MobileRead Forums - View Single Post - How to jailbreak 5.6.1.0.2 (serial port) step by step

volkaoth · 01-22-2015, 05:29 AM

ok, thanks

i got it so far.
I have root-access in main with no password!

btw. to check the partition on '/' I tried to mount diag again with no localisation:

Code:

 mount /dev/mmcblk0p2

the answer was

Code:

/dev/mmcblk0p2 is allready mounted on / or busy

is seems that running diagmode need many power, got low battery warning

have to charge first befor i can continue with JB

01-22-2015, 05:29 AM	#27
volkaoth Enthusiast Posts: 39 Karma: 10 Join Date: Jan 2015 Location: ulm, germany Device: KT2	ok, thanks i got it so far. I have root-access in main with no password! btw. to check the partition on '/' I tried to mount diag again with no localisation: Code: mount /dev/mmcblk0p2 the answer was Code: /dev/mmcblk0p2 is allready mounted on / or busy is seems that running diagmode need many power, got low battery warning have to charge first befor i can continue with JB Attached Thumbnails Last edited by volkaoth; 01-22-2015 at 05:43 AM.