Quote:
Originally Posted by murg
especially now that the paperclip hole is no longer a feature of the design.
|
It's not? One of the
pics on Kobo's web site show one next to the USB port.
Kobo's help for the Glo HD has...
Quote:
Performing a manual factory reset
If a basic reset and a factory reset don't work, you can try a manual factory reset to restore your eReader to its original settings. After a manual factory reset, you'll need to set up and sync your eReader again. Before you perform a manual factory reset, charge your eReader for at least four hours.
- If possible, turn off your eReader.
- Note: If your eReader doesn't turn off, try pressing and holding the power button until you see Powered off on your screen.
- Insert a paper clip into the small hole beside the Micro USB slot and push gently.
- You'll feel a click and your eReader will reset itself.
- When you see square icons on the screen, insert a paper clip into the small hole beside the Micro USB slot and push gently.
- Repeat step 3 two more times.
- Your eReader's screen will turn black, and show a Critical error message. Don't worry, this is normal.
- Tap the check mark icon at the bottom of the screen to reset your eReader.
|