Quote:
Originally Posted by DNSB
The lowest light setting on the H2O is 0% -- best they could do without a hardware or software light switch.
|
Just for clarity for those without an H2O reading this: the 0% does turn the LED's off. You can see this if you look down the screen at the LED's and turn it down to 0% and it's very clear that dim down and then when you get to 0% they go off. Just pointing this out for those who prefer no front light.
I advocated for an on/off toggle in the firmware that would allow you to turn the light off then back on to the same setting but as DNSB indicated that hasn't happened.