[Glottis]

Thanks for getting back to me, your explanation was very clear.

The H2O does seem to do full refreshes at the same interval as the Glo (changeable between 1 and 6 pages). That said, there is still ghosting directly after a full refresh on the H2O, so I don't know what that means.

I've taken some pictures of the ghosting along with a few comparison images from my Glo. The colour tone is different but newer model better contrast etc. Most of the images are taken at about 20% brightness but the ghosting is just as visible on the H2O down to around 5% when it becomes difficult to read in total darkness.

Both AFTER full refresh
As you can see, the H2O (left) has ghosting even after the full refresh when the screen flashes, while the Glo has none at all.
[Image violates Posting Guidelins for size - MODERATOR]

H2O AFTER full refresh
Close up on post refresh ghosting
[Image violates Posting Guidelins for size - MODERATOR]

H20 BEFORE full refresh (5 page turns)
Close up on pre refresh ghosting, MAJOR ghosting
[Image violates Posting Guidelins for size - MODERATOR]

Glo BEFORE full refresh (4 page turns - usual brightness)
This is what I normally use on the Glo, as you can see even after 4 page turns you can't really see any ghosting at all.
[Image violates Posting Guidelins for size - MODERATOR]

Glo BEFORE full refresh (4 page turns - MAX brightness)
Even on MAX brightness the Glo has barely any ghosting before the page refresh.
[Image violates Posting Guidelins for size - MODERATOR]