Quote:
Originally Posted by martienne
Hi all, I downloaded the latest firmware and put on an empty SD card that is recognised by the M92. I rebooted as per instructions, but nothing.
Firmware remains the release from May which was on the device when I got it.
The takes on naming convention seems to vary, manual says update_onyx.upd and Onyx site says update-2012xxxx.zip in zip format.
Well, nothing works!
Any tips appreciated!
|
Hi,
are you sure you did it exactly as instruction says:
Don't rename the update file. Just copy it as is to your SD Card.
M92 shuold be powered off, before starting the process.
Press joystick OK button and hold it, then press power button.
When it shows “software update request detected, Checking updates” at the bottom of the screen, release OK button. It takes around 5-7 minutes to finish the updating. The device will shut down automatically after the update is completed
If update failures
Please check whether there is firmware in SD/TF card; whether the firmware is correct; whether the CD Card is recognized by M92.
If it still does not work, please contact me.