Quote:
Originally Posted by angor00
I understand. Moreover, I wrote that post on the e-book forum. Android is on the external SD and will boot if backlight button is pressed when the device is been turning on. If backlight button isn't pressed the standard firmware will boot from the internal SD. By the way, the device doesn't need to open.
|
Hi,angor00,I use your image file for KOBO Touch in Touch N905B,but it halted at system started and can not successfully boot.Can you help?btw,The MarekGibek's img for touch can boot,through modify the hex to "05" at offset 0x80017
your touch image's TTL output:
========== upd_data.update_region( l, t, w, h ) = ( 0, 0, 758, 1024 )============
tps65185_set_reg gpI2C_adapter null
PMIC sleep->standby, retry 0
tps65185_set_reg gpI2C_adapter null
PMIC sleep->standby, retry 1
tps65185_set_reg gpI2C_adapter null
PMIC sleep->standby, retry 2
tps65185_set_reg gpI2C_adapter null
PMIC sleep->standby, retry 3
tps65185_set_reg gpI2C_adapter null
PMIC sleep->standby, retry 4
tps65185_set_reg gpI2C_adapter null
PMIC sleep->standby, retry 5
tps65185_set_reg gpI2C_adapter null
PMIC sleep->standby, retry 6
tps65185_set_reg gpI2C_adapter null
PMIC sleep->standby, retry 7
tps65185_set_reg gpI2C_adapter null
PMIC sleep->standby, retry 8
tps65185_set_reg gpI2C_adapter null
PMIC sleep->standby, retry 9
[Error] tps65185_get_temperature : change to standby mode fail !
tps65185_set_reg gpI2C_adapter null
PMIC sleep->active, retry 0
tps65185_set_reg gpI2C_adapter null
PMIC sleep->active, retry 1
tps65185_set_reg gpI2C_adapter null
PMIC sleep->active, retry 2
tps65185_set_reg gpI2C_adapter null
PMIC sleep->active, retry 3
tps65185_set_reg gpI2C_adapter null
PMIC sleep->active, retry 4
tps65185_set_reg gpI2C_adapter null
PMIC sleep->active, retry 5
tps65185_set_reg gpI2C_adapter null
PMIC sleep->active, retry 6
tps65185_set_reg gpI2C_adapter null
PMIC sleep->active, retry 7
tps65185_set_reg gpI2C_adapter null
PMIC sleep->active, retry 8
tps65185_set_reg gpI2C_adapter null
PMIC sleep->active, retry 9
drivers/video/mxc/mxc_epdc_fb.c(915):[warning] change to power active fail,errno=-1 !