I did "erase all" too (((
I have got working serial console and fastboot. What I need to do next?
I flashed system, kernel, diags, diags_kernel from
http://ixtab.tk/kindle-touch-images/PW2/
but my pw2 still does not boot.
Code:
Hit any key to stop autoboot: 0
## Booting kernel from Legacy Image at 80800000 ...
Image Name: Linux-3.0.35-lab126
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2420416 Bytes = 2.3 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.094331] boot: C def:bcut:batterycut=1
[ 0.098349]
[ 0.257893] LPDDR2 MfgId: 0x1 [Samsung]
3.0.35-lab126 #1 Wed Aug 28 15:30:45 PDT 2013 armv7l
Press [ENTER] for recovery menu... 0 //dev/mmcblk0p4:
CHS=4/16/43456 size=1423966208 bytes
flag type first last lba first lba size
Partition p1:
0x00 0x0b 16 <large> 16 2781168
CHS: 0/1/1 - <large>
Partition p2:
Partition p3:
Partition p4:
BOOTING DEFAULT.
IP-Config: no devices to configure
[ 5.937132] EXT3-fs (mmcblk0p1): error loading journal
[ 5.952272] EXT3-fs (mmcblk0p1): error loading journal
kinit: Mounted root (ext2 filesystem) readonly.
[ 5.976732] EXT2-fs (mmcblk0p1): error: ext2_check_page: bad entry in directory #5415: : unaligned directory entry - offset=0, inode=4294967295, rec_len=65535, name_len=255
[ 5.992197] EXT2-fs (mmcblk0p1): error: remounting filesystem read-only
kinit: opening console: error 2