Aydan
Thanks
I am using a ttl to USB that is set to 3.3 v volts. I proved it was OK before use with a 'scope.
I can send "hello" from Mac to Kobo as I said above.
I am never offered a log in option
I see
Hit any key to stop autoboot: 0
in the first boot sequence.
I hit keys to no effect.
Must you hit a key to see a log in request?
=======================================
At Debian power down I see ---
xinit: connection to X server lost
waiting for X server to shut down Server terminated successfully (0). Closing log file.
E-ink display autoupdate disabled.
dosfsck 3.0.6, 04 Oct 2009, FAT32, LFN
umount: none busy - remounted read-only
There are differences between boot sector and its backup.
Differences: (offset
riginal/backup)
65:01/00
Not automatically fixing this.
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system poweroff
Power down.
================================================== =====
Switch on then see ---
U-Boot 2009.08-dirty-svn ( 8月 29 2012 - 11:15:18)
CPU: Freescale i.MX50 family 1.1V at 800 MHz
mx50 pll1: 800MHz
mx50 pll2: 400MHz
mx50 pll3: 216MHz
ipg clock : 66666666Hz
ipg per clock : 66666666Hz
uart clock : 24000000Hz
ahb clock : 133333333Hz
axi_a clock : 400000000Hz
axi_b clock : 200000000Hz
weim_clock : 100000000Hz
ddr clock : 200000000Hz
esdhc1 clock : 80000000Hz
esdhc2 clock : 80000000Hz
esdhc3 clock : 80000000Hz
esdhc4 clock : 80000000Hz
Board: MX50 RDP board
Boot Reason: [POR]
Boot Device: SD
I2C: ready
DRAM: 256 MB
MMC: FSL_ESDHC: 0, FSL_ESDHC: 1, FSL_ESDHC: 2
In: serial
Out: serial
Err: serial
[_get_sd_number] g_sd_number:0
MMC read: dev # 0, block # 1023, count 1 partition # 0 ...
1 blocks read: OK
MMC read: dev # 0, block # 1024, count 1 partition # 0 ...
1 blocks read: OK
no ramdisk env ,default rd->70d00000
MMC read: dev # 0, block # 8191, count 1 partition # 0 ...
1 blocks read: OK
no ramdisk image signature ! skip load initrd !
MMC read: dev # 0, block # 12287, count 1 partition # 0 ...
1 blocks read: OK
no ramdisk image signature ! skip load initrd !
ram p=70000000,size=268435456
MMC read: dev # 0, block # 18431, count 1 partition # 0 ...
1 blocks read: OK
no "logo" bin header
MMC read: dev # 0, block # 14335, count 1 partition # 0 ...
1 blocks read: OK
MMC read: dev # 0, block # 14336, count 2076 partition # 0 ...
2076 blocks read: OK
Kernel RAM visiable size=254M->254M
init TPS65185 power ...
Hit any key to stop autoboot: 0
MMC read: dev # 0, block # 2047, count 1 partition # 0 ...
1 blocks read: OK
no kernel image signature !
MMC read: dev # 0, block # 2048, count 8192 partition # 0 ...
8192 blocks read: OK
## Booting kernel from Legacy Image at 70800000 ...
Image Name: r?_#33 May 10 15:21:51
Created: 2013-05-10 13:21:55 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1886500 Bytes = 1.8 MB
Load Address: 70008000
Entry Point: 70008000
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[zForce_ir_touch_recv_data-164] command BootComplete (0)...
NtxHwCfg_GetCfgFldStrVal:[WARNING]Config version too old !! Please update config file !!
1+0 records in
1+0 records out
512 bytes (512B) copied, 0.000271 seconds, 1.8MB/s
cannot open /dev/null
[PROGRESS_BAR-2857] No progess ...
E-ink display autoupdate enabled.
init kbd.
init mouse failed.
[zForce_ir_touch_recv_data-186] command overrun (1) ...
================================================== =====
Press computer icon then see -
NtxHwCfg_GetCfgFldStrVal:[WARNING]Config version too old !! Please update config file !!
1+0 records in
1+0 records out
512 bytes (512B) copied, 0.000271 seconds, 1.8MB/s
cannot open /dev/null
[PROGRESS_BAR-2857] No progess ...
E-ink display autoupdate enabled.
init kbd.
init mouse failed.
[zForce_ir_touch_recv_data-186] command overrun (1) ...
E-ink display autoupdate disabled.
dosfsck 3.0.6, 04 Oct 2009, FAT32, LFN
There are differences between boot sector and its backup.
Differences: (offset
riginal/backup)
65:01/00
Not automatically fixing this.
/dev/mmcblk0p2: 108 files, 2021/523004 clusters
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
swapon: /dev/mmcblk0p3: Invalid argument
E-ink display autoupdate enabled.
E-ink display autoupdate enabled.
X.Org X Server 1.12.4
Release Date: 2012-08-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32 armv5tel Debian
Current Operating System: Linux kobo 2.6.35.3-850-gbc67621+ #33 PREEMPT Fri May 10 15:21:51 CEST 2013 armv7l
Kernel command line: console=ttymxc0,115200 rootwait rw quiet lpj=3997696 root=/dev/mmcblk0p1 rootfstype=ext4 hwcfg_p=0x7ffffe0
0 hwcfg_sz=512 waveform_p=0x7fefc600 waveform_sz=1062912 mem=254M
Build Date: 17 April 2013 11:27:49AM
xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.26.0
Before reporting problems, check
http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 1 20:18:50 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"