Quote:
Originally Posted by knc1
That all sounds resonable.
I'll take a look at it myself and maybe write up some directions.
Since it isn't a hotly required item, this will be fairly low on my to-do list. (I am still having a shortage of hobby time here.)
|
Many Thanks.
last time i had read your post.
i try to download a Kubrick and put it in my USB stick.
it boots and stuck in a screen that lack of some JAVA file Etc.
so i give it up and go back to windows.
because i get a new fastboot tool from another thread.
i type in "fastboot -i VID" to try to hook my device.
then "fastboot devices". but nothing display on the screen.
i think i was fail again,so i type in "
fastboot -w" and see what happen
OMG!it works!
that's what it display now.
U-Boot 2009.08-lab126 (Sep 04 2013 - 15:37:40)
CPU: Freescale i.MX6 family TO0.0 at 996 MHz
Temperature: 45 C, calibration data 0x55a4dc5f
mx6sl pll1: 996MHz
mx6sl pll2: 528MHz
mx6sl pll3: 480MHz
mx6sl pll8: 50MHz
ipg clock : 66000000Hz
ipg per clock : 66000000Hz
uart clock : 80000000Hz
cspi clock : 60000000Hz
ahb clock : 132000000Hz
axi clock : 198000000Hz
emi_slow clock: 22000000Hz
ddr clock : 396000000Hz
usdhc1 clock : 198000000Hz
usdhc2 clock : 198000000Hz
usdhc3 clock : 198000000Hz
usdhc4 clock : 198000000Hz
MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2
Board: Unknown
Boot Reason: [ POR ]
Boot Device: NAND
Board Id: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
S/N: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
I2C: ready
Invalid board id! Can't determine system type for RAM init.. bailing!
DRAM: 0 kB
Using default environment
In: serial
Out: serial
Err: serial
Quick Memory Test 0x80000000, 0xffff0000
POST done in 4 ms
that command erase the Board Id,S/N !
what's worse,it's stuck.i can't type in anything,i can't get in fastboot mode.
it seems u-boot was destroy.
i don't know what to do now.
can it be rescued by Kubrick?
Best.