootup_flag::Found BOOTUP flag file
Z▒▒oT-▒Y▒^.]Y[▒E}▒▒▒▒"▒▒́▒幍nne::
▒PuTTYPuTTYPuTTY▒
▒b▒▒ձ▒▒▒▒▒▒1▒▒▒▒▒jR▒▒gstarting system.骹▒▒չ▒y▒!▒
Restartingk(
U-Boot 2009.08-lab126 (Mar 05 2013 - 18:22:51)
CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 800000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1
Board: Celeste WFO (256 MB)
Boot Reason: [POR]
Boot Device: MMC
Board Id: AAAAAAAAAAAAAAAA
S/N: B024AAAAAAAAAAAA
DRAM: 256 MB
Using default environment
In: serial
Out: logbuff
Err: logbuff
Quick Memory Test 0x70000000, 0xfffc000
POST done in 17 ms
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 70800000 ...
Image Name: Linux-2.6.31-rt11-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4616864 Bytes = 4.4 MB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
MX50 LPDDR2 MfgID: 0x3 [Elpida]
2.6.31-rt11-lab126 #1 Mon Apr 28 12:33:59 PDT 2014 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/43712 size=1432354816 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 2797552
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
argc == 12
argv[0]: "kinit"
argv[1]: "consoleblank=0"
argv[2]: "rootwait"
argv[3]: "ro"
argv[4]: "ip=off"
argv[5]: "root=/dev/mmcblk0p1"
argv[6]: "quiet"
argv[7]: "eink=fslepdc"
argv[8]: "video=mxcepdcfb:E60,bpp=8,x_mem=4M"
argv[9]: "mem=256M"
argv[10]: "user_debug=0x1"
argv[11]: "console=ttymxc0,115200"
argc == 4
argv[0]: "IP-Config"
argv[1]: "-i"
argv[2]: "Linux kinit"
argv[3]: "ip=off"
IP-Config: no devices to configure
kinit: do_mounts
kinit: name_to_dev_t(/dev/mmcblk0p1) = dev(179,1)
kinit: root_dev = dev(179,1)
kinit: /dev/root appears to be a ext3 filesystem
kinit: trying to mount /dev/root on /root with type ext3
kinit: Mounted root (ext3 filesystem) readonly.
info sytem:mounted_proc::
info system:mounted_sys::
info system:mounted_dev::
info milestone:5.47:49.1:
info milestone:5.53:49.2:
info milestone:5.56:49.3:
info milestone:5.61:49.4:
info milestone:5.66:49.5:
info sytem:mounted_tmpfs::
info milestone:5.74:sy50:
info system:start:time=5770:
info hardware:no_wan::WiFi only device. No WAN found
info system:config:platform=yoshime3,board=celeste,rev= 22,proto=Y,wifi=Y,wan=N:
info milestone:5.96:sy51:
lipc-send-event[556]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[556]: C def:dbusi::Failed to init dbus
lipc-send-event[557]: E lipc:con::Connection error(Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory)
lipc-send-event[557]: C def:dbusi::Failed to init dbus
lipc-send-event[557]: E def:open::Failed to open LIPC
lipc-send-event[557]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
lipc-send-event[556]: E def:open::Failed to open LIPC
lipc-send-event[556]: E def:fail:source=com.lab126.hal, event=usbPlugIn:Sending event failed
info milestone:6.72:sy99:
info system:done:time=6750:
init.exe: Failed to spawn sshd main process: unable to execute: No such file or directory
crond[599]: crond: crond (busybox 1.17.1) started, log level 8
init.exe: recevent pre-start process (602) terminated with status 1
info system_cramfs_loopbacks:mountingcramfs:Mounting compressed directories filesystem images:
info system_cramfs_loopbacks:mounted:Image /lib/firmware/cyttsp.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/X11/xkb.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/java/lib/fonts.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /etc/kdb.src.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/lib/locale.cramfs.img mounted:
info system_cramfs_loopbacks:mounted:Image /usr/share/keyboard.cramfs.img mounted:
info system:emiting_event:mounted_cramfs_loopbacks:
debug sytem:event_emitted:mounted_cramfs_loopbacks:
info milestone:7.70:fs75:
info system:emiting_event:loaded_modules_dependencies:
debug sytem:event_emitted:loaded_modules_dependencies:
info modules:modprobe:loading module g_file_storage:
Welcome to Kindle!
