[erikssenmar867]

Originally Posted by GeoffR

Here are two extra patches I use on my Glo, for firmware 3.1.1 (761b066420):

A replacement for the standard line spacing patch which is a little more complicated to configure but allows an extra 4 values on the line spacing slider;

Spoiler:

<Patch>
patch_name = `My 14 line spacing values` 
patch_enable = `yes`
# Bypass code-injected values 1.0, 1.2, 1.5, 2.0, 3.0
#replace_bytes = 73FA4E, 35 F6 BE EB, 00 46 00 46
#replace_bytes = 73FA9C, 35 F6 96 EB, 00 46 00 46
#replace_bytes = 73FAC2, 35 F6 84 EB, 00 46 00 46
replace_bytes = 73FAF8, 35 F6 68 EB, 00 46 00 46
#replace_bytes = 73FB54, 35 F6 3A EB, 00 46 00 46
#
# Table A
# E0 = 0.50,   E1 = 0.53125,  E2 = 0.5625,  E3 = 0.59375
# E4 = 0.625,  E5 = 0.65625,  E6 = 0.6875,  E7 = 0.71875
# E8 = 0.75,   E9 = 0.78125,  EA = 0.8125,  EB = 0.84375
# EC = 0.875,  ED = 0.90625,  EE = 0.9375,  EF = 0.96875
# F0 = 1.0,    F1 = 1.0625,   F2 = 1.125,   F3 = 1.1875
# F4 = 1.25,   F5 = 1.3125,   F6 = 1.375,   F7 = 1.4375
# F8 = 1.5     ...
#
# Table B                      ...            E7=0.725
# E8 = 0.75625,  E9 = 0.7875,  EA = 0.81875,  EB = 0.85
# EC = 0.88125,  ED = 0.9125,  EE = 0.94375,  EF = 0.975
# F0 = 1.0125,   F1 = 1.075,   F2 = 1.1375,   F3 = 1.2
# F4 = 1.2625    F5 = 1.325    F6 = 1.3875,   F7 = 1.45
# F8 = 1.5125    ...
#
# First code-injected value 1.0
# Replace byte with a value from table A:
replace_bytes = 73FA42, F0, E8
#
# Second code-injected value 1.2
# Replace byte with a value from table B:
replace_bytes = 73FA92, F3, EB
#
# Third code-injected value 1.5
# Replace byte with a value from table A:
replace_bytes = 73FAB8, F8, ED
#
# Last code-injected value 3.0
# Select Table A:
replace_bytes = 73FB48, C4 F2, C3 F6
replace_bytes = 73FB4B, 03, 73
# Replace byte with a value from table A.
replace_bytes = 73FB4A, 08, F4
#
# Other values for replace
#                       1.0   0.75
replace_float = 73FB98, 1.05, 0.765
replace_float = 73FBA0, 1.07, 0.80
replace_float = 73FBA8, 1.1,  0.83
#                       1.2   0.85
replace_float = 73FBB0, 1.35, 0.865
#                       1.5   0.90625
replace_float = 73FBB8, 1.7,  0.925
replace_float = 73FBC0, 1.8,  0.95
#                       2.0   ----
replace_float = 73FBC8, 2.2,  1.0
replace_float = 73FBD0, 2.4,  1.05
replace_float = 73FBD8, 2.6,  1.1
replace_float = 73FBE0, 2.8,  1.175
#                       3.0   1.25
</Patch>

and a patch to prevent the AndroidBookLoadTablet_Aspect.parsed cover image file being downloaded or generated, which fixes a problem with the cover image for kepubs not being displayed on the book details screen if wifi is turned off.

Spoiler:

<Patch>
patch_name = `Avoid generating/downloading redundant cover image`
patch_enable = `yes`
replace_string = 1104FA4, `AndroidBookLoadTablet_Aspect`, `N3_LIBRARY_FULL`
</Patch>

Hi GeoffR,
i'd want to use the patch "My 14 line spacing values", but i do not understand how to edit it.
i'd want to use these values for line spacing: 0,7; 0,8; 0,9; 1,05; 1,07; 1,1; 1,15; 1,2; 1,25; 1,3; 1,35; 1,4; 1,45; 1,5
Can you help me?
And an other question: if i enable this patch, do i have to disable the other patch "My line spacing values"?