Quote:
Originally Posted by davidfor
What release notes? Or are referring to my post with a list of changes?
|
Yes it was that post but don't get in defend modus, I did read the "disclaimer" (So no need for a flashing red light,man relax a bit ! )
But on the other hand you are such an ehh.. authority that it is hard to judge if what you write is based on own experience or something that is stated by Kobo and tested by you.
Also meaning that I could never find a Kobo real release note.
And that gives another point,normally you get this firmware "unasked" so in my opinion it is important that Kobo tells you what they put on your device.
So please, i am again not attack you.
My main issue was, why does it disconnect and restart at a bunch of people,while it doesn't happens here at my home,with two devices and 3 computers and if it is intended as a feature for this firmware, why does it not work the way it has to do.
In that "light" I put my post,
not for attacking you at any way and if you feel like that, my deepest excuses. (apologies)
But if it is a feature implemented by Kobo,then it is "important" to tell that it doesn't work the way it should be by everyone.
If it is only a feature used in Calibre, then I misunderstood and again sorry.
I can hear a difference between using the save eject, or Calibre eject,with Calibre it more sounds as a "disconnect" then a eject from the menu.
Quote:
Originally Posted by jackastor
When using a USB Hub please ensure its powered by an external source and that the source provides enough power to the 14 devices that you may or may not have attached at any one time. Any more then one device attached with out power to the hub will result in interesting and potentially damaging effects on devices that are underpowered due to insufficient power supply from the computer.
regards
Jack
|
It is powered by a external source at 3 ways. (Hubport/14 14 Port USB 2.0 Hub)
It has a power supply of 6 amps, leaving 4 gates also more powered to charge devices, per port it gives 600 milli amps and 1.5 amps at the charging ports.
Beside that it is connected to a UPS (APC Smart-UPS 1500VA USB & Serial 230V)