Quote:
Originally Posted by Xen
Well now I am really confused. I can't find any "network" menu in KoReader. I had the wireless enabled via KSM, but now when I check that status, where it was previously showing "enabled", it now shows
sdio wifi pwr.ko: not loaded
dhd.ko: not loaded
|
When you select (in KSM > wifi) "wifi enable dhcp.sh" the modules sdio_wifi_pwr.ko and dhd.ko get loaded. When you select "wifi disable.sh", or you reboot or power off and on the device, those modules get unloaded. (Note: Before starting nickel, the modules should be unloaded. Maybe KSM should do this automatically.) In order to connect to the network, the network and the password must be known to the system. You can enter the password in KSM (wifi > wifi ap scan.sh), but this function has some limitations (as so many things in KSM): the network name and the password must not contain spaces, and the password must only contain numbers and English letters. You can enter the password (without those limitations) in nickel. Once this is done, Koreader should be able to connect to the network.