Quote:
Originally Posted by Aeliine
- slide and hold power button
- hold power button and -"light" button at the same time for 20 seconds.
|
That's not quite right. The steps are:
1) Make sure the battery has charge.
2) Hold the power button in the off position for at least 20 seconds. This is to make sure the device is off.
3) While holding the light button down, turn the device on.
4) Release the light button when the LED starts to flash.
If it doesn't work the first time, try again, but hold everything a little longer.
If that doesn't work, try plugging into a computer and tapping where the "Connect" button should be. It's possible the device is working, but the screen isn't. (Missed the bit about the screen flashing)
The next is to open the device, check everything is connected and reimage the internal card. Or replace the card.