Proper parts located by twobob, based on a K5-Touch, Demo unit which had the connector body mounted on the board.
SMT Connector body:
http://www.molex.com/molex/products/...cts&Lang=en-US
SMT Connector body drawing:
http://docs-europe.electrocomponents...6b80dca492.pdf
Mating connector:
http://www.molex.com/molex/products/...P_HOUSINGS.xml
Wire terminals for mating connector:
http://www.molex.com/molex/products/..._TERMINALS.xml
Hand crimp tool for wire terminals:
http://www.molex.com/molex/products/..._TERMINALS.xml
Installing the connector body on the board requires a tiny amount of solder paste and some hot air.
Here is one site that carries those materials, along with "HowTo" video and links to lots of information at bottom of page:
http://www.zeph.com/zephpaste.htm
Just use your web search tool(s) to find a distributor of these Molex parts (search by manufacturer + part number).
Check with local electronics re-work shop about having it done or watch the video and ad-lib it yourself.