Quote:
Originally Posted by Prestidigitweeze
Several Amazon customers have whinnied that the T-2 doesn't offer an indentation or holder for the stylus, which blows lavender donkey trusses, if you ask me (so don't). Sounds as though a third-party case might be mandatory. Does the official case have a place, Sun Ra?
|
I'm using an M-Edge Go! jacket for the Kindle Touch/4 (with the straps, not the plastic "grabber" model). Since the T2 is slightly thinner (and taller) than the Kindles, that leaves a small space within the case where I can slip the stylus through the straps. Works really well. (Although I personally almost never use the stylus.)
This is like the one I have, except my texture is a little different ...
http://www.ebay.com/itm/M-Edge-Black...item20d235bebb
This is about the price I paid for it also. But they come in different colors and textures if you don't the black "alligator" one. (There's tons of them on eBay and probably Amazon.) Light weight and good quality. Before you buy, ask the seller if they come with the straps (maybe all these did, since they were made for several models -- the NST Go! jacket changed to the plastic "grabber," that's probably the one I'm thinking about). I think the "4 point mounting system" means four straps.
At Amazon ...
http://www.amazon.com/s/ref=nb_sb_no...!%20kindle%204
Should mention ... the power switch sits behind the bottom, right strap. Which is not a problem, I just push the strap where the switch is. A little bigger pain in the neck is that, that is also where the charging LED is located -- so you kind to have to look sideways to see the charging light -- or pull it out of the case if you're not as lazy as I am.