What happens if you use a standard micro usb cable and connect it to your computer? I'd try that first.
Also, from the MobileRead wiki it suggests you need to press the power button after pressing the reset button to awake the reader:
Quote:
1. Locate the reset button access hole. It is labeled RESET and, depending on your model, can be found on the back or bottom of your Reader device.
2. Using a thin object such as a paper clip or stylus (included with touch models), press the RESET button.
3. The screen will not change after pressing the RESET button. You must now slide the POWER switch to turn on the Reader device again.
|
MobileRead Wiki - Sony Start-Up and Reset Guide