Thread: Firmware not updating (M92)
View Single Post
Old 12-09-2013, 10:21 AM   #4
martienne
.~^пиратка^~.
martienne can read faster than his screen refreshesmartienne can read faster than his screen refreshesmartienne can read faster than his screen refreshesmartienne can read faster than his screen refreshesmartienne can read faster than his screen refreshesmartienne can read faster than his screen refreshesmartienne can read faster than his screen refreshesmartienne can read faster than his screen refreshesmartienne can read faster than his screen refreshesmartienne can read faster than his screen refreshesmartienne can read faster than his screen refreshes
 
martienne's Avatar
 
Posts: 238
Karma: 14000
Join Date: Sep 2009
Location: Ask NSA...
Device: Onyx Boox M92
Quote:
Originally Posted by Booxtor View Post
Hi,

are you sure you did it exactly as instruction says:

Don't rename the update file. Just copy it as is to your SD Card.

M92 shuold be powered off, before starting the process.
Press joystick OK button and hold it, then press power button.



When it shows “software update request detected, Checking updates” at the bottom of the screen, release OK button. It takes around 5-7 minutes to finish the updating. The device will shut down automatically after the update is completed

If update failures

Please check whether there is firmware in SD/TF card; whether the firmware is correct; whether the CD Card is recognized by M92.


If it still does not work, please contact me.
(Hi, yeah I bought it from you shop actually :-)

Your tip solved the problem.
It worked after I held down the Joystick OK button at startup. Somehow I missed that I was supposed to do that.

But once I did, it recognised the new update and everything went well.
martienne is offline   Reply With Quote