kindle login: info system:emiting_event:loaded_g_file_storage:
debug sytem:event_emitted:loaded_g_file_storage:
info modules:modprobe:loading module fuse:
info system:emiting_event:loaded_fuse:
debug sytem:event_emitted:loaded_fuse:
info hardware:no_wan::WiFi only device. No WAN found
info system:emiting_event:loaded_ppp_async:
debug sytem:event_emitted:loaded_ppp_async:
info milestone:8.21:fs00:
info system:emiting_event:loaded_fakekey:
debug sytem:event_emitted:loaded_fakekey:
info milestone:8.43:fs23:
info system:emiting_event:mounted_varLocal:
debug sytem:event_emitted:mounted_varLocal:
info milestone:8.50:fs25:
info milestone:8.55:vi00:
info milestone:9.06:vi99:
info display:started:time=9080:
info system:emiting_event:display_ready:
debug sytem:event_emitted:display_ready:
info userstore:run:time=9320,action=start:
info battery:charged:cap=91,mV=4092,mAH=1180:
info system:emiting_event:battery_ready:
info userstore:found_shutdown_flag::Found SHUTDOWN flag file
debug sytem:event_emitted:battery_ready:
info system:emiting_event:mounted_userstore:
debug sytem:event_emitted:mounted_userstore:
info milestone:10.26:fs50:
info milestone:10.29:fs90:
info milestone:10.33:fs99:
info system:emiting_event:loaded_touch:
debug sytem:event_emitted:loaded_touch:
info milestone:11.79:sys99:
info system:emiting_event:dbus_ready:
debug sytem:event_emitted:dbus_ready:
info dbus:check-update:status=2:dbus_ready sent
info hardware:no_wan::WiFi only device. No WAN found
info milestone:13.43:xx00:
info X:load:time=13540:
info X:xorg.conf:Generating xorg.conf:
info X:makexconfig:Celeste Input device detection status:
info X:makexconfig:Touch device: OK:
info X:makexconfig:Accelerometer device: N/A !!:
info X:xorg.conf:xorg.conf generated:
info milestone:14.89:xx50:
info X:starting:time=14920:
info milestone:19.11:xx99:
info X:started:time=19180:
info system:emiting_event:x_setup_ready:
debug sytem:event_emitted:x_setup_ready:
info locale:read:lang=en_US.utf8,lc_all=en_US.utf8:Retr ieved Language
info system:emiting_event:langpicker_ready:
debug sytem:event_emitted:langpicker_ready:
crit lab126_gui:reboots=2,max=2:shutting down and showing customer service page:
info shutdown:begin:level=0,halt=1,special=cust_service :
info shutdown:closing password dialog::
info blanket_f:loading blanket module:shutdown:
info shutdown_showimage:screen:splashing screen:cust_service
info shutdown_showimage:screen:waiting for cust_service screen to come up:
info upstart_f:stopping_job:job=lab126:
info upstart_f:stopping_job:job=x:
info upstart_f:jobs_stopped:elapsed_ms=4910,timeout_ms= 45000:
info shutdown:cust_service:starting:
info ss_cust_service:nothing to do for this shutdown mode:"cust_service":
info ss_cust_service:completed successfully::
info upstart_f:stopping_job:job=filesystems:
info filesystems_userstore:unmount_userstore:Unmounting UserStore:
info filesystems_var_local:unmounting font files::
info filesystems_var_local:rotate_log:Rotating Logs:
info userstore:run:time=30040,action=stop:
boot: I def:rbt:reset=user_reboot,version=232331:
info userstore:filesystem sync done::
info userstore:found_bootup_flag::Found BOOTUP flag file
info filesystems_var_local:filesystem sync done::
info filesystems_var_local:unmount_varLocal:Unmounting VarLocal:
info upstart_f:jobs_stopped:elapsed_ms=7410,timeout_ms= 30000:
info shutdown:mounting root filesystem read-only::
info shutdown:syncing disks::
info shutdown:end:level=0,halt=1:
System halted.
Halting ...