Quote:
Originally Posted by flip1314
Hey tshering, It doesn't matter if I install one or all three. When I tell it to handle the updates the screen rotates 90 degrees CCW and I can tap the centre to see the close option, but the GloHD is not recognizing the tap to the bottom. This is most likely because the software doesn't realize the screen has been moved. I have tried taping the centre of the screen in normal orientation, incase the touch orientation had stayed normal, but no joy.
|
Very annoying situation. Especially since the tap&close message seems to prevent the successful completion of the update. Did you by chance make a copy of the sd before you re-flashed it? Would be interesting to see the files of the .adds/kbmenu folder and the rcS.
Quote:
Originally Posted by flip1314
I did let nickel boot before the updates were loaded onto the device, and yes when I started it the second time it went to a blank screen and stayed there indefinitely. I had to do a hard reboot. The light, under the power button, kept flashing but there was no activity on the screen.
In the end I had to pull the sd card and re-flash it.
|
So you had to reflash the sd several times, once after starting nickel the second time, and once (or serveral times), when trying to update? I wonder what running nickel for the second time can change on the sd, so that KSM can not start.