MobileRead Forums - View Single Post

groundhogxc · 02-18-2015, 08:18 AM

Hi,
the T68 has exactly the same header J25, and I can confirm it is a serial port which shows the boot messages.

I do not find my old notes unfortunately, so I can not tell you the pin out any more; but I was able to find a 3.3V serial port there, both with RXD and TXD. I did not find out what the other pins are used for.

The port seems to be configured to 115 kbps on my device, and connects to /dev/ttymxc0 on my device.

There is one more /dev/ttymxc port active, which seems to be used for the bluetooth interface in the T68.

02-18-2015, 08:18 AM	#11
groundhogxc Junior Member Posts: 6 Karma: 10 Join Date: Feb 2015 Device: T68 / NST / PRST1	Hi, the T68 has exactly the same header J25, and I can confirm it is a serial port which shows the boot messages. I do not find my old notes unfortunately, so I can not tell you the pin out any more; but I was able to find a 3.3V serial port there, both with RXD and TXD. I did not find out what the other pins are used for. The port seems to be configured to 115 kbps on my device, and connects to /dev/ttymxc0 on my device. There is one more /dev/ttymxc port active, which seems to be used for the bluetooth interface in the T68.