MobileRead Forums - View Single Post

kuskro · 01-05-2015, 01:38 PM

Hi @japinder,

Let me explain why I chose "seeder (on moderate mode)", it was because it forces the CPU to stick to higher clock frequencies due to the constant I/O using. By default, our iMX6 Cortex is working on CFQ I/O scheduler and PERFORMANCE govenor but it is not enough, so seeder forces the CPU a bit more, despite the fact it uses more battery.

About what you commented upon windowsmgr.max_events_per_sec=90, it is true that with 90 is enough in common phones but not on our case I think.

And, about "debug.sf.hw=1", it is set on 1 when you are not sure if compositing is set on 0 by default, that was the case.

Many thanks for your help.

Best.

01-05-2015, 01:38 PM	#429
kuskro Connoisseur Posts: 96 Karma: 14918 Join Date: Dec 2014 Device: Onyx Boox T68 & M96	Hi @japinder, Let me explain why I chose "seeder (on moderate mode)", it was because it forces the CPU to stick to higher clock frequencies due to the constant I/O using. By default, our iMX6 Cortex is working on CFQ I/O scheduler and PERFORMANCE govenor but it is not enough, so seeder forces the CPU a bit more, despite the fact it uses more battery. About what you commented upon windowsmgr.max_events_per_sec=90, it is true that with 90 is enough in common phones but not on our case I think. And, about "debug.sf.hw=1", it is set on 1 when you are not sure if compositing is set on 0 by default, that was the case. Many thanks for your help. Best. Last edited by kuskro; 01-05-2015 at 01:45 PM.