|
I took your idea and modified it for my wife's reader. I got a couple cheap picture 'frames' from the local Walgreen's that are essentially polycarbonate boxes with a carboard box that goes into it. I measured and cut the sides down to just about 1/2" and cut the end off of one and both ends off the other. I then put some adhesive foam pads from the Dollar store on the inside and used clear packing tape to seal the entire thing together to make a rigid polycarbonate box that is open on one end. I basically made a very rigid slipcover for the reader. It fits very nicely into an Oriental-style satin bag from Target's dollar section to make a very pretty yet protective hardcase.
|